- Remove the old upholstery from the chair
- This can be done by carefully cutting it away with a sharp knife or by unscrewing any staples or tacks holding it in place
- Clean the chair frame thoroughly to remove any dirt, dust, or debris
- Cut new fabric to fit the seat and back of the chair, allowing extra for tucking and stapling
Full Answer
How often should you replace an office chair?
How often you need to replace an office chair depends on the quality of the chair and how often you sit in it. Higher quality chairs and ergonomic office chairs can be replaced every 10 years, whereas lower quality office chairs need to be replaced every five years. Donate old chairs to local thrift stores or organizations like The Furniture ...
How do you recover an office chair?
Reupholster an Office Chair
- You Will Need. Since I’ve never reupholstered an office chair before, this was uncharted territory for me. ...
- Break the Project Into 3 Stages. I broke the project down into 3 stages: the seat, the back panel and the backrest. ...
- Stage 1: the Seat. ...
- Reuse Whatever You Can! ...
- Cut the Fabric. ...
- Sew the Ribbon. ...
- Staple. ...
- Stage 2: the Back Panel. ...
- Remove Pin Nails. ...
How to upholster an overstuffed chair?
Reupholstering My Chair: Can I Do It Myself?
- Be prepared with the right tools for the job. ...
- Purchasing a little extra fabric to reupholster your chair is like buying insurance. ...
- Tear Down: Yes, I did just say epidermis. ...
- Upholstery tear down is a dirty job, but necessary in the process of reupholstering a chair. ...
- Take lots of pictures and notes. ...
How much does it cost to recover a chair?
Cost To Reupholster A Chair. The average cost to reupholster a chair is $200 to $1,000 depending on the size, quality of fabric, and labor. Dining room chair reupholstery costs $150 to $600 per chair depending on if it has a back. The cost to reupholster a recliner or wingback chair is $600 to $1,500.
How do you reupholster an office chair seat?
1:434:23How to Reupholster an Office Chair - YouTubeYouTubeStart of suggested clipEnd of suggested clipLay out the fabric with the right side facing down and place one of the cushions on top make sureMoreLay out the fabric with the right side facing down and place one of the cushions on top make sure you have plenty of material to wrap around the back and cut out the fabric.
How hard is it to reupholster an office chair?
It's surprisingly easy to reupholster an office chair! Whether the fabric on your office chair is falling apart, or you just want to replace the boring black fabric with something brighter and more colorful, it's easy to give your chair a total makeover!
How much does it cost to reupholster an office chair?
On average, it costs between $200 to $1,000 to reupholster a chair. Upholstery fabrics cost between $30 to $60 per yard and labor charges are about $50 to $100 per hour.
Can you reupholster chair over existing fabric?
So long as the old fabric isn't darker than your new fabric, you can even upholster right over it.
Can you reupholster a chair without taking it apart?
Bear in mind that if there's only one cover on the cushion, you can recover the chair without even removing the old fabric; simply lay the new fabric over the old. When dealing with a cushion that has more than one cover, however, take off the top layer by drawing out the staples that hold it in place.
How do you cover an office chair with fabric?
0:494:17How to Revamp an Office chair - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust gonna drape it over the chair. And make sure that the top bit of the chair is covered. AllMoreJust gonna drape it over the chair. And make sure that the top bit of the chair is covered. All right so really simply what I'm going to do is I've draped it over the top bit of the chair.
Is it worth it to reupholster a chair?
High-quality furniture is always worth reupholstering because it is built to last, so if you see that the frame is solid and made of hardwood, it means it's sturdy and worth saving; whereas, low-quality furniture will have engineered wood and staples and you'd be better off buying a brand new chair.
Can I reupholster a chair myself?
Luckily, as long as the bones of the furniture are in good shape, a bit of fabric and some staples can give an outdated chair an entirely new look. Whether you're updating an old favorite or refreshing a flea market find, reupholstering a chair is a DIY project that can make a big impact.
Is it better to reupholster or buy new?
Though reupholstering can be a cost-effective alternative to buying new furniture—especially if you do it yourself—it's not always the less expensive option. More extensive repairs can cost as much as buying an entirely new piece, whereas minor repairs are usually more affordable and almost always worthwhile.
Should I wash fabric before reupholstering?
No matter what your upholsterer tells you, wash the fabric before you have slipcovers made. I promise you: It will shrink massively. Otherwise, the minute you take the covers to be dry-cleaned – which involves liquid – they won't fit anymore.
How do you reupholster a chair without sewing it?
9:0213:01HOW TO REUPHOLSTER A CHAIR// NO Sew! // Next Level Lifestyle SeriesYouTubeStart of suggested clipEnd of suggested clipThen i just took that tacky spray sprayed it on the back of this fabric. And stuck it up here soMoreThen i just took that tacky spray sprayed it on the back of this fabric. And stuck it up here so that i made sure it fit and then i hot glued around the fabric. Securing it even tighter.
How tight should upholstery fabric be?
Make sure to pull the fabric, but not too tight. Loosey-goosey fabric does not look professional, but pulling too tight gives you puckers.
Can office chair be repaired?
Luckily, many of the most common office chair issues can be fixed with a bit of elbow grease, your home tool kit and some office chair spare parts. To diagnose and fix your broken office chair, read on below.
How do I replace the foam in my office chair?
