To reset Brother HL-L2300D, HL-L2320D, and HL-L2321D Drum Counter. (1) Make sure that the front cover is open. (2) Press and hold the Go Button for about four seconds until all of the LEDs light up. Once all four LEDs are lit, release Go Button. (3) Close the front cover. (4) Make sure the Drum LED is now off.
- Make sure that the machine is turned on.
- Open the front cover.
- To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go.
- Close the front cover.
- Make sure that the Drum LED is now off.
How to reset toner cartridges and drum for Brother printer hl-2321d?
How to reset toner cartridges and drum for brother printer hl-2321d 1. Open the front cover and leave open while completing the following steps. 2. Turn the printer off. 3. Hold the 'go' button while turning the printer on. All panel lights should be on. 4. Release the 'go' button. 5. Press the 'go' ...
How do I reset the drum on my brother laser printer?
Press the Up arrow key to display Reset and reset the drum counter. Close the front cover. Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations.
How do you put a toner cartridge in a brother dryer?
Unpack the new drum unit and put the toner cartridge firmly into the new drum unit until you hear it lock into place. If you put the cartridge in correctly, the lock lever on the drum unit will lift automatically. Install the drum unit and toner cartridge assembly back into the machine.
How do I reset the drum on my Kenmore washing machine?
The option is only available when machine has the 'Replace Drum' or 'Drum Stop' message. 3. Press the UP OR DOWN ARROW key to select Drum Unit. Press OK. 4. Press the UP ARROW key to reset the drum unit counter. 5. The display will show 'Accepted' and the machine will return to 'Ready'.
What to do if Brother error message still appears?
When to reset drum counter?
Does Brother printer use drums?
About this website
How do you reset the drum counter on a Brother HL 2320d?
How to reset the drum counter:Open the front cover.Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.Close the front cover.The Drum LED should now be off.
How do you reset the drum on a Brother printer HL?
How to Reset Drum on Brother HL-L2370dwMake sure the printer is on.Close the front cover.Hold down the “OK” button and the “up” arrow at the same time.Press the “OK” button to select “Drum”.Select the “down” button to reset the drum counter.The printer will say accepted when drum is reset.More items...
How do you reset the drum light on a Brother HL L2300D?
0:000:30How to Manual Reset DR630 Drum Error on Brother HL-L2300D, HL ...YouTubeStart of suggested clipEnd of suggested clipPresent hold the Go button for four seconds. All LED lights will light up release the gold buttonMorePresent hold the Go button for four seconds. All LED lights will light up release the gold button close the front cover and your printer should be ready to print.
Why is the drum light flashing on my Brother printer?
The Drum LED flashes if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one. The Drum LED continues to flash if the drum counter was not reset when you installed a new drum unit.
How do I get rid of the Replace drum message on my Brother printer?
I still receive the error message "Replace Drum", or "Drum End Soon" after I replace the drum unit with a new one.Make sure that the machine is turned on.Open the front cover.Press and hold OK for 2 seconds.Press the Up arrow key or 1 to reset the drum counter.Close the front cover.
Why does my printer keep saying replace drum?
The message 'Replace Drum' will appear if the drum unit is at the end of its rated life. Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges.
How do you reset the drum life on a Brother HL l2340dw?
FAQs & TroubleshootingMake sure that the machine is turned on.Open the front cover.Press and hold OK for about two seconds to display Drum Unit, and then press OK.Press the Up arrow key to display Reset and reset the drum counter.Close the front cover.
How do I reset my brother hl 2140 drum unit?
Brother HL-2140 - Reset Drum Simply open the front cover, and hold the “GO” button until all four LED's are lit. Release the “GO” button and close the front cover.
How do you reset the drum on a Brother HL 2240d?
How to reset the drum counter:Make sure the machine is on, then open the front cover.Press and hold the "Go" button for about 4 seconds or until all the LEDs light up.Release the "Go" button and close the front cover.If the drum light is off, the drum unit is reset.
Do I really need to replace the drum on my Brother printer?
The Brother machine will display a 'Replace Drum' or 'Drum Stop' message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.
What happens if I don't replace printer drum?
Without a drum unit, the toner powder in the cartridge cannot be transferred onto the page. The two parts work together to create a print! You can't have one without the other and expect the printer to work properly.
How do I reset my Brother printer?
[Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.].
How do I reset my brother hl 2250dn printer?
Brother HL-2250 - Factory ResetTurn off the printer.Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.Release GO, all the LEDs will turn off.Press GO ten (10) times. The printer will automatically restart.
How do you reset the drum on a Brother HL L2350DW?
Once the new drum is replaced, you will need to reset the drum counter on the Brother HL-L2350DW:Make sure the machine is on.Close up the front cover.Hold down the “OK” button and the “up” arrow at the same time.Press the “OK” button to select “Drum”.Select the “down” button to reset the drum counter.
How do you reset the drum on a Brother HL 2280DW?
DCP-7060D, DCP-7065, HL-2280DW,Turn on the printer and replace the drum. Keep the front door open.Press the Clear button.Press the Arrow Up button.When the screen says Accepted, close the front door.The drum unit is reset.
How do you reset the drum on a Brother HL L3270CDW?
Reset the Drum Counter (HL-L3270CDW) Press and hold for about five seconds. Press [Drum]. Select the toner color for the drum unit you just replaced. Press [Yes].
FAQs & Troubleshooting | HL-L2320D | United States | Brother
Below are examples of LED indications. Click on the image that matches the LED indication shown on your machine to see possible solutions.
What to do if Brother error message still appears?
If the error message still continues to appear, contact Brother Customer Service from "Contact Us".
When to reset drum counter?
Reset the drum counter only when you replace the drum unit. If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately. Make sure that the machine is turned on. Open the front cover.
Does Brother printer use drums?
Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations. Each individual component is designed to work with the other to ensure quality and reliability. Using non-Brother supplies may affect the hardware performance, print quality and machine reliability. The Brother limited warranty does not apply to any problem that is caused by the use of unauthorized third party drum units, toner cartridges or toner.
How to take toner out of drum?
Push down the lock lever and take the toner cartridge out of the drum unit.
Does Brother printer have toner cartridges?
The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge.
How to take toner out of drum?
Push down the green lock lever and take the toner cartridge out of the drum unit.
How to get a drum mark off?
Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.
What to do if Brother error message still appears?
If the error message still continues to appear, contact Brother Customer Service from "Contact Us".
How to reset drum counter?
Press the Up arrow key to display Reset and reset the drum counter.
Does Brother warranty cover toner cartridges?
The Brother limited warranty does not apply to any problem that is caused by the use of unauthorized third party drum units, toner cartridges or toner. For more information on other error messages, click here. If the error message still continues to appear, contact Brother Customer Service from "Contact Us".
What to do if Brother error message still appears?
If the error message still continues to appear, contact Brother Customer Service from "Contact Us".
When to reset drum counter?
Reset the drum counter only when you replace the drum unit. If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately. Make sure that the machine is turned on. Open the front cover.
Does Brother printer use drums?
Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations. Each individual component is designed to work with the other to ensure quality and reliability. Using non-Brother supplies may affect the hardware performance, print quality and machine reliability. The Brother limited warranty does not apply to any problem that is caused by the use of unauthorized third party drum units, toner cartridges or toner.
