how do you secure curtain cords

Use a cleat, cord tidy, tension pulley or safety device to secure curtain or blind cords to the wall Do not hang toys or objects that could be a hazard on the cot or bed Don't hang drawstring bags where a small child could get their head through the loop of the drawstring.

Full Answer

How do you hook up curtains to a curtain carrier?

Crossing cords over will result in jamming when drawing curtains. Push bottom cord between plastic slides of carrier 2. Slide carrier 2 onto track section making sure this cord remains at the bottom. Do not hook cord over lug on carrier 2 at this stage. Place pulley 2 onto track section and secure with screws.

How do I get the cord to drop off the curtains?

Hook cord over the lug on carrier 2 to secure it. Replace sliders at each end. Re-attach track onto brackets and re-hang curtains. This method will give you a right hand cord drop. If you require a left hand cord, just reverse all operations above.

How do I re-attach curtain track to the wall?

Place pulley 2 onto track section and secure with screws. Draw the cord until the right hand carrier 1 is as far to the right as possible. Holding the cords taut, push carrier 2 as far to the left as possible. Hook cord over the lug on carrier 2 to secure it. Replace sliders at each end. Re-attach track onto brackets and re-hang curtains.

How do I secure the cords to the track?

Secure pulley 1 onto track with screws. Push knotted cord between plastic sliders of carrier 1. Hook knot over lug on carrier 1. Place both cords inside track section then slide carrier 1 onto track making sure the knotted cord remains at the top. Crossing cords over will result in jamming when drawing curtains.

Why is it important to secure cords to the wall?

How to keep kids safe from dangling cords?

How to make a loop operated blind safer for kids?

What is a tensioner for blinds?

Do blinds have cords?

How do you secure blinds cords?

0:432:55BBSA Make It Safe - How To Make Venetian Blinds Safer - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe screws should be tightened using a hand screwdriver to ensure a secure fitting. Now the cord canMoreThe screws should be tightened using a hand screwdriver to ensure a secure fitting. Now the cord can be securely stored in a figure of 8 pattern on the cleat.

How do you tie up curtain cords?

0:061:37Blind Cord Safety Knot - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm going to show you now is just a really quick knot you can use anywhere that keeps these cordsMoreSo I'm going to show you now is just a really quick knot you can use anywhere that keeps these cords out of reach and also keeps these cords from getting tangled. This is just a slip knot make a loop.

What is a cord cleat for a blind?

Cord cleats keep dangerous, dangling cords out of the way of playful children and pets. Cord cleats are easily attached to the wall on either side of the window. They're used to wrap the window covering's pull and/or tilt cords around them, keeping the cords tied neatly up and out of the reach of grabby little hands.

How do you hide blind strings?

0:581:53How To Shorten a Lift Cord on Blinds or Shades - YouTubeYouTubeStart of suggested clipEnd of suggested clipFrom the head rail to the tape. And mark on the other window treatments in the room as they sayMoreFrom the head rail to the tape. And mark on the other window treatments in the room as they say measure twice cut once after you've double-checked your measurements. And made sure that your blinds or

How do you install cord cleats?

0:371:35How to Install Cord Cleats - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe suggest installing the cord cleats a few inches apart. So that you can wrap them tighter. Take aMoreWe suggest installing the cord cleats a few inches apart. So that you can wrap them tighter. Take a screw and drill it right through the cleat into your wall.

How do you use window blind cords?

1:174:45How do Window Blinds work? - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe to lift strings go right to the bottom along the inside and one string goes down here and theMoreThe to lift strings go right to the bottom along the inside and one string goes down here and the other goes down here for larger blinds we might even have three or more lift strings.

What is a safety cleat?

This simple device is attached high onto the adjacent wall. Then the user takes the cord and/or chain and completely winds them around the cleat, thus preventing children getting caught around the chains/cords.

Where do blind cleats go?

The safety cleat shall be installed as close to the headrail as possible and in all cases not less than 1500mm from the floor. The cord must be fully accumulated around the safety cleat(s) when the blind is not in use.

Where do you put blind cleats?

