How many gallons in a 10x30 Intex pool?
I bought one of the 10x30 Intex Summer Escapes pool. I believe it holds about 1000 gallons. I just set it up today and filled it with water. I know nothing about owning pools or spas and the chemicals that go along with it.
How do I set up an Intex easy set pool?
Before you set up a new Intex Easy Set Pool, call your local zoning office to make sure you have all required permits. When you’re ready, find an area of even ground that is free of sticks or rocks and place a tarp where your pool will stand.
How do you treat a 10x30 Intex pool?
How to treat a 10x30 Intex Summer Escapes pool? Now you'll probably want to use liquid chlorine, or shock as some call it as your sanitizer , although there are several others out there as well. Liquid chlorine gets into the water immediately without having to dissolve.
How do you set up an inground pool on the ground?
Lay out the pool and tarp. Before setting out the pool, it is a good idea to lay a tarp on the ground first, below where the pool will sit. This will help to protect against punctures and tears. Unfold the pool atop this tarp, centering it as much as possible and smoothing it out.
How do you level a 10x30 pool?
1:466:13Intex 10x30 Pool - Leveling The Ground And Setting Up ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd knocked down the high spots by scraping back and forth across the area as a way to fill in someMoreAnd knocked down the high spots by scraping back and forth across the area as a way to fill in some of the smaller. Low areas while knocking down some of the high spots.
How much water does a 10x30 pool hold?
Water capacity: (80%) 1,018 Gal.
How much water do I put in my Intex 10x30 pool?
Water capacity is 1,185 gallons (90%) and it is ready for water in 30 minutes.
How level does the ground need to be for an Intex pool?
Walk on the 2×4 to make sure it's flat on the ground. Place a carpenter's level on the two-by-four, to be sure the ground is not more than 1 inch out of level. Move the two-by-four around the stake to measure all around the pool circumference, and also measure at a few different places around the outer perimeter.
How many chlorine tablets do you put in a 10ft pool?
Number of Chlorine Tablets for Intex PoolsIntex Pools (Types & Sizes)Water Capacity3 Inch Chlorine Tablets Needed10 ft X 30 in Easy Set Pool Set1,018 gal (3,854 L)1/410 ft X 30 in Easy Set Pool1,018 gal (3,854 L)1/48 ft X 30 in Easy Set Pool639 gal (2,419 L)1/46 ft X 20 in Easy Set Pool232 gal (878 L)1/473 more rows
How much does a 10x30 pool weigh?
Product informationBrandViecamProduct Dimensions120"L x 120"W x 30"HProduct Dimensions16 x 13 x 5.5 inchesItem Weight17.76 poundsManufacturerViecam8 more rows
How often should I run the pump on my Intex pool?
Run your filter pump for at least 12 hours a day, every day. This will make sure all the water in your pool circulates at least once. In an ideal world of bottomless money vaults, you could run your pool pump 24 hours a day, but 12 hours is a good compromise.
How many hours a day should I run my Intex pool filter?
0:084:59How Long Should I Run My Intex Filter Pump + Monthly Winners - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the short answer is two or three hours a day should really be enough but depending on yourMoreSo the short answer is two or three hours a day should really be enough but depending on your circumstances.
How long should I run my Intex pool pump each day?
During the highest of summer temperatures, run the filter pump for at least eight hours per day. In warmer climates you will find yourself needing to add more chlorine to meet demands because it dissipates faster in warm weather. The pool chemicals need to circulate, which is why the filter pump must run for that long.
Should you put a tarp under your pool?
Materials like Visqueen, tarps, and pearlite can trap moisture and eventually cause the pool's wall to corrode. Any material that can trap moisture should not go under a pool liner.
What is the easiest way to level a ground for a pool?
STEP 1: Determine your location and remove any large rocks or debris. ... STEP 2: Place 2x4s on the site and place a level on top. ... STEP 3: Add or take away soil until the ground is level. ... STEP 4: Repeat the process until the entire area is flat. ... STEP 5: Rake any remaining rocks or debris and tamp the ground.More items...•
What happens if a pool is not level?
The pool will twist, buckle, or even collapse, causing property damage and injury to anyone in or around the pool. Also, the inflatable ring pools are more likely to fold under the force and blow out causing major damage and a safety hazard. Even the most well-constructed pool can fail if the leveling is off.
How many gallons in Summer Waves 10x30 pool?
It comes with a filter pump, type I filter cartridge, and repair patch. The whole thing can set up in as little as 30-minutes, and with its durable steel and PVC design, it handles up to 1,266 Gal. of water and as much fun as you can throw at it.
How many gallons is a 10x30 metal pool?
10 feet x 30 inches Metal Frame Pool Set with 330 gallon filter pump, 110-120 voltage DFCI, DVD beautiful, easy-to-assemble, durable and designed for years of family and neighborhood fun. Ready for water in 30 minutes. Water capacity (90 percent full): 1,185 gallons.
