Hang Towel Bar
- Using the set screw and wrench provided with your towel bar, attach one of the bar holders to the bracket.
- Slide the bar into place and attach the next bar holder.
- Put a little pressure on the towel bar to make sure it is secure.
- Hang towels.
How do you install two towel bars on a wall?
The final step of the project is to install the two towel bars. For each bar, fasten the metal mounting brackets to the wall; make sure the screws you use are long enough to go all the way through the drywall and into the 1x4 backing. Then, slide the towel bar sockets over the metal brackets until you've got them tightly wedged in place.
Can you use drywall screws for towel bars?
That is because drywall is made of gypsum plaster and is too soft to hold screws. If the towel bar is the right length you may be able to mount one, or both of the escutcheons, directly to the wall studs behind the drywall. Use 1 3/4-inch drywall screws to mount the anchor plates.
How do you fix a towel bar that won't stay up?
Replace light-duty plastic anchors with heavy-duty anchors that will keep towel bars in place even after years of hard use. Loosen the setscrew that fastens the post to the mounting plate. Remove the post and the bar. Then unscrew the mounting plate from the wall and remove the old anchors.
What is a towel bar?
The typical towel bar consists of a single bar running between two escutcheons that project from the wall surface. Usually, the escutcheons are not bolted directly to the wall surface but are attached to anchor plates. The anchor plates are bolted to the wall and the escutcheons are fastened to them with hidden set screws.
How do you secure a towel bar in drywall?
0:4613:40How To Install A Towel Bar In Drywall - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you use the bracket which comes with the towel bar and these bolts which you'll have to purchaseMoreSo you use the bracket which comes with the towel bar and these bolts which you'll have to purchase on your own most and will come with this you drill a big enough hole in the right position stick.
How do you attach a towel bar to tile without drilling?
Apply a small bead of glue to the back of the towel rack or mounting brackets and press them firmly into place. Do not apply too much adhesive—your product instructions should give you information on the amount you need. Quickly clean up any glue that has seeped out around the edges.
How do you get a towel bar to stay on?
So try to tighten the screws that hold the mounting plates in place. If they tighten up securely, just remount the posts and the bar. If they don't tighten firmly, remove the screws and the mounting plates. To remove the old anchors, pry them out with a screwdriver or poke them in and let them fall inside the wall.
How are towel bars attached to wall?
0:181:47How to Install a Towel Bar | DIY Bathroom Renovation IdeasYouTubeStart of suggested clipEnd of suggested clipUsing the hardware provided firmly secure the mounting brackets to the wall with a drill orMoreUsing the hardware provided firmly secure the mounting brackets to the wall with a drill or screwdriver. Next using the set screws and wrench provided secure.
How do you anchor a towel bar in tile?
5:4314:01How To Install A Towel Rack On A Tile Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet's take this and mark this. Now where our pleat is going to go to to hold the new towel rack on.MoreLet's take this and mark this. Now where our pleat is going to go to to hold the new towel rack on. So what we're going to do. Now is we're going to take the bracket that comes with. It.
Can you glue towel rail to tiles?
The process is the same for both plasterboard and tile. Here's what you need to do. Measure and mark the walls where you want the towel rail to be fixed. Apply an appropriate amount of glue to the back of the towel rack or mounting brackets and press firmly into place.
How do you hang a towel rack without screws?
Tips on hanging a towel rack in your bathroom Cut the adhesive tape to the maximum length of the mounting bracket and press the double-sided tape firmly onto the wall in the proper location. Hold for ten seconds. Remove protective film from the tape and press the mounting bracket firmly onto the tape.
How do you fix a loose bathroom towel rack?
Insert toggle bolts in each bracket. If needed, enlarge the bracket holes in the drywall with a screwdriver, and insert the toggle bolts in the holes. Tighten the toggle bolts so the brackets are secure. Mount the towel rack on the wall and tighten the set screws.
Do towel racks need a stud?
Studs provide the best, most secure place to anchor a towel bar. But when there isn't a stud where you want it to be, your towel-bar screws need a good anchor in the drywall. Forget about those cone-shaped plastic anchors often packaged with the bar; they pull out too easily.