1. Position the device on the wall or moulding, then insert the supplied screw into each hole and install. Cleat should be placed 64” (1.63m) from the floor. Install a second cleat 6” to 12” (15-31cm) above the first, if two cleats are re- quired to hold the cords.

How do you hide long blind cords?

Use a Pair of Cord Cleats You can use cord cleats for both the lifting cords and the tilting cords. You can use cord cleats on wood, faux wood, mini and Venetian blinds, as well as cellular, honeycomb, pleated, Roman and woven wood shades.

How do you hide a Roman shade cord?

18:5950:57Adding control cord to front of Roman shade - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou always have to start on the bottom of the shade. And you're going to run your strings. Up. NowMoreYou always have to start on the bottom of the shade. And you're going to run your strings. Up. Now this is a little flap on this flap right here is hiding the grommets.

Are continuous loop cords safe?

Also unlike standard lift cords, continuous loop cords do not pool on the ground and does not leave any dangling pieces of strings in place. In this sense, they are better and safer than corded shades.

How do you tie curtains back with ribbon?

1:163:298 Creative Curtain Tieback Ideas | A Country Sampler DIY VideoYouTubeStart of suggested clipEnd of suggested clipSlide it up on the curtain panel loop it over the hook arrange. The keys to your liking. And youMoreSlide it up on the curtain panel loop it over the hook arrange. The keys to your liking. And you have a unique tie. Back.

How do you tie a curtain bow?

0:181:01OverTheTop How to: Tie A Bow - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the left is about an inch. Longer than the right take the left go over and under the loopMoreMake sure the left is about an inch. Longer than the right take the left go over and under the loop with the left take the right over. And under and you open it. And that's the way you talk about.

How do you make Velcro curtain tie backs?

Pin a piece of velcro about a half-inch from the end of the fabric. Then pin the opposite side of the velcro to the other end also about a half-inch from the edge. Then sew the velcro in place. Now lay the fabric with the fleece on top of the other piece of fabric with the right sides touching each other.

How do you make curtain tassels?

0:287:37DIY Farmhouse Decor {Tassel Curtain Tie backs} - YouTubeYouTubeStart of suggested clipEnd of suggested clipSome jute twine and that's it the first thing you will need is three pieces of jute twine cut atMoreSome jute twine and that's it the first thing you will need is three pieces of jute twine cut at about five-and-a-half to six beads.

Why is it important to secure cords to the wall?

Securing loops tightly to the wall or floor is important because loops that are free-hang ing pose a strangulation risk to kids. Attach all cord and bead chains loops to the wall or floor using ANSI/WCMA compliant tension devices.

How to keep kids safe from dangling cords?

Keeping loops tied down tightly and mounting tension devices firmly with proper fasteners go a long way toward keeping our kids safe from dangling cord and bead chain loops in our homes. Visit the Window Covering Safety Council website for more information and resources.

How to make a loop operated blind safer for kids?

Shorten Loops. Another way to you can make loop operated blinds safer for kids is to install a shorter cord or bead chain loop. Your blind will still operate completely, but the loop will be higher and harder to reach for kids. Shorter loops still need a properly installed compliant tension device.

What is a tensioner for blinds?

The tensioner is designed to hold the cord or bead chain loop down close against the wall, window frame or trim. It should hold tightly but offer enough slack to operate the blind correctly and smoothly. If there is too much slack, the loop is still an entanglement risk. However, if the tension device is too tight, it can cause the loop to break prematurely. You have to find the sweet spot of being secure while operating smoothly.

Do blinds have cords?

One big part of keeping kids safer around blinds is being sure that all looped cords and bead chain are tied down securely. Lots of different types of blinds operate with a loop of cord or bead chain. You may have cellular or honeycomb shades, Roman or woven wood shades, sheer shades, roller or zebra shades, or even vertical blinds ...

Take Measurements

First, you'll want to remove the curtain, along with the curtain hooks from the rod and carriers. To do this, you can use a stepladder or a chair. You may need to clean the rod if there's been an accumulation of lint or dust. Next, determine how much cord you'll need.

