Oil Change Light Reset Dodge Avenger 2008 2009 2010 2011 2012 2013 2014 Procedure
- Turn the ignition to the “RUN” position.
- Immediately press and release the accelerator pedal 3 times within 10 seconds.
- Turn the ignition off.
- Without your foot on the brake pedal, press ENGINE START/STOP button to cycle vehicle to ON/RUN mode (make sure engine is OFF)
- Fully depress and release the accelerator pedal 3 times within 10 seconds.
- Turn the key to the OFF position and then back on to confirm reset was accepted.
How to reset the oil change required message indicator on Dodge Avenger?
Quick and simple steps on how to reset the oil change required message indicator light on Dodge Avenger from the year 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014. Turn the ignition On. Don’t start the engine. Fully press the accelerator pedal 3x within 5 seconds. Then turn the ignition off. Start the engine to verify the oil reset is successful.
How do you reset the oil in a Ford Explorer?
Fully press the accelerator pedal 3x within 5 seconds. Then turn the ignition off. Start the engine to verify the oil reset is successful. If the OIL CHANGE REQUIRED still appears on the dashboard, repeat the procedure. NOTE: RESET ONLY THE OIL CHANGE REMINDER AFTER THE OIL CHANGE.
How do you reset the oil in a Honda Accord?
Turn the ignition On. Don’t start the engine. Fully press the accelerator pedal 3x within 5 seconds. Then turn the ignition off. Start the engine to verify the oil reset is successful. If the OIL CHANGE REQUIRED still appears on the dashboard, repeat the procedure.
How do I reset the oil in my Toyota Corolla?
Turn the ignition On. Don’t start the engine. Fully press the accelerator pedal 3x within 5 seconds. Then turn the ignition off. Start the engine to verify the oil reset is successful. If the OIL CHANGE REQUIRED still appears on the dashboard, repeat the procedure. NOTE: RESET ONLY THE OIL CHANGE REMINDER AFTER THE OIL CHANGE.
How do you reset the oil light on a Dodge Avenger?
3:564:47Dodge Avenger oil change and oil light reset, easy one - YouTubeYouTubeStart of suggested clipEnd of suggested clipThree times within 10 seconds so we got to make sure we can count properly and do that. And thenMoreThree times within 10 seconds so we got to make sure we can count properly and do that. And then what we're going to do is just turn the ignition switch to the lock position and that should do it.
How do you reset the oil change light on a 2012 Dodge Avenger?
0:041:00How to Reset the Oil Change Required Reminder on a Dodge ...YouTubeStart of suggested clipEnd of suggested clipTurn the key to the on position. And hit the gas pedal three times to the floor. So I'm going toMoreTurn the key to the on position. And hit the gas pedal three times to the floor. So I'm going to turn the key back on now and hit the gas put a one-two. Three times to the floor.
How do you reset the change oil light on a 2014 Dodge Avenger?
0:471:202014 Dodge Avenger I Change Oil Message - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the ignition switch to the on position. But don't start the engine now fully depress theMoreTurn the ignition switch to the on position. But don't start the engine now fully depress the accelerator pedal slowly three times within 10 seconds.
How do I reset my oil change required?
Oil Change Indicator ResetSwitch the ignition on. ... Fully press the accelerator and brake pedals at the same time.Keep the accelerator and brake pedals fully pressed.After three seconds, a message displays confirming the reset procedure is in progress.More items...
How much oil does a 2013 Dodge Avenger take?
4.5 quartsEngine Oil Capacity: With filter 4.5 quarts. After refill check oil level.
Why is my check engine light on in my Dodge Avenger?
The most common reasons a Dodge Avenger has a check engine light are an emissions system component, a sensor, or a catalytic converter.
How do you change the time on a 2014 Dodge Avenger?
0:010:41HOW TO SET THE CLOCK ON DODGE AVENGER ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt press and hold it starts blinking adjust it six and then you press this to select it.MoreIt press and hold it starts blinking adjust it six and then you press this to select it.