How many Litres is an Intex 10x30 pool?
4,485 litersIntex 28202UK 10ft x 30in Metal Frame Swimming Pool with Filter Pump, 4,485 liters, Blue, 305x76 cm.
How many Litres is a 10 foot by 30 inch pool?
3,853 litresPool water capacity at 80% full: 848 gallons (3,853 litres). Size: Diameter 10 feet (305cm), Height 30 inches (76cm).
How long does it take to fill a pool with water?from intexcorp.com
Ground cloth, pool cover and pool ladder are also included. Ready for water in 30 minutes, simply spread out on level ground, inflate the top ring, fill the pool with water, and enjoy the fun. Constructed with puncture-resistant 3-ply material.
Is Intex Recreation Corp. safe?from intexcorp.com
Intex Recreation Corp. is dedicated to the safe use of all of its products. While all accidents cannot be prevented, practicing good safety habits, setting and following rules, carefully reading instruction manuals, and vigilant supervision can greatly reduce the likelihood of injury as well as reduce injury severity. Please take the time to review the following information, and make use of the link provided, to assist in keeping you and your family safe from injury.
What to do before setting up a pool?
Before you set anything on the ground, clear the area of any rocks, sticks, twigs, or sharp objects that could puncture the pool . Bermuda, St. Augustine, and other types of hardy grass are capable of growing up through your pool liner and ground cloth over time.
How big is an Intex pool?
Size up the selection. Intex offers a variety of Easy Set pools, from 6’ x 20” kiddie pools to 18’ x 48” monsters which require ladder entry. The size you choose will be contingent on both the needs of likely swimmers and the space you have available, so we should probably take a walk around your yard and see what’s possible.
How does a pool pump suction fit?
Suction fittings are pushed through the pool liner and seal themselves through a sleeve that jets through to the outside of the pool. Then the suction hose from the pool pump fits over this sleeve and clamps down tightly with a power clamp.
What to do if your Intex pool box is missing?
If your box is missing anything, exchange it at the store where you purchased it for another pool or contact Intex to order replacement parts. The boxes of every size of pool should at least contain the Intex pool set, the pump, a filter, and an owner’s manual.
How to protect a pool from punctures?
Lay out the pool and tarp. Before setting out the pool, it is a good idea to lay a tarp on the ground first, below where the pool will sit. This will help to protect against punctures and tears. Unfold the pool atop this tarp, centering it as much as possible and smooth ing it out . The blue inflatable ring should be facing up, in as circular a shape as can be managed.
How deep is a kiddie pool?
So the aforementioned kiddie pool is six feet wide and twenty inches (four inches shy of two feet) deep.
How long does it take to stabilize chlorine in a pool?
Begin treatment. Immediately after purchasing your pool, stabilized chlorine tablets will be sufficient. For a few weeks, simply add one tablet into the water (or as many as the specific product recommends) and replace it once it’s totally dissolved.
Quick Set Ring Pools
Summer Fun is here with the easy and convenient Quick Set Ring Pool. Designed with an inflatable top ring, the pool rises as it fills for quick and effortless setup.
Quick, Easy, and Long, Lasting Summer Fun
Easy set-up and ready for water in 10 minutes, just inflate top ring and fill
Help! Have a 10x30 Intex pool. How do I care for it
We bought the 10x30 Intex pool @ Walmart. It's set up, filled with water, been swimming in it for a week. Water staring to look cloudy. We don't have a test kit and don't know how to care for it. Only thing we been doing is shocking it every night and running the filter for 2hrs. Well, needless to say it's failing.
Re: Help! Have a 10x30 Intex pool. How do I care for it
Hi and welcome to the Pool Forum! What kind of shock have you been using ---- dichlor or cal-hypo? Do you have a test kit? What is the source of your fill water --- a well or city water? Have you put anything else in the water other than the shock? Repost with the requested info and I think somebody here can help you get this pool going correctly!
Re: Help! Have a 10x30 Intex pool. How do I care for it
We normally would recommend adding some muriatic acid to lower pH. But, if you will use the dichlor in the recipe that Ben linked above, it may lower your pH enough that you won't need the acid since dichlor is acidic. It would be a good choice for your new fill as it will add chlorine and needed CYA. For today, go ahead and use bleach.
What happens if you run out of chlorine in your pool?
If you run out of chlorine in the pool for even one day, algae will begin to grow and it's much easier to keep it from growing than it is to try and get rid of it.
Can you run a pool filter with a cover on?
Yes, you can run the filter with the cover on as long as the cover isn't loose enough to be sucked in to the pump suction port. I normally recommend running 24/7 on smaller pools like that as they are harder to keep the chemicals balanced due to a smaller body of water that changes quickly with swimmer load. Customer:
