how do you reset an american standard air conditioner

If your American Standard AC unit doesn’t have a reset button, you can manually reset it by doing the following:

1. Turn off your air conditioning system using the thermostat.
2. Turn off your American Standard AC at the circuit breaker. ...
3. Wait at least a minute before turning the breaker back ON.
4. Wait 30 minutes before you turn the thermostat back on to turn on your unit again. ...
5. Once the 30 minutes are up, turn your thermostat carefully back to “COOL.” ...

Full Answer

How do I Reset my air conditioner to factory settings?

Power down your AC. Start at your circuit breaker panel and flip the breaker that powers your AC. Also, flip the power switch your AC unit is connected to outside to the off position. Find the button. Most air conditioning units are equipped with a reset button. These buttons tend to be red and quite small.

Is there a reset button on a window AC unit?

Since most window air conditioners do not have a reset button, you’ll need to unplug it for a few minutes to dissipate the charge. After plugging it back in and turning the circuit back on, the window AC unit should reset and be operational again.

Are You always resetting your central air conditioner?

And if you constantly reset the unit, this could make the situation even worse. That said, if you’re always resetting AC unit, have an HVAC technician check it out. They can diagnose the problem and find the fastest, most affordable solution for your needs. Fortunately, learning how to reset central air conditioner is pretty easy.

How do I Turn Off my air conditioner?

The first step is to power down your air conditioner. First, make sure your thermostat is in the “off” position. Then, turn off your air conditioner. This can be done by finding the shutoff switch on your AC unit. Shutting off your system is a vital safety precaution that you should always follow.

How do I reset my American Standard HVAC system?

All Thermostat ModelsMAKE SURE THAT THE HVAC SYSTEM IS IDLE BEFORE PROCEEDING!Locate the switch for your thermostat in the breaker box.Flip the switch to the OFF position for 20-30 seconds.Return the switch to the ON position.The reboot process will take several minutes to complete.

Where is the reset button on an American standard AC?

Look for it first around on the exterior of your machine, especially along the bottom edge near the ground. An AC's reset button is typically red and visible, so it should be easy to spot. If you don't see a reset button on the outside, it could be located inside the unit behind the service panel.

How do you manually reset an air conditioner?

How to Reset an Air ConditionerPower down your AC. Start at your circuit breaker panel and flip the breaker that powers your AC. ... Find the button. Most air conditioning units are equipped with a reset button. ... Hold down the reset button for 3 to 5 seconds and then release.Restore power to your AC.

Why is my American standard AC not working?

Check the breaker or fuse box. A tripped breaker or blown fuse may have interrupted the power to the AC unit. Check your thermostat settings. The AC may be off at the thermostat, or you may not have turned the thermostat low enough to power on the AC.

Where is the reset button?

Alternatively referred to as the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.

Is there a reset button on outside AC unit?

Some air conditioning systems have a reset switch, which is a small, red button. Typically, the button will be on the outdoor unit. If you have a problem locating it on the outdoor unit, you may find relevant details on the equipment's manufacturer's manual. Press the red button for three seconds and release.

How do you reset an air conditioner safety switch?

How Do I Reset My Air Conditioning UnitStep One—Turn Off Unit. The first step is to power down your air conditioner. ... Step Two—Find the Circuit Breaker Box. The next step is to locate the circuit breaker box for your air conditioner. ... Step Three—Wait It Out. ... Step Four—Switch Unit Back On. ... Step Five—Confirm It's Working.

What to do if AC is not cooling?

The following are a few things to check when your air conditioner is not cooling your space.Check and reset the thermostat. ... Replace the dirty filter. ... Clear the clogged condensation drain. ... Try to diagnose duct malfunctions. ... Clear the area around the compressor.

Where is the AC breaker located?

0:161:41How to spot a tripped A/C breaker- Check this before calling ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipMost systems will have a disconnect switch out at the condensing unit. You can also check to see ifMoreMost systems will have a disconnect switch out at the condensing unit. You can also check to see if this is venturing. Sometimes there's a pullout that can be pulled out to disconnect.

How do you turn on a American Standard air conditioner?

0:022:24How to Use Your American Standard 850 Thermostat - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this thermostat. Here has no batteries it gets power from the furnace itself so you don't have toMoreSo this thermostat. Here has no batteries it gets power from the furnace itself so you don't have to worry about changing any batteries in this unit right here.

Why won't my AC turn on in my house?

Check your breaker box for a blown breaker or tripped fuse. You may be able to fix this AC issue with the flip of a switch. If that doesn't do the trick, check the wiring in your thermostat. A loose or frayed wire could also prevent your unit from turning on.

What causes hard lockout?

A hard lockout happens after several repeated soft lockouts. For most furnaces, you will have three attempts to relight the unit before it goes into hard lockout. If this happens, you will have to reset the unit manually. The best way to do this is by calling your go-to HVAC technicians to perform the reset sequence.

Who makes American standard AC?

Trane TechnologiesTrane is a subsidiary of Trane Technologies and is the sister company to the American Standard Companies. It makes products under the Trane and American Standard brand names with over 120 years of experience in the industry!

What does it mean when my thermostat says wait?

The "Wait" message on a Honeywell Thermostat means the thermostat is waiting to activate the HVAC system. This is done to prevent damaging the HVAC system compressor. If the system is working properly, then "Wait" should disappear after a few minutes.

Why does my thermostat go blank?

If your thermostat is blank, the first thing you should do is check the batteries. Chances are, the batteries have died and the thermostat simply can't power on. Replace the batteries and see if your thermostat turns on.

