Cut open with a seam-ripper. Then, sew the button onto the front of the pouch, underneath your button hole. Use a doubled thread and hand needle, and sew through each hole twice (I like to criss-cross diagonally when sewing on a button). Knot on the inside of the bag.
How do you sew a buttonhole?
To sew a button, first thread a needle and tie a knot at the end of the thread. Place the button on the fabric where you want to sew it, making sure it’s lined up with the corresponding button hole. Then, bring the needle and thread up through one of the holes in the button.
How to sew a button on a shirt?
Method 1. 1. Choose your button and thread. Select a suitable button and thread that matches the button, the garment, and any thread used to sew on other ... 2. Thread the needle. Simply pull the thread through the needle so that there is an equal length of thread extending from both sides. 3. Tie a ...
How to sew a button and thread together?
Choose your button and thread. Select a suitable button and thread that matches the button, the garment, and any thread used to sew on other buttons. If you like, you can double the thread to make this job quicker.
How do you fix a button that won’t sew?
Cut off the excess. Choose what you will use. Select a suitable button and thread that matches the button, the garment, and any thread used to sew on other buttons. Thread the needle. If you like, you can double the thread to make this job quicker.
How do you sew a button onto a bag?
0:201:16How to Sew a Messenger Bag : Button Placement for Sewing A ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the next clip what we're going to do is. I'm going to show you how to sew this button on andMoreSo the next clip what we're going to do is. I'm going to show you how to sew this button on and anchor it on there real nice and and have it and kind of keep it away from the bag itself.
How do you make a button closure on a purse?
7:4614:04Coin Purse II Die Button Closure Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow place your button loop at the top center of your coin purse and you're just going to eyeballMoreNow place your button loop at the top center of your coin purse and you're just going to eyeball this there's four holes in the button loop and they should line up with the holes in the coin purse.
How do you sew on a button for beginners?
2:184:36How To Sew On A Button | Quick & Easy Sewing By Hand - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou will go through all the buttonholes. Approximately. Six times pull the nail through the back ofMoreYou will go through all the buttonholes. Approximately. Six times pull the nail through the back of the feather. Once that is done you can now remove the spacer needle as it's time to form the shank.
How do you sew a 4 hole button by hand?
2:006:16How to: Sew on a BUTTON by Hand | Easy Tutorial for Beginners - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I bring my needle up through the top right hole first. And then down through the bottom left holeMoreSo I bring my needle up through the top right hole first. And then down through the bottom left hole. Continue to try and keep the holes in the button lined up with the cross. Underneath.
How do you put a closure on a tote bag?
0:063:46Adding a Magnetic Closure to a Handbag : Handbag DesignYouTubeStart of suggested clipEnd of suggested clipInside out so we can mark where we want our snap to go. Now I want my snap to go right in the centerMoreInside out so we can mark where we want our snap to go. Now I want my snap to go right in the center. So I'm going to measure from the side seams to the center. And get my center. Point.
How do you sew a button closure?
0:023:55How To Sew A Thread Loop Button Closure Quick Tips With CinnamonYouTubeStart of suggested clipEnd of suggested clipAnd then right up. Out the top. So you can see that right there we have it going inside betweenMoreAnd then right up. Out the top. So you can see that right there we have it going inside between these two pieces of fabric. And pull that until the knot is secure on the back. Side.
How do you sew a 2 hole button?
0:532:44Sewing a Two Hole Button - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst line of stitching. Place a toothpick another pin a safety pin a piece of a paper clip. And putMoreFirst line of stitching. Place a toothpick another pin a safety pin a piece of a paper clip. And put that on the outside of the thread.
How do you sew a button like a professional?
3:558:43How to Sew a Button Like a Pro - YouTubeYouTubeStart of suggested clipEnd of suggested clipGo that tight do that a second. Time. So needle goes through sideways underneath. Pull tight to thatMoreGo that tight do that a second. Time. So needle goes through sideways underneath. Pull tight to that loop forms. And put your needle through the loop. And pull tight.
How do you sew a single hole button?
Just follow these steps:Double your thread and tie a knot at the ends. ... Position your button in line with the button hole.Push your needle and thread through the underside of the fabric until it stops at the knot.Pass the needle through one button hole and then the other.More items...•
How do you attach a 4 hole button?
Coming from underneath the fabric and the button, poke your needle up through one of the holes. Pull the thread through the fabric until it is tight. Diagonally across from the first hole you put the thread through, poke your needle down into this hole. Pull the thread tight through the backside of the fabric.
How do you sew a 4 hole button on a sewing machine?
0:051:28Button Sewing Foot - Sewing on four-hole buttons - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe rubber extensions hold your button while it is being sewn. On when the back two holes areMoreThe rubber extensions hold your button while it is being sewn. On when the back two holes are stitched raise the needle move the button forward to sew in the front set of holes.