What type of oil do I need for a 2014 Dodge Avenger?
Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.
What kind of oil does a 2012 Dodge Avenger take?
Mobil 1 - Advanced Full Synthetic 5W-20 Motor Oil, 5 Quart (Part No. 14991)
Why is my oil light still on after oil change?
If your oil light stays on even after changing your engine oil, you're going to want to check the sensor first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues.
Why is my change oil light on when I just changed my oil?
The oil pressure light on after oil change is a serious problem. It means that there is no oil flowing inside the engine parts. If you keep running the car in this condition, the whole engine could be damaged. So, when the light is on, tow it to a mechanic to find out the problem and fix it.
Why is my maintenance light on after oil change?
Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it's time for a new oil change, so you don't have to count the miles manually.
What kind of oil does a 2012 Dodge Avenger take?
Mobil 1 - Advanced Full Synthetic 5W-20 Motor Oil, 5 Quart (Part No. 14991)
How much oil does a 2012 Avenger take?
Engine Oil Capacity: With filter 4.5 quarts. After refill check oil level.
Where is the oil pressure sensor on a 2008 Dodge Avenger?
0:426:20Dodge Avenger Oil Pressure Sensor Location & Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe oil pressure sensor is gonna be located right down here see this green connector right here.MoreThe oil pressure sensor is gonna be located right down here see this green connector right here.
What engine does the Dodge Avenger use?from erwinsalarda.com
According to some reports, the Avenger, along with the redesigned Chrysler Sebring, shares a DaimlerChrysler/Mitsubishi Motors platform called JS which used the Mitsubishi GS as a starting point. The base engine in the SE and SXT trim levels was the 2.4 L GEMA I4 naturally aspirated “World Engine”, a joint venture between DaimlerChrysler, Mitsubishi, and Hyundai. Additional engines included an optional 2.7 L V6 in the SXT and a standard 3.5 L V6 in the R/T trim level. In addition to the 2.4 L “World Engine” and the V6s, export vehicles were offered with the 2.0 L naturally aspirated “World Engine”, as well as a 2.0 L turbocharged diesel (Pumpe-Düse) made by Volkswagen. As a 2008 model, the Dodge Avenger came to showrooms in February 2007.
How many miles does the oil change light on a Dodge Avenger take?from hiride.com
The Oil Change or Oil Change Required light will illuminate on the Dodge Avenger after 5,000 miles have been traveled. You can clear and reset the light with these steps.
What is the Dodge Avenger?from erwinsalarda.com
About Dodge Avenger. The Dodge Avenger is a front-wheel drive, mid-sized sedan that was marketed by Dodge. The Avenger made its North American debut in 1994 as a two-door coupe that was produced until 2000.
What cars did the Avenger compete with?from erwinsalarda.com
The Avenger competed directly with the Chevrolet Malibu and Ford Fusion, with the 2007 and later Chrysler Sebring being aimed at the higher-priced American cars such as the Mercury Milan, Pontiac G6, and Saturn Aura. (source:wiki)
When was the Avenger released?from erwinsalarda.com
The Avenger was officially unveiled at the Paris Motor Show on September 28, 2006, as a concept car. It was launched in Europe and was sold in the United Kingdom, filling a gap in the Chrysler range that was left by the Neon’s demise four years earlier.
Can you add videos to your watch history?from seventrumpet.com
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
What engine does the Dodge Avenger use?from erwinsalarda.com
According to some reports, the Avenger, along with the redesigned Chrysler Sebring, shares a DaimlerChrysler/Mitsubishi Motors platform called JS which used the Mitsubishi GS as a starting point. The base engine in the SE and SXT trim levels was the 2.4 L GEMA I4 naturally aspirated “World Engine”, a joint venture between DaimlerChrysler, Mitsubishi, and Hyundai. Additional engines included an optional 2.7 L V6 in the SXT and a standard 3.5 L V6 in the R/T trim level. In addition to the 2.4 L “World Engine” and the V6s, export vehicles were offered with the 2.0 L naturally aspirated “World Engine”, as well as a 2.0 L turbocharged diesel (Pumpe-Düse) made by Volkswagen. As a 2008 model, the Dodge Avenger came to showrooms in February 2007.