Disassemble the chair. ... Remove the old fabric and foam from the wooden supports. ... Trace and cut the new foam and fiberfill wrap for the seat and backrest. ... Arrange the foam cushion and fiberfill wrap squarely on the wooden supports, and then cover with the fabric (again leaving extra length all around for folding).More items...•
How can I cover my office chair without sewing?
0:143:21No-Sew Office Chair Makeover - HGTV Handmade - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut a piece of fabric that is two to three inches longer than the cushion on all four sides thisMoreCut a piece of fabric that is two to three inches longer than the cushion on all four sides this doesn't have to be exact. Now you'll want to begin to pull the fabric over the cushion.
How do you fix a ripped office chair?
Here are steps you can take to repair a torn/scuffed office chair....Repairing a Torn Office ChairSTEP 1 Wipe Down. The first step is to wipe the affected area with an alcohol cleaner. ... STEP 2 Sand Any Scuffs. ... STEP 3 Trim the Area. ... STEP 4 Insert and Secure Sub-Patch. ... STEP 5 Add Filler. ... STEP 6 Apply Colorant and Finish.
How to get staples out of a chair cushion?
Once the fabric backing is removed, you can get at the staples that hold the cushion and fabric in place. ( If you had a plastic backing on your chair, it should look something like the photo above when you remove the backing.) Pull out all of the staples you can find! Once the staples are gone, remove the fabric from the cushion, but leave all the foam in place.
How to put a plastic cover back on?
If you had a plastic cover, pop it back on. Otherwise, staple the backing fabric back on.
How to make a cushion with pleats?
Fold the fabric into pleats behind the cushion to help pull the fabric tight around the corners. Staple all the way around the cushion, pulling the fabric tightly and evenly around the whole thing. Once you’re done, cut off any extra fabric at the back of the cushion.
How to get staples out of fabric?
I found the easiest way to do this was to stick a flathead screwdriver under the staple and pry, then grab the staple with a pair of pliers and pull it all the way out. You don’t need to be too careful of the fabric since you’ll be replacing that anyway.
Do seat cushions have plastic backing?
Again, your seat cushion may have a plastic backing ( in which case, just pop it off, same as before) or it may have a fabric backing. In my case, it was just a light piece of black fabric to cover the wood at the bottom of the chair.
Can you reupholster an office chair?
It’s surprisingly easy to reupholster an office chair! Whether the fabric on your office chair is falling apart, or you just want to replace the boring black fabric with something brighter and more colorful, it’s easy to give your chair a total makeover! Today’s tutorial will show you, step by step, how to reupholster an office chair in a single afternoon!
How much does it cost to reupholster an office chair?
It costs about $50 to $2,000 to have an office chair reupholstered. You can reupholster in just about any color you want, and the cost varies depending on what type of fabric or leather you choose for the new upholstery.
What to do if you have never reupholstered?
If you have never reupholstered before, it may be helpful to enlist the help of someone who knows what they’re doing. Moreover, you can ask friends and family members for advice.
How Much Fabric Do I Need to Recover a Desk Chair?
The amount of material needed depends on whether you plan to replace the existing padding entirely or add additional padding to make the chair look better.
How to measure the square footage of a cushion?
To determine how much fabric you’ll need, measure the width and length of the current cushion along its longest edge. Then multiply those measurements to calculate the total square footage of the old cushion.
What is the most durable material for upholstery?
The most durable material for upholstery is genuine leather because it resists stains and wears over time.
Do you need fabric to reupholster?
Of course, you need fabric to reupholster.
Can you sew a panel for an office chair?
Another option is to buy readymade covers that come in standard sizes. Yet another option is to sew your panel using patterns designed especially for office chairs.
What is reupholstering a chair?
Reupholstering involves selecting the material you want to use, re-padding the chair, and attaching the new upholstery, then putting the furniture back together if and as needed so that it's ready for use.
What is the process of reupholstering furniture?
Regardless of the type of furniture you're planning to reupholster or the material you plan to use when doing so, broadly speaking, the reupholstering process falls into three basic categories: Removing the old material, refinishing the visible wooden sections of the furniture, if any, and then the actual reupholstering process itself.
Can dining chairs be reupholstered?
Dining chairs come in all shapes and sizes, but the fundamentals of reupholstering them are largely the same. Here are a number of video tutorials on the matter to guide you:
Can you reupholster cane back chairs?
Cane backed chairs are commonly found in dining rooms, so the process of reupholstering them is broadly similar to what you'll find in the section on dining chairs (below). There are also a few videos that walk you through the process of reupholstering this type of chair in particular.
Do bar stools have round seats?
Note that many bar chairs or stools have round seats. This adds several new challenges to the task of reupholstering them without leaving wrinkles or other imperfections. Here's a great tutorial to help with that specific case:
Can you reupholster furniture?
For a solid majority of people, the answer to that question winds up being no, and we totally understand that. Reupholstering furniture isn't going to be for everyone. Our advice is the same no matter what type of chair or another piece of furniture you're talking about: Take it to a professional and pay to have someone else do it.
Can you use Captain's chairs in RVs?
These types of chairs are really tricky to work with because deluxe Captain's chairs in RVs tend to have a lot of components. Honestly, this is probably a bigger job than most Do It Yourselfers can tackle without at least some professional help. Unfortunately, we only found very few tutorials online to guide you for that very reason.
