how do you resurface a kitchen table

How To Refinish A Kitchen Table

• 1. Take the table apart This was actually one of the most difficult parts because our tabletop is dang heavy! ...
• 2. Sand using 120 grit paper This was the most satisfying part! ...
• 3. Wipe the table with tack cloth After we got the original finish off, we wiped the whole table down with the tack cloth. ...
• 4. Apply the stain ...
• 5. Apply the finish ...

Full Answer

How to refinish a kitchen table?

Here’s what you’ll need:

• All-purpose cleaning spray and a cloth or paper towels
• 60-, 120-, and 360-grit sandpaper
• A block sander or an orbit sander
• A clean, dry tack cloth
• Stain (or primer and paint)
• Paint and varnish remover (stripper)
• Putty knife
• Paintbrush

How to redo a butcher block kitchen table?

Restoring a Butcher-Block Countertop

1. Bleach Mildew Stains. Stir a teaspoon of powdered oxygen bleach (sodium percarbonate) into a cup of hot water until it dissolves.
2. Sand Burn Marks, Knife Cuts. Use a coarse, 60-grit sandpaper or sanding sponge to abrade the discolored wood, but don’t try to get rid of it entirely: Sanding ...
3. Dissolve Wine Stains. ...
4. Sand. ...
5. Fill Cracks. ...
6. Seal. ...
7. Safe Finishes. ...

How do you refinish a wood kitchen table?

To refinish a wood table, start by coating the table in stripper, waiting 15-20 minutes, and using a plastic scraper to take the paint or varnish off. When you’re done stripping the table, sand the surface in the direction of the grain to even out any discoloration or irregularities. Then, apply the new finish by applying a coat of stain.

How to clean butcher block kitchen tables?

Stain removal.

• Lemon. The most organic approach is table salt and lemon. ...
• Baking soda. Cover the stain with baking soda and work it into the board using some elbow grease. ...
• Bleach. As a last resort, mix equal parts water and bleach and apply to the block using a sponge or rag. ...
• Scrape. ...
• Sanding. ...

How do you resurface a wood table top?

Clean the Surface. Use gentle soap and water to remove dirt and oils from the table's existing finish. ... Apply Stripper. If the table is painted or varnished, you'll need to strip the surface. ... Clean With Mineral Spirits. ... Sand Table Surface. ... Apply Stain. ... Apply Finish.

How can I make my old kitchen table look better?

7 Ways to Refresh the Look of an Existing (Old/Boring/Not You) Dining TableRefinish the finish. You'd be surprised what a new finish on an old dining table can do. ... Distract with chairs. ... Forget chairs. ... Table cloth. ... Amazing light fixture. ... Set it. ... Replace the base.

What kind of paint do you use to refinish a kitchen table?

When it's time to paint, make sure to select a high-quality water-based enamel paint, which will give you a hard finish that's similar to an oil paint. Kitchen tables take a beating, and you'll need a paint that can withstand plates, cups and all sorts of other objects banging it every single day.

Can you just refinish the top of a table?

Depending on the table top and finish you're working with, you could get away with lightly sanding or repainting it to give it a new look. To refinish a table top considerably worn by time, you likely need to strip the clear varnish top coat since varnish tends to get yellowed or irreparably cloudy.

How do you make an old wooden dining table look new?

Starting with the roughest sandpaper (60-grit), sand in the direction of the grain. You can sand by hand, but a mechanical sander makes the job go, ahem, much smoother. Finish by wiping down the table with a tack cloth so it's free of dust, then sand the surface again, this time with your 120-grit, to polish the wood.

How much does it cost to refinish a table top?

Cost to Refinish a Table. A basic table costs $150 to $600 to refinish. The process is typically the same regardless of condition, and price changes only based on size. For any wooden table, the process involves stripping the old finish and applying a new final coat.

Can I paint a table without sanding?

Chalk paint is the best way to paint practically anything without sanding. It offers a gorgeous matte finish and no need to prepare the surface. Annie Sloan's Chalk Paint was the cornerstone of the painted furniture industry as we know it.

What is the best finish for a dining room table?

Varnish and oil-based poly finishes are the most durable. Tung oil and linseed oil are relatively durable. In general, it's best to stay away from shellac. Lacquer can be tough, but it tends to take on a yellow color as time goes by.

Can I spray paint my kitchen table?

Once your piece of furniture is clean and dry, you can begin painting. Make sure to read the directions on the can of spray paint. Most require that you shake for at least a minute before using. Don't skip this step!

How can I refinish my table top without stripping it?

The key to re-staining a wood dining table top without having to strip off the original factory finish is to create a soft, faux wood grain appearance with gel stain. Followed by several coats of a durable clear sealer. It's actually not that hard to do. The main thing you will need, beside supplies is TIME.

How do you refinish furniture for beginners?

Just follow these steps.Clean the furniture thoroughly. If it's an older piece of furniture, there's a good chance it's built up some dust, dirt, and grime. ... Strip the wood. ... Sand it down. ... Seal the wood. ... Apply your paint or stain. ... Finish your piece.

