How To Assemble the PetSafe® Drinkwell® Pagoda Pet Fountain 1 Place the foam filter on top of the square in the bowl of the fountain. 2 Set the pump in the foam filter and run the cord down the stem and out the bottom. 3 Fold the rubber cap over the stem, allowing the cord to sit in the notch at the bottom of the cap. 4
How do you fill a water fountain for dogs?
Fill the bowl with water to the fill line. Plug in the fountain. Watch your pet enjoy the fresh, flowing water! Keep the water level close to the fill line at all times to prolong the life of the pump. How often should I clean the fountain?
How do I set up my Drinkwell® platinum pet fountain?
Drinkwell® Platinum Pet Fountain Set Up 1 Welcome. 2 A few things to keep in mind:. The acclimation time may vary with each pet. The sound of falling water triggers... 3 Preparation. 4 Step 1. Clean the fountain at least once a month to avoid mineral buildup. Multi-pet households may need to clean more... More ...
How do pet water fountains work?
The filtration system forces water through a carbon filter that removes toxins, particles, bad tastes and odors to provide clean drinking water for your pet. Clean the fountain before first use. Have the following ready to assemble your pet’s new fountain: Clean the fountain at least once a month to avoid mineral buildup.
How do you use the carbon filter on a pet water fountain?
The carbon is made from coconut shells and is safe for your pet. Insert the filter into the filter housing with the black side facing forward and the narrow side down. Run the pump cord through the hole and under the fountain. Use suction cups on the pump and guides on the bowl to align pump in bowl.
How to get my dog to acclimate to the fountain?
How to remove impeller from a pump?
How often should I clean a pet fountain?
How to insert a filter in a filter housing?
Why is circulating water important?
Where to place lid on filter?
Is a water fountain dishwasher safe?
See 2 more
How do you set up a drinkwell Original Pet Fountain?
0:001:14Drinkwell® Pet Fountains - A constant source of wellbeing for ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIdeally. On a mat and away from their food bowl and litter tray. Top up the reservoir with fresh tapMoreIdeally. On a mat and away from their food bowl and litter tray. Top up the reservoir with fresh tap water. Now just plug into a socket. You can change the flow rate to suit your pet.
Which way does the filter go in a drinkwell pet fountain?
The carbon is made from coconut shells and is safe for your pet. Insert the filter into the filter housing with the black side facing forward and the narrow side down.
How do you set up a drinkwell pet fountain mini?
Assemble the fountain and filter according to the instructions.Fill the bowl with water to the fill line.Plug in the fountain.Watch your pet enjoy the fresh, flowing water!Keep the water level close to the fill line at all times to prolong the life of the pump.
How do you set up a drinkwell 360 Pet Fountain?
Assemble the fountain The pump cord runs underneath a notch in the tower. Attach the intake tube to the holder. Attach the intake tube holder to the stem in the bowl, then attach the tube to the hole on top of the pump. Run the pump cord down the stem.
Which way does the filter face in the drinkwell mini?
The filter will fit into the two triangular slots located on the right side of the housing. The filter fits narrow side down and the white side faces the front of the fountain.
How do you install drinkwell filters?
0:221:14How to Replace Your Drinkwell Pet Fountain Charcoal Filter - YouTubeYouTubeStart of suggested clipEnd of suggested clipGrab your theme crucial branded filter replacement take out one filter and place it into theMoreGrab your theme crucial branded filter replacement take out one filter and place it into the fountain on a diagonal. And close the top you should change your filters.
How do you use petsafe drinkwell?
Assemble the fountain and filter according to the instructions.Fill the bowl with water to the fill line.Plug in the fountain.Watch your pet enjoy the fresh, flowing water!Keep the water level close to the fill line at all times to prolong the life of the pump.
Why is my pet fountain not working?
Clean your pump Oftentimes, if your fountain has reduced water flow or has stopped working, your pump simply needs to be disassembled and thoroughly cleaned. Different fountains come with different pumps, however, the cleaning steps remain the same. We recommend cleaning the pump every 2-4 weeks.
Why is my drinkwell Platinum not working?
Unplug the fountain then plug it back in. If the motor is humming, try cleaning the motor, making sure nothing is stuck around the impeller. You can also change the foam filter. If the motor is not humming, try replacing the pump.
Why is my fountain pump not working?
Your pump can't push water if it doesn't have access to it. First, check to see if there is anything keeping water from getting to the pump, be it a large rock or debris, leaves, a clogged skimmer net or opening, a jammed skimmer flap, or just a skimmer mat that has gone too long between cleanings.
