How to Set Limits for Your Somfy-powered Rolling Shutter With a Remote
- Initiate Programming To initiate programming, press both UP and DOWN buttons simultaneously. The motor should jog. ...
- Check the Direction of Operation Check the direction of rotation by pressing the UP or DOWN buttons. ...
- Setting the Limits Next, we will set the limits. ...
- Confirm the Limit Settings Now press the MY button for about 2 seconds until the motor jogs. ...
How do you program a Shade Motor?
The first step is to initiate programming. Now all motors are shipped in factory mode, which means neither the upper or lower limits have been set. Let’s refer to the limits as the shade stop position. So to initiate programming we’re going to press and hold the up and down buttons simultaneously until the shade jogs.
How long does it take to program a Somfy motor?
As you can see, programming Somfy motors is simple and just takes a few minutes. Check back for additional instructional videos for products such as motorized awnings, rolling shutters and more. For more information and additional details, please vist us at www.somfysystems.com
How do I power a Somfy RTS motor?
Since Somfy RTS motors use the same procedure to learn and forget a transmitter you MUST power only one motor at a time when configuring Somfy channels. Start with having power applied to the motor. Remove the power for 2 seconds. Re-apply power for 10 seconds. Remove the power for 2 seconds. Re-apply power. The shade will begin to move.
How do I set the lower limit or stop point?
To set the lower limit or stop point, press the “my” and up buttons simultaneously. Be sure to press the “my” button slightly before pressing the up button, this will send the shade to the desired upper limit that has been previously programmed. The fifth step is confirming the upper and lower limits, or stop points.
How to change the upper limit on a Somfy RTS?
How to change lower limit on a window?
When to adjust Somfy RTS?
How do you change the lower limit on Somfy?
Steps To Adjust Limits To adjust the lower limit, send the shutter to its current lower limit position by pressing DOWN. Next, press both the UP and DOWN buttons until the motor jogs. Choose the new lower limit position by pressing the UP or DOWN buttons.
How do you program a Somfy RTS motor in less than 5 minutes?
0:236:30How to program a Somfy RTS motor in less than 5 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe up and down button which will put it in the programming mode. So I'm going to press T's at theMoreThe up and down button which will put it in the programming mode. So I'm going to press T's at the same time until the motor response. So there's response by jogging. So it goes up and down shortly.
How do I adjust Somfy?
0:162:43Adjusting Upper and Lower Position of Motorized Roller and Solar ShadesYouTubeStart of suggested clipEnd of suggested clipAllow the shade to reach its preset upper position once the shade stops. Press. And hold up and downMoreAllow the shade to reach its preset upper position once the shade stops. Press. And hold up and down simultaneously until the shade jogs. Which is a brief up-and-down movement of the shade.
How do I change the speed on my somfy shades?
To slow down the speed press the DOWN button until you are happy with the speed of your motorized curtain. To increase the speed, keep pressing the UP button. Once you are happy with your updated drapery speed, press and hold the MY button until the drapery moves back and forth briefly.
How do I put my Somfy in setup mode?
0:004:35Somfy myLink™: Initial Setup and RTS Programming - YouTubeYouTubeStart of suggested clipEnd of suggested clipGo to network settings on your device and connect to the MyLink. Network. Return to the MyLink appMoreGo to network settings on your device and connect to the MyLink. Network. Return to the MyLink app and press the search for my link button for local time and sunset sunrise my link schedules.
What does RTS stand for Somfy?
What is RTS? Radio Technology Somfy® (RTS) is Somfy's own closed control platform with which you can control, operate and expand motorised interior and exterior sunblinds such as awnings, roller shutters, pergola awnings, roller blinds, roman blinds, curtain tracks from anywhere in and around your home.
How do you reset a Somfy motor?
0:572:05How to reset a Somfy RTS motor to the factory settings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's give it a go we'll start with unplugging it for three seconds. So there's one two threeMoreSo let's give it a go we'll start with unplugging it for three seconds. So there's one two three plug it in again for eight seconds.
How do I adjust the sensitivity on my Somfy Wind Sensor?
Adjusting the Sensitivity of your Somfy Motion SensorSlide the housing off the base plate in the direction indicated by the arrow.Use a small FLAT HEAD screw driver to remove the electronics from the housing.Use a small FLAT HEAD screw driver to adjust the sensitivity dial to the desired position.
What is the My button on Somfy remote?
The “my” button acts as a stop button when the window covering is in motion. When the window covering is stationary, the “my” button brings it to the programmed favorite position. Channel LED - All 4 lights will illuminate when fifth channel is activated.
How do you set the limit on a motorized shade?