How do you strip and refinish a table?

How to Strip & Refinish Wood FurnitureStep 1: Choose a Work Area. Work in a well-ventilated area such as your open garage or on an outdoor deck or patio. ... Step 2: Strip Away Old Finish. ... Step 3: Sand It. ... Step 4: Apply Sanding Sealer. ... Step 5: Stain It. ... Step 6: Apply Sealant.

How do you make old furniture look new?

Updating your furniture is now easy with our simple and creative ideas:#1. Strip Old Painted Finishes. ... #2. Clean Stain from Your Chairs, Dresser or Tables. ... #3. Add a Fresh Coat of Spray Paint. ... #4. Re-Cover Dining Chairs with a New Cushion. ... #5. Refinishing Furniture. ... #6. Go For Milk Paint.

How do you modernize traditional furniture?

How to Modernize a Traditional HomeMismatched furniture helps keep a space light. ... Leave some bare space to keep the look clean. ... Use color to highlight architecture. ... Use contrasting colors to create sharper lines. ... Choose one piece of art for more visual impact. ... Ditch heavy drapes for sheer or natural textiles.

What can I do with an old table?

What to Do with Your Old Kitchen TableSell it. If your old kitchen table is in good condition, you might be able to sell it on Facebook Marketplace, Craigslist, or eBay. ... Donate it. ... Refinish it. ... Think outside the kitchen. ... Recycle it. ... Call a junk hauling company.

How can I paint my dining room table without sanding?

Milk paint, which you can purchase as a powder or premixed, or even whip it up yourself at home, is a nontoxic and biodegradable paint option that's great for use on wood furniture—and if you mix it with an equal part of bonding agent, you don't need to sand the piece before beginning.

What To Consider When Refinishing Your Solid Wood Dining Table?

Before you do anything, you need to make sure you have the right equipment. The statement ‘fail to prepare, prepare to fail’ couldn’t be truer when it comes to preparing to refinish your table.

What finishes are used on solid wood tables?

There are numerous types of finishes available when it comes to solid wood tables, from wax and oil to varnish and hard wax oils, each with their pros and cons. There’s no right or wrong answer and ultimately it comes down to personal preference and what best suits your lifestyle.

What is lacquer table?

Lacquer. Lacquer is an increasingly popular finish when it comes to solid wood tables and perhaps uses the most modern technique. The word lacquer means a range of clear or coloured wood finishes that dry by a curing process. Once dry, it produces a very hard, durable finish.

Can wax be used on a pine table?

Wax is relatively soft when they’re applied to your wooden dining table, but once it’s exposed to air they start to form a protective seal over the top of your table. Wax can enhance the grain of the wood and in particular, looks great on reclaimed style pine dining tables.

Is wood oil good for tables?

However, not many people realise that this finish requires periodic reapplication for tables that are regularly used.

Does a dining table finish wear fast?

Typically if you have younger children in your family and your dining table is multi-functional and used throughout the day, your table finish could wear pretty fast, so may not be suitable.

Do you need to sand a table?

You’ll need to sand your table to remove the existing finish and as sanding releases dust and debris into the air, some finishes need to be applied in a ventilated area. You must allocate enough time to each stage of the process, to achieve maximum results.

How to clean a table top with steel wool?

Brush on liquid stripper and let it work. Use medium fine steel wool to dislodge remnants left by the paste. Work the rounded edges of the table top with steel wool to clean the surface. Work with the grain.

How to remove wet residue from a cardboard box?

File the sharp corners of a wide putty knife and gently scrape up the wet residual finish lifted by the stripper. Clean the putty knife on the edge of a small cardboard box lined with newspaper. Work with the grain.

How to remove old finish from a drywall wall?

By holding the putty knife at a shallow angle and applying moderate pressure as I move across the surface, I can remove nearly all the old finish in one pass. A small box makes a good receptacle and gives me an easy way to clean my putty knife. I'm applying the stripper to smaller sections at a time to prevent it from drying out and allowing the finish to become hard again.

How to remove old paint from a wall?

Apply a thick paste remover with a disposable nature bristle brush to a small area. Overworking stripper lessens its effectiveness, so use minimal brushstrokes. Give the gases in the chemicals time to bubble and lift the old finish.

How long does it take for a stain to dry on a table top?

Apply Matching Stain, Letting It Dry for 24 Hours. Match existing color, mixing stains if necessary and testing on scrap wood. Coat the table top with a brush or rag. Wipe off the excess with a lint-free rag and let it dry for at least 24 hours.

How to flatten clear coat?

Stir the semi-gloss clear coat thoroughly to mix the flattening agent. Apply the clear coat with a good quality natural-bristle brush to avoid dropped bristles and produce a smooth coat. Sand and clean between each coat after they dry.

How to get wax residue off steel wool?

Dip medium fine steel wool into lacquer thinner and work with the grain to wash away the wax-like residue left by the strippers.