How do you install a bathroom towel bar?
0:431:56How To Install: A Towel Bar - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter the wall anchors are in screwing the brackets for the new towel bar. With the brackets mountedMoreAfter the wall anchors are in screwing the brackets for the new towel bar. With the brackets mounted simply connect the new towel bar double checking to make sure it's. Level.
How do you attach a towel bar to a toggle bolt?
1:023:30How to Fix a Broken Towel Rack with Toggle Bolts - NO Drywall Repair!YouTubeStart of suggested clipEnd of suggested clipYou simply insert the v away from the head of the bolt. Onto the bolt. Twist it a few times. And itMoreYou simply insert the v away from the head of the bolt. Onto the bolt. Twist it a few times. And it acts as an anchor to traction against yep so when it goes in the wall it pops. Open.
How much weight can a towel bar hold?
The maximum weight capacity for the entire towel bar is 33 pounds, while the capacity for each individual arm is 11 pounds.
How do you hang things on tile without drilling?
It's always handy to have some hooks in the bathroom for hanging up towels, dressing gowns, shower puffs and other bathroom accessories. But drilling a hole into your tiles to fix a hook to the wall is not exactly ideal. So here's the solution - use VELCRO® Brand HANGables® Adhesive Hooks instead!
What adhesive sticks to ceramic tile?
Epoxy mortars work well for porcelain and ceramic, as well as for glass, stone, metal, mosaic, and pebbles. Epoxy mortars can even be used for installing rubber flooring or wood block flooring.
What tape sticks to ceramic tiles?
tesa® Mounting Tape for Tiles and Metal has been specifically developed for mounting mirrors and other thin objects (up to 4mm thick) on solid and smooth surfaces like tiles, metal and most plastics, even in damp environments like bathrooms. It even compensates for minor surface irregularities.
How do you hang something on ceramic tile?
Hanging pictures on tiles with adhesive tape or hanging strips. Simple double-sided adhesive tape can be a good, simple and above all a very quick solution. With a double-sided adhesive tape you can hang small, lighter pictures securely and firmly on your wall without drilling a hole into the tile.
How long does it take to install a towel bar?
2 to 3 hours to install each towel bar (doesn't include drying time for the joint compound)
What is a hollow wall anchor?
Hollow-wall anchors are great for hanging pictures, framed mirrors and bulletin boards on drywall. But these fasteners aren't strong enough to support extremely heavy loads. And they often work loose when used to attach fixtures that are always being jostled and tugged at, such as towel racks, toilet paper holders, grab bars and curtain rods.
Can towel bars be yanked out of the wall?
You can now enjoy your new towel bars, knowing they'll probably never get yanked out of the wall, or come crashing suddenly to the ground.
How high should a towel bar be?
The average height for a towel bar and a hand towel ring is 48 inches from the floor. If you’re working in a children’s bathroom, the standard height is 36 inches.
Why do towels loosen the wall?
Towel racks sure take a beating! The constant load of towels, sometimes wet and heavy, eventually causes the screws in the walls to loosen. Whether it’s drywall or tile, drilling new holes in your bathroom walls only adds to the damage. We’ve got a better solution!
What is the best adhesive for tile wall?
When working with two non-porous surfaces, like a tile wall and stainless steel towel rack, reach for Loctite Power Grab Ultimate Construction Adhesive . This all-purpose adhesive packs a powerful punch and adheres to any surface, porous or not. It has zero second grabbing power, and allows 5 minutes for repositioning.
Do towel bars need adhesive?
If you’re hanging a new towel bar, look for a model with a non-mechanical mounting system. These types of no-drill towel bars typically come with adhesive strips. The catch: the strips can weaken quickly due to the humidity in a bathroom. We recommend using a stronger adhesive for longer life.
How to get a towel bar out of a towel bar?from upgradedhome.com
Grab one of the brackets and start twisting it. Keep twisting until you feel the portion of the bar installed there pop free. You don’t have to work on the opposite end because the towel bar can already be removed.