0:182:21Adjust Upper/Lower Limits on motorized blinds and shadesYouTubeStart of suggested clipEnd of suggested clipYou can adjust as necessary by pressing the up or down button to reach the exact position you desireMoreYou can adjust as necessary by pressing the up or down button to reach the exact position you desire. Press and hold my until the shade jogs. It's as simple as that you're my position is now set.
How do you reprogram a motorized shade?
1:483:48Reset and Reprogram Your Motorized Shades - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress and hold the up and down buttons at the same time to initiate programming the shade will jogMorePress and hold the up and down buttons at the same time to initiate programming the shade will jog which is a brief up-and-down movement of the shade. Then release the buttons.
What frequency does somfy use?
433.42 MHzSomfy module. This module provides a simple interface to control Somfy blinds via an RF transmitter (433.42 MHz).
How do you program a Somfy RTS wall switch?
1:322:25Somfy MyLink Setup and RTS Programming with DecoFlex Wall ...YouTubeStart of suggested clipEnd of suggested clipSelect a channel or channels that operate the product you wish to program in this example the shadeMoreSelect a channel or channels that operate the product you wish to program in this example the shade is on channel 1 press the program button until the shade jogs.
How do I reset my Somfy RTS?
0:572:05How to reset a Somfy RTS motor to the factory settings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's give it a go we'll start with unplugging it for three seconds. So there's one two threeMoreSo let's give it a go we'll start with unplugging it for three seconds. So there's one two three plug it in again for eight seconds.
How can I speed up my Somfy blinds?
Once stopped, press and hold Up, My & Down buttons together until the blind jogs. The blind will start moving Up and Down automatically in cycles. To increase the speed - press and hold the UP button until the blind jogs. The speed will be increased.
How do I program my Somfy gate remote?
0:382:03How to pair a Somfy keygo rts remote control (version without ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress until start flashing quickly and then i press the button that i want to link it to and thereMorePress until start flashing quickly and then i press the button that i want to link it to and there it is the joke from the brother shutter which means that it's working.
Somfy RTS Troubleshooting Guide
113 Hope Road Cranberry Twp. PA 16066 Phone: 866. 683. 1832 Fax: 724. 432. 3387 Web: www. automatedshadeinc.com
SOMFY Remote Control User Manuals Download | ManualsLib
Download 101 SOMFY Remote Control PDF manuals. User manuals, SOMFY Remote Control Operating guides and Service manuals.
Somfy Support & Assistance center
We’re here to help you . Somfy Support & Assistance Somfy will assist you with your project.
Somfy | Motors, Automatisms, Controls & Smart Home Solutions
Somfy | Motors, Automatisms, Controls & Smart Home Solutions
How to change the upper limit on a Somfy RTS?
To Change the Upper Limit: Press UP to send the window covering to its current upper limit. Press and hold both UP and DOWN simultaneously until the treatment jogs. Adjust to a new upper limit position.
How to change lower limit on a window?
To Change the Lower Limit: Press DOWN to send the window covering to its current lower limit. Press and hold both UP and DOWN simultaneously until the treatment jogs. Adjust to a new lower limit position. Press and hold MY/STOP until the treatment jogs to confirm the new limit is set.
When to adjust Somfy RTS?
Most often, this is when you are first installing the treatment or when you’ve temporarily removed it from its location for cleaning and maintenance.
How to reset a Somfy RTS motor?
To reset the motor and pair it with your remote control: Start with having power applied to the motor. Remove the power for 2 seconds. Re-apply power for 10 seconds.
How to reverse a motor?
If incorrect, reverse the motor direction by pressing and holding MY/STOP until the motor jogs.
Can you restore a 110VAC RTS motor?
There are times when you will need to resto re a 110VAC RTS motor to its factory defaults, such as when the motor’s remote control has been lost and needs to be replaced. This article will walk you through resetting the motor to a factory default and, once defaulted, setting the upper and lower limits. To adjust the limits on a motor operating in User mode, see our article “ Adjusting Limits on a Somfy RTS Motor .”
How to change the upper limit on a Somfy RTS?
To Change the Upper Limit: Press UP to send the window covering to its current upper limit. Press and hold both UP and DOWN simultaneously until the treatment jogs. Adjust to a new upper limit position.
How to change lower limit on a window?
To Change the Lower Limit: Press DOWN to send the window covering to its current lower limit. Press and hold both UP and DOWN simultaneously until the treatment jogs. Adjust to a new lower limit position. Press and hold MY/STOP until the treatment jogs to confirm the new limit is set.
When to adjust Somfy RTS?
Most often, this is when you are first installing the treatment or when you’ve temporarily removed it from its location for cleaning and maintenance.
