To Pan, Rotate, and Zoom in Autodesk Inventor View
- Click Pan or press F2. The cursor changes to the pan cursor .
- Use the arrow cursor to drag the view in the graphics window. You can also pan the view using the Intellimouse. Hold down the wheel button, move the mouse in the direction you want to pan, and release the wheel button to stop panning.
How to make things move in inventor?
- Pick geometry on a moveable object to select one or more components or work geometry as the basis for a translation or rotation.
- Use the CTRL key to add any number of components to a selection.
- Drag a window around the components to select.
- Select components in the browser instead of the graphics window using the CTRL key.
How to revolve a sketch in inventor?
Revolve the Sketch Profile
- Click Model tab Create panel Revolve on the ribbon, or press R to invoke the Revolve command. ...
- Observe that the sketch profile automatically highlighted when you invoked the Revolve command because it is the only sketch in the part file. ...
- Click to select the long horizontal axis of the profile.
How to create iparts in inventor?
- Click Manage tab Author panel Create iPart to open the iPart Author.
- All parameters renamed in the Parameters dialog box are already added as columns in the iPart table. ...
- In the left pane, the browser shows all part data. ...
- Add the necessary attributes on the tabs: Properties Expand the Project folder and add Part Number. ...
How to revolve in Autodesk Inventor?
- Angle A: Specifies the revolve angle between start and end planes. ...
- Angle B: Specifies the angle for the secondary direction. ...
- Full: Revolves the profile a full 360 degrees.
- To: For part revolutions, requires an ending face or plane on which to terminate the revolution. ...
How do I rotate an object in Inventor assembly?
On the ribbon, click Assemble tab Position panel Free Rotate . Click the component to rotate. Drag to the appropriate view of the component. To rotate in any direction, click inside the 3D rotate symbol and drag in the appropriate direction.
How do I rotate part of an assembly?
Using the PropertyManager to Rotate a Component Click Rotate Component (Assembly toolbar) or Tools > Component > Rotate. The Rotate Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.
How do you rotate a 90 degree piece in SolidWorks?
0:362:23How to Rotate Part in SOLIDWORKS - YouTubeYouTubeStart of suggested clipEnd of suggested clipClick on the command. And the move copy body property manager appears if you do not see theseMoreClick on the command. And the move copy body property manager appears if you do not see these options scroll down to the bottom of the property manager. And select on the translate rotate radio.
How do you rotate an object 90 degrees in SolidWorks?
Click Rotate View (View toolbar) or View > Modify > Rotate then drag the pointer . Drag with the middle mouse button. Press the arrow keys. Hold down Shift to rotate in 90° increments.
How do I change the orientation of a part in a Solidworks assembly?
To fix this, go to Insert, Features, Move/Copy. In the PropertyManager, make sure you are in Translate/Rotate mode and not Constraints mode. (See button at the bottom of the PropertyManager). Type in the desired angle of rotation in the proper box to rotate the body about the X, Y, or Z-axis.
How do I rotate a part in a Solid Edge assembly?
0:252:20Solid Edge Tips & Tricks: Offset and Rotate Reference Planes - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd put it in an angle to create a feature at an angle through my part. So to start with I'm justMoreAnd put it in an angle to create a feature at an angle through my part. So to start with I'm just going to create a coincident plane on this face. Then I'm just gonna drag it off of the part.
How do you move parts in an assembly in Solidworks?
Select the move component button on the assembly toolbar. The cursor will change to and you can now move individual parts. Click on green part of the model and drag it up or down.
How do you rotate a part in Solidworks drawing?
To rotate a drawing view around its center point:Click Rotate View. (View toolbar), or right-click the view and select Zoom/Pan/Rotate > Rotate View. ... Do one of the following: Drag the view to the desired rotation. ... Set options, then click Apply: ... Click Close to close the dialog box.
How to simulate mechanical motion?
You can simulate mechanical motion by driving a relationship through a sequence of steps. After you have constrained or added a connection to a component, you can use the Drive relationship command to animate it by incrementally changing the value of the constraint. For example, you can rotate a component by driving an angular constraint from zero to 360 degrees. The Drive relationship command is limited to one relationship, but you can drive additional relationships by using the Equations command to create algebraic relationships between relationships.
Why do you move components?
You might want to move components to: Display relationship dependencies as an elastic band to analyze the relationships. See a face or feature on the selected component.
How to use grip snap?
Select components in the browser instead of the graphics window using the CTRL key. Use a pre-defined selection filter available on the Select drop-down list, and then activate the Grip Snap command.
How to drag a component to a new location?
You can click any component in the edit target (the file that contains edits) and drag it to a new location. If you select a component that is not a child of the edit target (a part in a subassembly), the component acts as a handle and drags the whole subassembly.
How to facilitate selection of a face or feature on a component?
Facilitate selection of a face or feature on a component by moving it to an uncluttered area of the screen.
Do unconstrained components stay in their rotated positions when you update the assembly?
Unconstrained components remain in their rotated positions when you update the assembly.
Can you rotate a constrained component?
You can rotate a constrained component. When you update the assembly, the components constrained to the rotated component snap into their constrained positions. The rotated component determines the viewing orientation of the components. Unconstrained components remain in their rotated positions when you update the assembly.
What happens when you zoom in inventor view?
When zooming with the wheel, Inventor View uses the cursor position as an anchor point for the zoom. As a result, if you don't move the cursor, rolling the mouse forward and then back are not reciprocal actions.
How to change the view of a picture without changing the magnification?
Pan. Panning shifts the location of the view without changing the magnification, as though you were moving the image from side to side in front of a camera lens. Use the Pan command on the Standard toolbar to move the view in the graphics window in any direction planar to the screen. You can pan the view while other commands are active.
How to zoom in on a photo?
Zoom in or Out 1 Click Zoom or press F3. 2 Use the arrow cursor to click and drag the view to the desired scale. Dragging down increases view scale; dragging up decreases view scale. 3 Release the mouse button when the image is at the required magnification. The Zoom command remains active until you select another command.#N#You can also zoom the view using an Intellimouse. Roll the wheel forward to zoom in, and roll back to zoom out. When zooming with the wheel, Inventor View uses the cursor position as an anchor point for the zoom. As a result, if you don't move the cursor, rolling the mouse forward and then back are not reciprocal actions.
How to rotate a drawing view?
To rotate a drawing view, you select a model edge and then rotate the edge by a specified angle, or to vertical or horizontal position. You cannot rotate a view that has a dependent section or auxiliary view.
What happens when you rotate a parent view?
By default, a parent view and its child views keep the same orientation. When you rotate a parent view, you can either maintain or break alignment of dependent view (s). When you rotate a child view, the child view orientation becomes independent on the parent view.
What are the colors of the axis in the 3D move/rotate triad?
Because you can rotate the triad command, the colors help you identify axes. The colors correspond to the default colors of the principle part axes: Red is the X axis. Green is the Y axis. Blue is the Z axis. If you customize system colors or the triad colors, the colors might not match the part axes.
What is the 3D move command?
In the following image, the 3D Move/Rotate command is used to move a work point consumed by a Loft to Point feature.