Where does the pump go in a fountain?
The pump goes in the reservoir, or, in a two-pump fountain, in the reservoir and the top basin. It may or may not be encased in a filter box, which -- just like the filter in a swimming pool -- helps keep out debris.
How do you set up a fountain?
How to Install an Outdoor FountainStep One: Choose Your Fountain Location. ... Step Two: Select Your Fountain. ... Step Three: Mark the Area for Excavation. ... Step Four: Dig the Hole. ... Step Five: Level the Basin. ... Step Six: Connect the Pump and Plumbing. ... Step Seven: Add Lighting. ... Step Eight: Add Decorative Gravel.More items...•
How do you put a filter in a drinkwell mini fountain?
Insert the filter diagonally with the black side facing the front and the narrow side facing down. Pick up the fountain by the bowl, and place it in the desired location. Pour water into the bowl. Make sure the electrical power cord, the adapter, and your hands are completely dry.
How does filter go in drinkwell platinum?
5:426:50Drinkwell Platinum Pet Fountain Unboxing - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay so the filter goes in that in the top of the housing here so that part is just a little there'sMoreOkay so the filter goes in that in the top of the housing here so that part is just a little there's a groove there. And a groove there and that's where the filter goes but I want to make sure I've
How do I change the filter on my drinkwell 360?
0:411:38Replacing Your Drinkwell Charcoal Filters For Multi-Pet & 360 Pet ...YouTubeStart of suggested clipEnd of suggested clipTo change the filter. First remove the top cap by twisting and lifting. Next twist counterclockwiseMoreTo change the filter. First remove the top cap by twisting and lifting. Next twist counterclockwise and spout will come off there's your filter grab. It by the handle. And lift it. Out.
Which way do charcoal filters go?
Carbon filters, unlike HEPA filters, do not have a specific orientation they must be fitted into an air purifier. They can be placed either way round and their effectiveness at filtering VOCs and other chemicals will be the same.
DRINKWELL PLATINUM OPERATING INSTRUCTIONS MANUAL Pdf Download
Page 2 DRINKWELL ® Platinum U.S. Patents No. 5,799,609 and 5,842,437 OPERATING INSTRUCTIONS D O N O T R U N D R Y FOR INDOOR USE ONLY Your fountain will come fully assembled and ready for use. 1) As with any electrical device, check the electrical cord for any tears, or damage before use.
How to get my dog to acclimate to the fountain?
If your pet is hesitant, try the tips below to help your pet become acclimated. Unplug the fountain for the first few days. Your pet may be intimidated by the running water. Add a small amount of broth to the water to help attract your pet to the fountain. PWW00-13703.
How to remove impeller from a pump?
Remove the impeller by pulling up from underneath the white disk. Note: The impeller is held in place by a magnet. This may give some resistance when trying to remove. Clean all parts of the pump with soap, warm water and a small brush.
How often should I clean a pet fountain?
Clean the fountain at least once a month to avoid mineral buildup. Multi-pet households may need to clean more frequently. It is recommended to clean the pump and change the filters when cleaning the fountain.
How to insert a filter in a filter housing?
Insert the filter into the filter housing with the black side facing forward and the narrow side down.
Why is circulating water important?
The circulating water helps prevent mineral build up.
Where to place lid on filter?
Place the lid on top of the filter housing.
Is a water fountain dishwasher safe?
The fountain is dishwasher safe on the top rack only. Do not wash the pump or filters in the dishwasher. Remove all parts of the fountain as shown below and clean using soap and warm water. If hard water buildup occurs, soak pump in equal parts vinegar and warm water for 15 minutes, then scrub. Lift up on the lid.
How does a charcoal filter work?
The charcoal filter removes bad tastes and odors from the water and catches large particles and debris from re-circulating back into the water. Over time, debris gets stuck in the outer fabric of the filter, making it more difficult for the water to pass through it. The inner part of the filter contains granulated carbon with hundreds or thousands of microscopic holes, which bind to impurities in the water that cause bad tastes and smells. This binding prevents impurities them from returning to the water. Eventually, the holes become clogged and can no longer remove impurities.
Why does my water fountain stop working?
There are several possible causes for a fountain to stop working. Sometimes it takes a few minutes for the motor to start pumping water once it's refilled or plugged in. If water doesn't flow after 5 minutes, try these troubleshooting tips: Unplug and re-plug the fountain into the same outlet.