How do you change the filter on a American Standard Silver Series?

0:251:29How to Change a Furnace Filter For Dummies - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou usually find the filter near where the cool air enters the furnace in the cold air return ductMoreYou usually find the filter near where the cool air enters the furnace in the cold air return duct or the entrance to the blower chamber or sometimes in both locations.

How to Reset American Standard Air Conditioner?

If your American Standard AC unit doesn’t have a reset button, you can manually reset it by doing the following:

Why Would You Want To Reset Your American Standard AC Unit?

There are a few reasons you would want to reset your American Standard AC, but a tripped breaker is the main one. An air conditioner has its own circuit breaker, just like most other electrical appliances. It is a safety switch that protects your unit by turning it off when it detects an overload.

Is There a Reset Button?

Some air conditioner models come with a handy reset button. If your system has this, then learning how to reset AC unit just became a little easier. To locate it, head over to your outdoor system and look for this button. They are typically large, red, and very noticeable. If you can find it, press the button to see if that fixes the problem. If you don’t have one of these buttons, you’ll have to try the manual method to reset AC unit.

How Often Do You Reset Air Conditioner?

While it’s normal to reset AC unit, doing it too often may indicate there’s a bigger problem at hand. And if you constantly reset the unit, this could make the situation even worse. That said, if you’re always resetting AC unit, have an HVAC technician check it out. They can diagnose the problem and find the fastest, most affordable solution for your needs.

How long does it take for an air conditioner to reset?

Once the 60 seconds have passed and you've flipped the switch, wait another 60 seconds. This allows the unit to reset on its own. After waiting a full minute, head over to your thermostat and turn the air conditioner back on.

What to do if you notice exposed wires?

If you notice any exposed wires, drop what you’re doing and step away. Just like if the breaker panel cover is removed, exposed wires can also cause an electrocution, which could be life-threatening. If you notice this problem, call an HVAC technician right away for assistance.

What to do if your breaker box is missing?

If you ever notice that the cover on your circuit breaker box is missing, make sure to never touch any breakers. In fact, don’t step close to your breaker box and call a professional right away. This issue poses some serious risks, including a fatal electrocution.

Why does my AC breaker keep tripping?

This could indicate a more serious problem is happening. If the breaker keeps tripping, you may also notice that it cools off very slowly.

How to know if your AC unit is working properly?

To do so, set your thermostat to your desired temperature and wait a few minutes. If you notice cool, comfortable air coming from your vents, this is confirmation that the AC unit is working properly.

Resetting all American Standard thermostat models

We want to highlight that your HVAC system should always be idle before you proceed with resetting.

Leave off

Going back to the basics, you should turn the thermostat on and off again. You must wait at least 30 seconds to make the thermostat “forget” all temporary settings in its short memory.

Hold reset

Many thermostats come with a Reset button—you might need a paperclip to push it. Press and hold the button for five seconds before you release it. This is typically the difference between a fast, quick on/off and a complete factory reset.

Change batteries

When you use a battery-powered thermostat, remember to check them out from time to time. Replace the old batteries with new ones—it might help your thermostat.

Flip the switch

If your HVAC system is connected to a circuit breaker box, you will have to reset the thermostat. Switch the air conditioner off and the breakers that control it. Wait for more than 30 seconds before turning back on the box and the device.

Reverse batteries

Take the batteries out, place them back and then flip them back to normal. It might result in a full factory reset.

After the reset

Even if you see results, you should still pay attention to your system for several hours. Keep a watch out for unusual sounds, smells, and noises from the air conditioner system. Also, see if there are any significant differences in efficiency and temperature output.

Why Do I Need to Reset My Air Conditioner?

The most common reason for an AC unit requiring a reset is when the protection circuit breaker in your AC unit kicks in. This typically happens after a power outage and is in place to prevent fires and explosions.

What to do if your reset doesn't work?

When the reset doesn’t seem to be working, it’s time to contact the HVAC professionals at One Hour Heating & Air Conditioning.

Do window air conditioners reset?

Since most window air conditioners do not have a reset button, you’ll need to unplug it for a few minutes to dissipate the charge.

Do air conditioners need a reset?

Like many appliances around your house, air conditioners are getting smarter and sometimes require a good old-fashioned reset. Even older models that suddenly stop working can benefit from a reset, especially after a power outage.

Why is my American Standard blower not working?

There is another potential cause of airflow problems in your American Standard system: a damaged or completely non-functioning air handler/blower. This issue is sometimes caused by a dirty air filter. Other possible sources of air handler/blower malfunctions include obstructions inside the blower assembly and an incorrect blower fan speed.

How to check for a leak in an air conditioner?

First, look for cracks or leaks in the tube or pipe responsible for channeling condensation out of the unit. Next, look for any signs of obstruction within the tube/pipe. If ice is blocking the line, you can follow up by checking for dirty air filters and a lack of adequate refrigerant. If your particular American Standard air conditioner comes equipped with a condensate pump, your indoor leak may also be the result of a pump malfunction or breakdown.

How much water does an air conditioner produce?

Depending on where you live, the water produced by this process can total as much as several gallons a day. This large amount of water must have somewhere to go.

What is American standard air conditioner?

American Standard air conditioners are high-quality products that typically provide excellent performance for extended periods of time. However, even the most well-made A/C system can develop problems. American Standard products contain unique technologies that help them do their job with maximum efficiency.

Can you do it yourself with an A/C?

Sometimes, do-it-yourself remedies can correct the issues you uncover while diagnosing malfunctions in your American Standard A/C system. However, in certain cases, the issues you find may indicate the need for help from a trained expert.