F irst, you have to go through the factory reset steps that the Particle team suggests (see this link ):
- Begin holding the MODE button down.
- While holding the MODE button down, tap the RESET button briefly.
- After 3 seconds the core will begin blinking yellow, KEEP HOLDING the MODE button.
- After 10 seconds the core will begin blinking white. When this happens...
- Begin holding the MODE button down.
- While holding the MODE button down, tap the RESET button briefly.
- After 3 seconds the core will begin blinking yellow, KEEP HOLDING the MODE button.
- After 10 seconds the core will begin blinking white.
How do I set up argon?
The easiest way to set up Argon is using mobile phone (Andriod or iOS) and a connection to the internet. Here, I am using Andriod phone. 1.Plug Argon with USB of your computer make sure blue led will blink (Listening mode). When Argon is in Listening Mode, it is waiting for you to configure your mesh network.
How do I run code on my particle device?
Click the lightning bolt icon on the top left of your screen to flash your code to your device. As soon as you click, the Particle Device cloud will compile the program source code to a binary file and send it over-the-air (OTA) to your Argon. For more hardware examples to try, visit the hardware examples.
What is the particle argon?
The Particle Argon is a development kit with Wi-Fi and Bluetooth radios for building connected projects and products. To set up your Argon, you'll need an Android or iOS mobile phone and a connection to the internet. 1. Set up your Argon
How do I factory reset particle photon?
Resetting settings Put the Photon in DFU mode (blinking yellow), by pressing RESET and SETUP, releasing RESET and continuing to hold down SETUP while it blinks magenta until it blinks yellow, then release.
How do you reset a photon board?
Hold down RESET and SETUP, release RESET and continue to hold down SETUP until the device blinks magenta, then release SETUP. The device will then go through the normal sequence of colors: blinking green, blinking cyan, fast blinking cyan, then breathing magenta.
How do you set up particle argon?
Set up your Argon. For a short (~4 min) overview of what the Argon setup process looks like, watch the video below.Open the Web IDE. To program your Argon, open a new browser tab and go to the Web IDE. ... Load the Blink example. Click on Blink an LED on the left side of the page. ... Target your device. ... Compile your code & flash.
How do you reset particle boron?
Boron FW restorepower-up device.press/hold MODE 10+sec till rapid blue flashing.relese MODE.press/hold MODE.tap RESET.wait for magenta -> yellow -> white - > rapid white flashing.release MODE.“add” (althought it's already there) device to your account via mobile app.
How do you flash particle photon?
Connect Your PhotonStep 1: Power On Your Device. Plug the USB cable into your power source. ... Step 2a: Connect your Photon to the Internet using the setup web application. Go to setup.particle.io. ... Step 2b: Connect your Photon to the Internet using your smartphone. Open the app on your phone. ... Step 3: Blink an LED!
Where is the MAC address on a particle argon?
How to get a Particle Photon MAC Address before connecting it to a WiFi networkConnect your Photon to your computer's USB port.Download putty.Open Device Manager and find out what COM port your Photon is connected to. Mine is on COM4.Open putty. ... Enter “m” and you should see your MAC address.
How do you update particle argon?
0:498:24Upgrading firmware Device OS on Particle Argon and Xenon - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt will automatically upgrade.MoreIt will automatically upgrade.
How do you power the particle argon?
The USB port is the easiest way to power up the Argon. Please make sure that the USB port is able to provide at least 500mA. Power from the USB is regulated down to 3.3V by the on board Torex XC9258A step-down regulator. The pin is internally connected to the VBUS of the USB port.
How do I connect my Argon to WiFi?
Follow the App's InstructionsSkip the Mesh network.Choose CMU-DEVICE as the network.The Argon should reboot and connect to WiFi (breathing blue). Wait until it's connected.When your Argon connects to the Particle cloud, it'll link your account with the device.Finally choose a memorable name for your device.
How do you flash particle boron?
To target the Boron, click the star near the name of the device. Finally, to flash the code to the Particle Boron, click the Flash button in the upper-left corner of the screen; it looks light a lightning bolt.
How is Boron particle set up?
The Particle Boron is a cellular and Bluetooth development kit designed for building connected projects and products. To set up the device you'll need an Android or iOS mobile phone and a connection to the internet....Set up your Boron. ... Open the Web IDE. ... Load the Blink example. ... Target your device. ... Compile your code & flash.
How do I change the wifi on my particle photon?
1:563:39Connect Particle Photon to wifi - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it says to hold down set up on your photon for three seconds set up is to the left of yourMoreAnd it says to hold down set up on your photon for three seconds set up is to the left of your status light so let's hold that down until you get a blue blinking. Light.
Introduction
The Particle Argon, Boron, and Xenon are Particle IoT dev boards with mesh networking. All the boards are all built around the Nordic nRF52840 SoC and include an ARM Cortex-M4F with 1MB of Flash and 256k of RAM. This chip supports Bluetooth 5 and NFC.
How to setup Argon
There are many ways to set up Particle devices. The easiest way to set up Argon is using mobile phone (Andriod or iOS) and a connection to the internet. Here, I am using Andriod phone.
Webpage
As we have device id and access token now we can proceed to html file. Open notepad, write code in that and save it as an.html file. Replace your device ID with your actual device ID and your access token with your actual access token.