How to Restring a Hunter Douglas Duette Cellular Honeycomb Shade
- Step 1. – Measure the length and width of the shade, and cut the strings you’ll need for this repair.
- Step 2. – Loosen the Phillips screws on the brackets behind the shades two full turns.
- Step 3. – Remove the shade from your window, and lay it on a flat surface. The shade will pull out towards you when removing.
- Step 8. – Use pliers to pull the string in the bottom rail pocket and ferrule out of the shade. ...
- Step 9. – Pull the old strings out of the shade and discard them.
- Step 10. – Thread the new string through the eye of the restring needle. Starting at the bottom rail, push the needle up through the fabric.
- Step 11. – Thread the end of the string through the ferrule, leaving about an inch of string to tie it off.
- Step 12. – Pull the string through to seat the ferrule into the pocket in the bottom rail. Repeat these steps for all other lift strings.
- Step 14. – Slide the top rail on to the shade fabric. Be careful not to snag the fabric. Step 15 – Replace the headrail end cap.
- Step 20. – With the shade all the way up, cut the strings a few inches below where the shade should stop when lowered.
- Step 21. – Install the condenser, tassel and pull cord.
Full Answer
Can You restring a Hunter Douglas top down bottom up shade?
You can simply follow these directions to restring a Hunter Douglas Top Down Bottom Up Shade to get your shade operating as good as new! Kids can strangle in blind cords. To make your blinds safer for kids, keep cords out of reach and secure cord and bead chain loops. To learn more, please visit our child safety guide.
What is included in the Hunter Douglas restringing kit?
Moreover, the restringing kit includes restring instructions, 100 feet of 0.9mm lift cord, and the restring tool as well as string guides and cord condensers for Hunter Douglas Duette and Applause shades. The cord and restring tool can be used on other brands with the guides will only fit Hunter Douglas shades.
How do you remove Hunter Douglas window shades?
Step 1 – Remove the shade from the window. Loosen the screws on the Hunter Douglas brackets two full turns. Do not remove the screws. The shade will come out towards you. Lay it on a flat surface, and compress the shade with rubber bands. Step 2 – Remove the condensers and tassels, and set them aside.
How to restring Cordless cellular shades?
This forms the final step to restring the cordless cellular shades. It involves securing the end caps, both the top and the bottom rail, to ensure that the shades are effectively functional with the new attached strings. You must ensure that you have placed the strings inside the cord stop and that they are closed.
How to fix a damaged guide?
If the guides are damaged on one side, replace them or rotate them 180 degrees.
Does shade pull out when you remove it?
The shade will pull out towards you when removing.
Can kids strangle cords in blinds?
Kids can strangle in blind cords. To make your blinds safer for kids, keep cords out of reach and secure cord and bead chain loops. To learn more, please visit our child safety guide.
How many turns does it take to loosen a Hunter Douglas bracket?
Loosen the screws on the Hunter Douglas brackets two full turns. Do not remove the screws.
Where is the front tab of a shade bracket?
Make sure the front tab of the bracket is seated into the slot at the front of the headrail. Then push the shade back until seated.
What color string is used for a blind?
Please remember that it is always better to have more string than less for any blind repair. This instructional video uses two different color strings. The green string shows the top down operation of the blind, and the white string shows the bottom up operation of the blind.
What side of the knot should the tapered side be?
Make sure the tapered side is up above the knot when attaching.
Where are the strings tied off in the old style?
The old style, on the left, the strings are tied off inside the rails. Begin at step 22 for these instructions.
Do you have to purchase new shades when the strings break?
Your blinds strings may become damaged, or you may have to change out different components in your top down bottom up shade for multiple reasons. You do not always have to purchase a new shade when the strings break.
Can kids strangle cords in blinds?
Kids can strangle in blind cords. To make your blinds safer for kids, keep cords out of reach and secure cord and bead chain loops. To learn more, please visit our child safety guide.
Why is it important to restring cellular shades?
Introduction. It is important to know how to restring cellular shades due to wear and tear from house pets, small children, and accidental damage. This guide outlines an easy repair for broken or worn strings that can be done at home instead of completely replacing the shade.
Where to untie strings in a shade?
Untie the ends of the strings between the weights on the bottom of the shade.
How to cut strings in a shade?
Open the shade and cut the strings so the ends are halfway up the shade.
