How to Reset Invisible Fence
- Turn it off, unplug it and wait 10 minutes for any power to drain from the receiver collar receiver batteries before proceeding
- Repeat this step if it does not work
- Replace the battery
How do I replace the wire on my Invisible Fence?
Bring your Invisible Fence transmitter and Computer Collar receiver with you to your new home and contact us at 866-804-1250 to install new boundary wire, flag your property and re-train your pet (s) to their new boundaries. To request a service appointment online, click here. How can I fix a wire break in my Invisible Fence?
How to fix a dog fence transmitter that won’t turn on?
Whenever you are turning off the power to the fence, bring your dog inside. With your dog safely inside, unplug the transmitter and then take a look for any metal objects that might be on top of or around the fence that could be causing interference. Plug the system back in and check to make sure that the transmitter is working properly once again.
How do I know if my Invisible Fence receiver is working properly?
When you first put the battery into the invisible fence receiver, you should notice that the status light is flashing green. This is meant to indicate that the receiver has started up in the proper manner. If you happen to notice that the lights have not started blinking, it could mean that the battery hasn’t been put incorrectly.
Can I Move my Invisible Fence to a new home?
Yes! Bring your Invisible Fence transmitter and Computer Collar receiver with you to your new home and contact us at 866-804-1250 to install new boundary wire, flag your property and re-train your pet (s) to their new boundaries. To request a service appointment online, click here.
Why is my Invisible Fence transmitter beeping?
If your Invisible Fence control panel is beeping with a lengthy pause between each beep, it's possible your backup battery unit needs to be replaced. Your fence will still work, but if your power goes out, the system will no longer be operational until power is restored.
How do I reset my wireless dog fence?
How do I reset my PetSafe wireless collar? Simply remove the battery and hold down the power button for a few seconds after the LED indicator has gone out. Then, replace the battery, with a fresh one if need be, and turn the collar on again.
What does blinking green light mean on Invisible Fence transmitter?
The status light will double flash green every 30 seconds during the 24-hour period after the dog has entered the boundary area. This feature monitors the voltage level of the battery.
Why is my transmitter beeping?
Rapid beeping usually indicates a broken wire, but on occasion, it indicates a bad transmitter. Because the transmitter works by sending a current through a closed loop and checking to see if it comes back, you can do a short loop test to check your transmitter.
How do I know if my petsafe transmitter is working?
If you're not sure if your receiver is working, remove it from your dog and take it to the fence boundary. Hold the receiver at the dog's height (not your height!), and listen for the warning beep. If the receiver beeps, everything is working fine. If you do not hear the beep, check your battery and receiver next.
Why is my Invisible Fence not working?
If you hear the warning, but no light flashes, replace the battery. If you don't have a tester, replace the battery and carry the collar past the boundary. If the problem was a dead battery, the collar should work properly when you approach the hidden boundary wire.
How do I find a break in my Invisible Fence wire?
4:437:52How to find a wire break in a underground dog or pet fence using ...YouTubeStart of suggested clipEnd of suggested clipYou will orient this so that when you go back and forth about above your wire you'll hear the staticMoreYou will orient this so that when you go back and forth about above your wire you'll hear the static. Kind of increase as you get close to the wire.
How long do Invisible Fence batteries last?
We recommend changing the battery every 3 months - it's the safest, easiest and most reliable way to guarantee your pet's safety 100% of the time. To purchase a Power Cap battery or renew your Power Cap plan online, click here. Where can I buy batteries for my Invisible Fence collar?
How do you check an Invisible Fence battery?
You can position the test light tool on the collar probe and look for the light to flash. The higher the correction level, the brighter the light will shine on the test light tool. If the collar beeps once you reach the boundary, or the test light illuminates, the battery and the collar work.
Does Invisible Fence beep before shock?
An underground wire is installed around your yard (or other designated area), which emits a signal that is picked up by a collar worn by your dog. As your dog approaches the boundary line, the collar gives a warning beep, followed by a shock if he continues to move closer.
Why is my pet safe transmitter beeping?
If an alert is occuring on your base unit, your pet is no longer contained. Secure your pet and remove his collar before proceeding.
Does Invisible Fence collar beep before shock?
The invisible fence flags mark the inside edge of the shock area, in which the dog receives the beeps and shocks. As your dog gets near the edge of the yard, he will pass the flags and then hear a series of beeps from his collar before getting a shock.
Why is my electric dog collar not working?
Make sure your battery is charged in both the collar and the transmitter. Low battery charge can make for inconsistent functioning. Make sure both pieces are turned on and that the unit is properly synced so that the collar is receiving a signal from the transmitter.
How do I sync my petsafe wireless collar?
Press the button on an angle to see the upper half of the button while holding. Press and hold the upper left button on the remote to pair the collar. The collar will flash five times and then begin beeping to confirm it is paired. Release the button and test to confirm it is properly paired.
How do you check an Invisible Fence battery?
You can position the test light tool on the collar probe and look for the light to flash. The higher the correction level, the brighter the light will shine on the test light tool. If the collar beeps once you reach the boundary, or the test light illuminates, the battery and the collar work.
How do I make my Invisible Fence stop beeping?
You can order replacement batteries online, from your local dealer, or by calling 1-800-824-3647. Why is my Invisible Fence control panel beeping? If your Invisible Fence control panel is beeping every second, the most likely issue is that you have a wire break somewhere on your property.
How Do You Reset an Invisible Fence Transmitter?
Resetting the transmitter may be as simple as popping the batteries out and then back in once again.
How to fix a transmitter that isn't working?
There may come a time where the transmitter isn’t working quite the way that it should. When this is the case, resetting the transmitter could be a great way to get it working once again. Resetting the transmitter may be as simple as popping the batteries out and then back in once again .
How Long Do Invisible Fence Collars Last?
On one set of batteries, you can expect to get somewhere in the neighborhood of 3-4 months depending on the quality of the battery.
Why isn't my invisible fence collar working?
Why Your Collar May Not Be Working Properly. The purpose of the invisible fence collar is to provide a reasonable shock to the collar of your pet. This is to alert them that they are at their allowable perimeter. But from time to time, the collar may not provide the proper level of shock. When this happens, there are quite a few things ...
What to do if shock level doesn't change?
If the shock level doesn’t change after you’ve made the corrections, it could be one of the other aforementioned issues. Getting those issues fixed may require returning the unit to the manufacturer.