Pulleys and Slides

Next, place the rod face down on a flat surface. If you're removing an old cord, you can untie it from the carriers and pull it out, then push the carriers, also known as "master slides," to the center of the rod. The smaller slides flank the carriers on either side and can be added or removed when needed.

Reattach and Test

Finally, reattach the rod to the brackets and situate the master carrier in the center. Make sure the brackets are secure so that they can carry the weight of rod and the fabric can be carried without sagging. Pull on the draw string to test it out and adjust if needed. You can attach the curtain by securing it to the rod hooks.

How many cords should be fastened after every use of the blind?

Cords should be fastened in a figure of eight after every use of the blind, making sure all the spare cord is secured on the cleat.

Can you make your blinds safer?

Check your blind cords and keep your home safe. Older blinds with looped cords or chains may pose a threat to children but you can make them safer. Changes to standards for blinds in 2014 have led to improved product safety.

Do blinds have child safety devices?

Be aware of the danger. Changes to standards for blinds in 2014 have led to improved product safety. New blinds with looped cords must have child safety devices installed at the point of manufacture or sold with the blind. However, blinds installed earlier may not have these features and millions of households could be affected.

How to put cording in a scuba diver?

Go underneath the right master carrier and pull the cording up through the left hole in the right carrier. Insert the cording into the hole on the right side of the right master carrier and bring it out on the right side of the carrier. Feed it underneath the slides on the right side of the rod.

How to measure curtain rod length?

Measure the rod’s length while it is still on the wall. Measure also the distance from the floor to the top of the curtain rod. Add those two totals together and add 6 inches to allow for errors. Double that amount to determine how much new cording you need to complete this project.

How to make a U-turn on a sandbox?

Direct the cording between the two pulleys on the right side of the rod. Pull it down and out of the rod. Make a U-turn with the cording as you direct it up and over the top pulley on the right side of the rod. Go underneath the slides on the right side as well as the right master carrier.

How to get rid of too much cord on a fishing rod?

If you wind up with too much cord hanging from the rod, pull up on the cording at one of the knots in the left master carrier. Retie the knot to remove the slack and cut off excess cording.

How to tie a cording to a carrier?

Push the cording under the right side of the left master carrier and direct it up through the hole on the right side of that carrier. Tie a double knot in the end of the cording.

What to do if old cording is on a rod?

If the old cording remains on the rod, snap a picture of it for reference, using a cell phone or digital camera.

Do curtain rails break when you open them?

Eventually the cording begins to frazzle and may even break. When you see signs of wear, it’s time to install new cording. It’s not a difficult task.

Why is it important to secure cords to the wall?

Securing loops tightly to the wall or floor is important because loops that are free-hang ing pose a strangulation risk to kids. Attach all cord and bead chains loops to the wall or floor using ANSI/WCMA compliant tension devices.

How to keep kids safe from dangling cords?

Keeping loops tied down tightly and mounting tension devices firmly with proper fasteners go a long way toward keeping our kids safe from dangling cord and bead chain loops in our homes. Visit the Window Covering Safety Council website for more information and resources.

How to make a loop operated blind safer for kids?

Shorten Loops. Another way to you can make loop operated blinds safer for kids is to install a shorter cord or bead chain loop. Your blind will still operate completely, but the loop will be higher and harder to reach for kids. Shorter loops still need a properly installed compliant tension device.

What is a tensioner for blinds?

The tensioner is designed to hold the cord or bead chain loop down close against the wall, window frame or trim. It should hold tightly but offer enough slack to operate the blind correctly and smoothly. If there is too much slack, the loop is still an entanglement risk. However, if the tension device is too tight, it can cause the loop to break prematurely. You have to find the sweet spot of being secure while operating smoothly.

Do blinds have cords?

One big part of keeping kids safer around blinds is being sure that all looped cords and bead chain are tied down securely. Lots of different types of blinds operate with a loop of cord or bead chain. You may have cellular or honeycomb shades, Roman or woven wood shades, sheer shades, roller or zebra shades, or even vertical blinds ...