How to take end caps off of top rail?
Use the flathead screwdriver to take the end caps off of the top rail and set aside.
How to remove cord stop from guitar?
Using a flathead screwdriver, open the cord stop, remove from the strings, and set aside.
How to restring cellular shades?
You will need to remove the cellular shades from the window and bed them. Carefully remove the cord lock at the top of the headrail or the inside and slide the rails while determining the length of the string. Insert the new string taking into consideration the length of the removed string and re-insert the rails. You will then put the caps back on and test the functionality of the new strings . Quite amazing! Right?
How to fix cellular shade that won't go up?
For instance, if your cellular shade won’t go up, begin by gently lowering the shade to the lowest it can go. If it is already at the lowest end, pull it towards you at an angle of 45 -degrees. By doing so, the cord system inside your cellular shade will start to operate as new as it shall have been activated. If you do not realize the activation in the first process, repeat the same process a few more times, as this will perfectly fix the cellular shades that have been de-activated.
What is cordless shade?
Cordless cellular shades offer the user an effortless means of regulating their lighting needs and providing better privacy. These units are not only best with regards to workability but also in appearance. The innovative layout gives an elegant look to your home décor.
What is the function of fiction clips in cordless blinds?
The fiction clips play a significant role in your cellular shades as they help the window blinds recoil.
Why are cordless shades better than regular shades?
Again, cordless shades are considered a better choice because they entail an option that allows you to set a timer for the blinds to shut off in the morning. That’s helpful because it aids in preventing one from been reflected with bright light directly on the face every time you wake up. The convenience that cordless blinds provide means that you can bid goodbye to all your worries and doubts.
What is cordless cellular blinds?
Cordless cellular shades is a popular name in the field of window covering and are illustriously known to offer an innovative design with a sleek look to match numerous styles of your home décor. If you are drooling for blinds that, besides excellent insulation, also offer better privacy, then cordless cellular shades might be the perfect solution. These units integrate the sense of rich fabric cells that can confine air exactly when offering improved insulation. The cellular shades come in handy when privacy is needed as they incorporate multiple layers that obviate light, meaning it is strenuous to see through these blinds from outside.
Why won't my cordless blinds go up?
You may fret when your cordless blinds won’t go up. Often, the inner springs of your cellular shade may be inactivated when you keep them closed or opened for a long time. However, this does not mean the string is broken, as most individuals always rush to seek an effective way on how to fix cordless blinds broken string. The practice only requires you to re-activate the inner springs.
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Product description
Restring KIT for window shades like: Honeycomb, Cellular, Pleated, Roman shade. KIT includes: 1/ 0.9mm cord spool 2/ 8 cord guides (4 for 3/4" cell size, 4 for 3/8" cell size).
What other items do customers buy after viewing this item?
Pages with related products. See and discover other items: Explore cords for shades
How to restring a Duette shade?
Finish the restringing process by pulling the replacement string through the pulling mechanism on the side of the blinds. Pull the new replacement string through the cord channel to the cord lock. After the cord lock, install the end cap to finish the restringing of your shades. Note that the cord pulling mechanism on the side is different depending on the Duette shade model, so make sure to follow any specific instruction regarding the shape and position of the cord lock and cord channel.
How to replace a string in a shade cell?
Put a needle with the replacement string threaded through it inside the small hole at the top of the cord guide. Carefully pull the needle all the way through the cord guide and the whole stack of shade cells. Do the same for every other hole as well.
How to remove Duette shade rails?
Remove the rails by sliding them off the Duette shade fabric. Slide in the opposite direction of the cord lock on the side of the shades. Then remove the cord and the cord washers from the shades. As this point, you will have only a thick-stacked assembly of fabric cells, with just the cord guide at the top. Advertisement.
What is a duette shade?
Scissors. Duette shades are a trademark of the Hunter Douglas Company and one of the most common brands of honeycomb shades. Honeycomb shades are also known as cellular blinds, as they have individual horizontal cells, which resemble a honeycomb shape when observed from the side.
How to measure for new cord for shade?
Measure the needed length of the new cord, using the height of the Duette as a guideline. Remember that the length of the new cord has to be double the shade's height plus its width.
Can you remove aluminum filler from cell?
Never remove the aluminum or plastic filler strips from the cells.