Where Is the Ideal Spot for a Towel Bar?from upgradedhome.com
You want the towel bar in a spot you can reach easily while your skin is wet. Keep it close to your shower or to your sink if you have one in the bathroom. Installing multiple towel bars is also worth considering if you have the space for them.
How High Should the Towel Bar Be on Your Bathroom Wall?from upgradedhome.com
If all the people inside your home are adults, you can set the height at around 48 inches. That’s the standard height for towel bar placement.
Why do you need towel bars?from upgradedhome.com
Towel bars help keep your towels nice and dry. They also preserve the longevity of towels and could prove useful if you ever need to change inside the bathroom. Adding them to your bathroom is a good idea.
What is innovative installation hardware?from moen.com
Innovative installation hardware allows users to pre-install the clips onto the sink and tightens quickly and easily underneath with the provided installation tool, allowing installers to spend minimal time.
What is a towel bar?from upgradedhome.com
Written by Upgraded Home Team in Bathroom. Towel bars are helpful accessories to have inside the bathroom. That is especially true if you find trying to dry off with moist towels to be very annoying. After some time though, you may find that the towel bar’s placement inside your bathroom is not ideal.
How to remove a towel bar with no screws?from upgradedhome.com
How Do You Remove a Towel Bar with No Screws? Step 1: Get Some Screwdrivers. Step 2: Loosen Up the Brackets and Remove the Towel Bar. Step 3: Remove the Brackets. Step 4A: Take Out the Pieces behind the Brackets by Hand. Step 4B: Use a Flathead Screwdriver to Remove the Pieces behind the Brackets.
How do you hang a towel rack without screws?
A towel rack is one of those items that is in constant use in the home. Therefore, a bathroom towel rack without screws can be an effective way to avoid messing with the walls. The alternative to screws is a quality adhesive that holds the rack to the wall permanently to ensure it’s in place for a long time.
How to install towel rack without screws
If you have to install a towel bar, select a non-mechanical option so that you don’t have to drill. Installing a towel bar on tile without drilling is easy because the mounting system has adhesive strips. Most of these adhesive strips are weak, and using them means the towel rack won’t stay on the wall for long.
How to secure towel rack to drywall
Position the towel rack, then mark the proper position to place it. Inspect the towel rack to determine its design and the best way to mount it on drywall. Hold the mount to the wall, use a pencil to mark the perimeter, and repeat the same for the second mount.
Conclusion
After remodeling or new construction, bathroom accessories are the final steps to making it complete and usable. It’s easy to make mistakes here and mess up the new walls but knowing how to hang a towel rack without screws is the best way to maintain the beauty of your beautiful walls.
What is a towel bar?
The typical towel bar consists of a single bar running between two escutcheons that project from the wall surface. Usually, the escutcheons are not bolted directly to the wall surface but are attached to anchor plates. The anchor plates are bolted to the wall and the escutcheons are fastened to them with hidden set screws.
What is the hardest material to fasten to a towel bar?
Drywall is a common wall material in modern homes and is one of the most difficult materials to securely fasten to a towel bar. That is because drywall is made of gypsum plaster and is too soft to hold screws.
What is a toggle bolt?
The standard hollow-wall fastener is called a toggle bolt. These fasteners have spring-loaded wings that open in the cavity behind the wall. First, you must drill a hole in the drywall that is large enough to push the wings through. Place the anchor plate on the bolt, then thread the wing mechanism onto the end.
What type of bit to use to drill tile?
The best type of bit for drilling tile is a glass/tile bit, not a masonry bit. Mark the locations for the holes and start drilling slowly while maintaining a firm grip on the drill to keep the bit from wandering off the marks. After a few rotations, the drill will cut through the tile glaze.
Can you mount a towel bar to a wall?
The technique for mounting a towel bar to a wall depends on the type of wall. Only when you know what the wall is made of--drywall or ceramic tile--can you choose the proper fasteners and installation technique required. Drywall is a common wall material in modern homes and is one of the most difficult materials to securely fasten to a towel bar.
Do you need to drill pilot holes for drywall?