What is the Dodge Avenger?from erwinsalarda.com
About Dodge Avenger. The Dodge Avenger is a front-wheel drive, mid-sized sedan that was marketed by Dodge. The Avenger made its North American debut in 1994 as a two-door coupe that was produced until 2000.
What cars did the Avenger compete with?from erwinsalarda.com
The Avenger competed directly with the Chevrolet Malibu and Ford Fusion, with the 2007 and later Chrysler Sebring being aimed at the higher-priced American cars such as the Mercury Milan, Pontiac G6, and Saturn Aura. (source:wiki)
How to cycle a car without brake pedal?from carhowto.com
Without your foot on the brake pedal, press ENGINE START/STOP button to cycle vehicle to ON/RUN mode (make sure engine is OFF)
When was the Avenger released?from erwinsalarda.com
The Avenger was officially unveiled at the Paris Motor Show on September 28, 2006, as a concept car. It was launched in Europe and was sold in the United Kingdom, filling a gap in the Chrysler range that was left by the Neon’s demise four years earlier.
Oil Viscosity and Capacity
The 2.4 liter engine holds approximately 4.5 quarts (4.3 liters) of 5W-20 oil when the engine oil and filter are changed.
Not Working?
If the oil change light reset procedure is not working to reset your oil life monitor, make sure you are following each of the steps exactly and in the order displayed in the Oil Change Light Reset Dodge Avenger 2008 2009 2010 2011 2012 2013 2014 procedure above.
Oil Life Monitor Reset Procedure Frequently Asked Questions
If you are still having trouble with visit the Oil Life Monitor Reset Procedure Frequently Asked Questions (FAQ) page for more information.
What engine does the Dodge Avenger use?from erwinsalarda.com
According to some reports, the Avenger, along with the redesigned Chrysler Sebring, shares a DaimlerChrysler/Mitsubishi Motors platform called JS which used the Mitsubishi GS as a starting point. The base engine in the SE and SXT trim levels was the 2.4 L GEMA I4 naturally aspirated “World Engine”, a joint venture between DaimlerChrysler, Mitsubishi, and Hyundai. Additional engines included an optional 2.7 L V6 in the SXT and a standard 3.5 L V6 in the R/T trim level. In addition to the 2.4 L “World Engine” and the V6s, export vehicles were offered with the 2.0 L naturally aspirated “World Engine”, as well as a 2.0 L turbocharged diesel (Pumpe-Düse) made by Volkswagen. As a 2008 model, the Dodge Avenger came to showrooms in February 2007.
What is the Dodge Avenger?from erwinsalarda.com
About Dodge Avenger. The Dodge Avenger is a front-wheel drive, mid-sized sedan that was marketed by Dodge. The Avenger made its North American debut in 1994 as a two-door coupe that was produced until 2000.
What cars did the Avenger compete with?from erwinsalarda.com
The Avenger competed directly with the Chevrolet Malibu and Ford Fusion, with the 2007 and later Chrysler Sebring being aimed at the higher-priced American cars such as the Mercury Milan, Pontiac G6, and Saturn Aura. (source:wiki)
How to cycle a car without brake pedal?from carhowto.com
Without your foot on the brake pedal, press ENGINE START/STOP button to cycle vehicle to ON/RUN mode (make sure engine is OFF)
When was the Avenger released?from erwinsalarda.com
The Avenger was officially unveiled at the Paris Motor Show on September 28, 2006, as a concept car. It was launched in Europe and was sold in the United Kingdom, filling a gap in the Chrysler range that was left by the Neon’s demise four years earlier.