How to clean a fountain motor?
Pour soapy water inside the motor cavity and clean with a small round brush like the one found in the Fountain Cleaning Kit. A cotton swab or small toothbrush might work too, or anything that can reach all the way inside of the cavity. 8. Rinse all parts well before returning to the fountain.
How to clean a water fountain?
1. Unplug the fountain. 2. Empty the dish of water. 3. Disassemble the fountain. 4. The fountain is dishwasher safe except for the motor and cord. Either wash it in the top rack of your dishwasher or hand-wash these parts.
How to get my dog to use a fountain?
Here are a few tips to help encourage your pet to use the fountain. Set up the fountain without plugging it in. This way your pet can get used to drinking from the fountain without the noise and splash of running water. Plug in the fountain for short periods of time, until your pets begin to feel comfortable.
Why does my dog's fountain feel slimy?
If you have multiple pets or dogs use the fountain, the slimy feeling may be caused by your pet's saliva. Change the water and clean your fountain more frequently to prevent this.
Why does water spill around a fountain?
Sometimes water around the fountain is caused by pets drinking. Some pets are prone to spilling. Watch your pet when he drinks to see if this is the cause. If it is, you can purchase a fountain mat or other water-resistant mat to place under the fountain.
How to clean a motor impeller?
There may be a faceplate cover over the impeller than can be pulled up with a coin or fingernail. Wash the impeller in soapy water, removing hair and other gunk that has collected around it.
How to clean a fountain that has a white chalky substance?
Be sure to rinse every part thoroughly before re-assembling the fountain. If there is a white chalky substance in the fountain, your fountain may have a mineral deposit build-up from hard water. To remove these deposits, clean the fountain parts with a 90% water, 10% vinegar solution.
What happens if you use a fountain outside?
If you have used your fountain outside, the pump may need to be replaced. If the pump was exposed to low water levels for a prolonged period of time, the pump's motor may have burned out and the pump may need to be replaced. To prevent this, always keep your fountain water above the fill line. Close.
How to get my dog used to drinking from a fountain?
This way your pet can get used to drinking from the fountain without the noise and splash of running water. Plug in the fountain for short periods of time, until your pets begin to feel comfortable . Try setting it to a lower flow setting. Once your pet is somewhat used to the fountain , remove other water sources.
Why does my water fountain feel slimy?
The fountain feels slimy. If you have multiple pets or dogs use the fountain, the slimy feeling may be caused by your pet's saliva. Change the water and clean your fountain more frequently to prevent this. Make sure the fountain parts are rinsed thoroughly after cleaning the fountain.
Why does water spill around a fountain?
Sometimes water around the fountain is caused by pets drinking. Some pets are prone to spilling. Watch your pet when he drinks to see if this is the cause. If it is, you can purchase a fountain mat or other water-resistant mat to place under the fountain.
What to do if your fountain is leaking?
If you find a leak, you can attempt to patch it or call Customer Care about replacing the fountain. If the cord is wet above the water line, loosen the cord and allow some slack so water won't travel up the cord. If you have the Original fountain, you may need to remove the pump to properly clean around it. Close.
How to get my dog to acclimate to the fountain?
If your pet is hesitant, try the tips below to help your pet become acclimated. Unplug the fountain for the first few days. Your pet may be intimidated by the running water. Add a small amount of broth to the water to help attract your pet to the fountain. PWW00-13703.
How to remove impeller from a pump?
Remove the impeller by pulling up from underneath the white disk. Note: The impeller is held in place by a magnet. This may give some resistance when trying to remove. Clean all parts of the pump with soap, warm water and a small brush.
How often should I clean a pet fountain?
Clean the fountain at least once a month to avoid mineral buildup. Multi-pet households may need to clean more frequently. It is recommended to clean the pump and change the filters when cleaning the fountain.
How to insert a filter in a filter housing?
Insert the filter into the filter housing with the black side facing forward and the narrow side down.
Why is circulating water important?
The circulating water helps prevent mineral build up.
Where to place lid on filter?
Place the lid on top of the filter housing.
Is a water fountain dishwasher safe?
The fountain is dishwasher safe on the top rack only. Do not wash the pump or filters in the dishwasher. Remove all parts of the fountain as shown below and clean using soap and warm water. If hard water buildup occurs, soak pump in equal parts vinegar and warm water for 15 minutes, then scrub. Lift up on the lid.