No need to drill pilot holes, just position the plates and use a power screwdriver to drive the screws through the drywall into the wood studs. If you cannot mount the anchor plates to the studs, you will have to secure them to the drywall. The standard hollow-wall fastener is called a toggle bolt.
How to Fix a Loose Towel Bar?from thehomebit.com
Now that you have all your tools ready to go, it’s time to get started on fixing the towel bar. Follow the steps below to fix a wobbly and loose towel bar and make it steady.
How to get a towel rack off?from thehomebit.com
Now, if your towel rack is already loose, give the rack a good shake, and it will come off. If the rack resists this move, you can add some hot water and let it soak for a while . Afterward, the glue bond should loosen up and come off.
Is it easier to glue a wall?from thehomebit.com
Glue installations are much easier. But they tend to come off too soon. If this is the way you want to go make sure that the glue you are using is waterproof and strong.
Do towel racks come pre-installed?from thehomebit.com
Towel racks usually come pre -installed in the house you are moving into. But what if you don’t like the current ones? Or what if the ones that are already installed are barely hanging on to the wall?
Where should towel bars be placed in a shower?
Towel bars and other towel accessories should be placed conveniently near the sink and other bath fixtures. All shower bars should be placed on the longest wall in the shower and should be as horizontally long as possible.
Why do you put a towel bar outside the bathroom?
The other reason for placing a towel bar outside the bathroom is that it may be hard to get the towel if you’re simply washing your face or hands at a sink outside the bathroom. You’ll be forced to walk into the bathroom, use the towel, then leave. If the towel bar was outside, it would be easier.
Why do you need a towel bar in the shower?
A towel bar inside the shower provides convenience because you can easily grab a towel without getting out of the shower or opening up any doors.
How to clean mold from shower door?
Use vinegar to clean shower doors and other areas infested with mold. For your towel, add a cup of white vinegar to the washing machine then clean with hot water.
Do shower bars rust?
Bars made from stainless steel and with rubber grips on them don’t damage the wall when you put things on top of them. Stainless steel doesn’t rust although it’s quite easy to clean rust from shower bars.
Can you use a towel bar as a shower caddy?
If you’re planning on using your towel bar as a shower caddy, then this is especially vital to consider before placing it inside of your bathroom space. There are many sizes available and, if you don’t want to measure out what size will work best for your situation, use an old paper clip and mark where height should fall.
Can a towel bar be damaged by water?
A towel bar made of rust-resistant materials will not be damaged by the water and can thus survive in the shower. Otherwise, you’ll be dealing with lots of rust on the shower rod.
How long does it take to install a towel bar?
Step by Step – Installing a Towel Bar. Time needed: 15 minutes. Here is a breakdown of the necessary steps to installing a towel bar in your bathroom or shower area: Get a general idea where you want the new towel bar. You want to use a level to ensure the bar will be straight once mounted on the drywall.
What finishes are used in towel racks?
Finishes can be chrome, marble, brushed, antique, copper, or just about anything else you can imagine or dream up.
Can you put a towel bar on drywall?
It sounds simple, but we’ve seen many a frustrated consumer struggle with how to install a towel bar on drywall in a bathroom. These can be of the bar variety (two anchor points) or towel ring style (single anchor point). There are even space-saving models with articulating arms and multiple racks that swing out of the way to allow for more towel capacity. Finishes can be chrome, marble, brushed, antique, copper, or just about anything else you can imagine or dream up.
Can you fasten a towel bar to the wall?
That’s all there is to it. Of course, if fastening a towel bar directly to the wall isn’t going to work in your bathroom, feel free to check out the many freestanding towel racks available on the market.
Do you need a drill bit for tapcons?
In the case of Tapcons, you can often get the required bit right in the container. With a concrete anchor, the screws and anchors come together, but you need to buy a drill bit. The package should tell you what size concrete drill bit you need.
Can towel holders be drilled into drywall?
Most towel holders come with templates that can be used to layout the exact position for the anchors which will need to be drilled into the drywall and secure the towel bar to the wall. We recommend using the included anchors as they will match up perfectly with the supplied screws.
