- Prepare the Drain. Before you begin to use the drain cleaner, you should plug the electric snake into an available socket.
- Add the Electric Drain Snake. When ready, place the end of the drain snake down into the drain hole. ...
- Feeding the Snake Down. Slowly, the snake will progress through the drain towards the clog. ...
- Removing the Snake. When the blockage has been freed, you will need to move the snake out of the drain. ...
How do you hook up a snake to a drain pipe?
Get access to the drain by removing the overflow assembly or stopper. Loosen the screw to your drain snake's or auger's cable housing. Use your hand to carefully insert the head of the cable into the drain and through the pipe. Using your hand, turn the manual crank or turn the motor on to feed the cable further into the drain line.
How does a power plumbing snake work?
Operating the power plumbing snake the plumber fed the snake, basically a strong flexible wire coil which is rotated during operation, into the drain line until an obstruction in the drain was indicated by resistance felt against the proceeding power snake.
Can you use a snake to unclog a sewer line?
The best snake for clogs deep inside a drain is the Husky Drain Auger. With 50 feet of rust-resistant cable and spring steel wire, you can get to clogs a standard drain snake can't reach. It's best to use this long snake for the main sewer, laundry, or driveway drain.
How do you use an auger on a drain snake?
Loosen the screw to your drain snake's or auger's cable housing. Use your hand to carefully insert the head of the cable into the drain and through the pipe. Using your hand, turn the manual crank or turn the motor on to feed the cable further into the drain line.
How do you set up a drain snake?
2:494:51How to Snake a Drain | Step by Step DIY Plumbing | Zillow - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what we're going to do is we're just going to start pushing it through the pipe. Until. I meetMoreSo what we're going to do is we're just going to start pushing it through the pipe. Until. I meet resistance once I meet resistance. Then I'm going to tighten up this thumb screw.
How do you start a sewer snake?
How Do I Use It?Align the end of the snake into the drain and push it inside. ... Keep turning the handle until you feel that the snake has reached an obstruction. ... Keep on rotating the snake so it breaks the blockage apart.More items...•
How do you use a power snake?
2:396:01Drain Cleaning 101 - Drum Style Power Snake - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I started the machine. And then what I do is I just pull maybe about a foot or sole of slot outMoreAnd I started the machine. And then what I do is I just pull maybe about a foot or sole of slot out of the machine and gently put pressure down into the pipe.
How do you use a motorized snake?
5:1610:32Metro Power Drain Cleaner How To Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the power switch on the machine to the forward position tighten the knob on top of the feed. SoMoreTurn the power switch on the machine to the forward position tighten the knob on top of the feed. So that the feed roller presses against the cable. Be sure not to over tighten.
How do you use a sewer drain snake?
How to Use a Drain AugerStep One: Insert the Drain Auger. Grab your drain auger and insert the end of it into the drain or directly into your toilet. ... Step 2: Navigate The Drain Auger Towards The Clog. Crank the handle clockwise as you slowly push the drain snake into the toilet. ... Step Three: Pull the Drain Auger Out.
How do you unclog a main sewer line?
Hot Water to Loosen Sticking Debris Allow hot water to run through your plumbing system for at least five to 10 minutes. The hot water helps to loosen debris such as deposited grease, oils, or any coatings on the walls of the drains. Doing this several times might best and easiest way to unclog that main sewer line.
How do you unclog a drain if a snake doesn't work?
What to do when snaking a drain doesn't workClean the drain snake. If you haven't cleaned it since using it last, the old clog may still be embedded on the corkscrew end. ... Tighten the thumbscrew. To feed the wire into the drain, tighten the thumbscrew that locks the wire in place. ... Use a different type of auger.
How do you use a manual sewer snake?
A manual drain snake is a slender and long wire like structure that it could fit into any common styled drain hole. Push one end of the snake into the drain and turn the handle. This movement would coil the snake through the drain. Keep sending in the snake till you find a resistance for the movement of the snake.
Where to insert the power plumbing snake when clearing a blocked line
Once a drain line blockage is traced to the main building drain, it makes sense to try to clear the blockage. The procedure of using a power snake or drain auger can either fix the drain line blockage, or even if that doesn't happen, the procedure can diagnose:
Drain Cleaning Machines & Power Augers
The power drain cleaning auger shown at left [we need a brand ID] provides an illustration of the key working parts of a power drain cleaning machine.
Ask a Question or Search InspectApedia
Try the search box just below, or if you prefer, post a question or comment in the Comments box below and we will respond promptly.
How to clean a toilet that has no standing water?
If there is no standing water and the toilets are stopped up you will run the cable toward the house. Position the drain snake as close as possible to the cleanout. This will help so it will not tangle as easily.
How to get cable out of drain?
Slowly feed the cable into the drain while holding it steady. Be ready to back the machine off quickly in case you hit a tough clog that can cause the cable to kink. As soon as you reach a tough spot slowly ease the cable back a few feet. Feed the cable forward again until you feel resistance.
What is a sewer snake?
A sewer drain snake is used to clear a main line stoppage. If you have confirmed that you have a main sewer line clog you may wish to attempt to clear it yourself. Fortunately, like other drain snakes, a sewer drain snake can be rented for the day from a tool and equipment rental location .
How to get rid of a snake in a drain?
This will help so it will not tangle as easily. The less slack you have on the cable the safer you will be. Put on a pair of leather gloves that will not get grabbed by the machine while it's turning. It is best to get the gloves from where you rent the snake because they will know ...
Why is it important to hold on tightly to a cable?
Holding on tightly to the cable is very important as letting it go can cause it to kink and injure you. Many machines will come with a spring that you run the cable through so the cable can not jump out and get tangled up. If your machine does not, keep two hands on the cable at all times.
Who is Aaron Stickley?
Aaron Stickley is a licensed plumber with first-hand knowledge in solving home plumbing problems. A sewer drain snake is used to clear a main line stoppage. If you have confirmed that you have a main sewer line clog you may wish to attempt to clear it yourself.