How do you sew a button on a stuffed animal?
0:474:24How to sew a Button (Craft Basic Sewing) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you've got the button on now you go to the opposite hole. And you push through to the back. AndMoreSo you've got the button on now you go to the opposite hole. And you push through to the back. And make sure it's all tied so i've got the first stitch in place. Now you repeat.
How do you sew a button on a shirt by hand?
0:582:02How to Sew a Button by Hand - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep 5 take a pin or a toothpick and Center it on top of the button for now hold the pin in placeMoreStep 5 take a pin or a toothpick and Center it on top of the button for now hold the pin in place with your finger. This will create space between the button and the fabric.
How do you sew a 4 hole button on a sewing machine?
0:051:28Button Sewing Foot - Sewing on four-hole buttons - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe rubber extensions hold your button while it is being sewn. On when the back two holes areMoreThe rubber extensions hold your button while it is being sewn. On when the back two holes are stitched raise the needle move the button forward to sew in the front set of holes.
How do you sew a button with a loop on the back?
0:192:44Sewing Back Loop Buttons - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd sometimes you just have to hold the button and let it slide down and just pull it a little bitMoreAnd sometimes you just have to hold the button and let it slide down and just pull it a little bit there we go now i'm going to sew about three loops around this i always find three to be good.
Do sewing machines sew on buttons?
Sewing on buttons with a sewing machine still surprises people to this day. Yes, you can sew buttons on with a sewing machine. Sewing buttons on by “H-A-N-D” is sometimes referred to as a four-lettered word. And some people just throw away perfectly good clothes that have had a button mishap without thinking twice.
How to sew a button on a shirt?
1. Choose your button and thread. Select a suitable button and thread that matches the button, the garment, and any thread used to sew on other buttons. If you like, you can double the thread to make this job quicker. 2.
How to tie a button?
One way to tie a knot is to wrap the thread around your finger as shown, roll the thread between your fingers, and pull it tight. If you doubled the thread, tie the ends together. Leave a long tail of thread, whether you are doubling the thread or using a single thread to sew the button.
How to knot a thread at the end of a stitch?
Another way to knot the thread at the end is to take a tiny stitch on the wrong side, pull it almost down to the fabric, and then put the threaded needle through the loop before pulling it tight. If you do this twice in the same spot, that is a double-knotted thread. Then you can cut off the thread close to the knot.
How to leave a shank on a button?
Leave a "shank" by leaving the stitches loose and placing a large safety pin behind the button parallel with the fabric as you sew. Make sure you use strong thread, such as buttonhole thread. Make many passes with the thread, It will have many strands in the space between the button and the safety pin.
How to make a button with a straight pin?
Place a straight pin. Place a straight pin beneath the button, between the stitch you have made and where the next stitch will go, in order to keep the button from being stitched too tight. 7. Push the needle down through the opposite hole and through the fabric. Pull the thread all the way through. 8.
How to tie a knot with a double thread?
One way to tie a knot is to wrap the thread around your finger as shown, roll the thread between your fingers, and pull it tight. If you doubled the thread, tie the ends together. Leave a long tail of thread, whether you are doubling the thread or using a single thread to sew the button. 4.
How to Sew on a Button
Take off the garment if possible, although in my story above I simply performed the procedure in front of a public restroom mirror. If working on your front trouser button, find a bathroom stall.
Step 1: Thread the Needle & Knot the End
How much thread do you have? If you have 24 inches go ahead and “double over,” which means sliding the thread through the eye of the needle and then doubling it over until you have equal amounts on either side. You want at least 12 inches to work with.
Step 3: Position the Button
Put the button on the anchor “X” and begin sewing by pushing the needle from the back to the front through the first button hole. At this point you want to add the spacer (a second needle or a toothpick, pin, or small stick can be used).
Step 4: Create the Shank
On your last repetition of the previous step, come back up through the fabric but not through the button. Come up like you were going to go through the usual hole in the button, but turn the needle aside and bring it out from underneath the button.
Step 5: Tie It Off
Make a small knot on the back side of the fabric. You can use the needle to guide the thread through a knot or you can snip the thread off the needle and tie the knot in the slack with your fingers, but either way you want it snug up against the back of the fabric.
Step 1: Print the Pattern and Cut It Out
Print the pattern (provided as a PDF) at 100%, tape together the pages to make continuous, then cut out pieces. Using an exacto knife and ruler makes this super easy, but scissors work fine too!
Step 2: Cut Out the Fabric Pieces
Pin the paper pattern onto your material, then cut around to get the pieces. You should have two rectangles and two pentagons.
Step 3: Pin First Two Seams
Pin the corresponding pieces right sides together. For the house-shaped pieces, pin along the "roof" sides, and for the rectangles pin along one long side.
Step 4: Sew First Two Seams
Begin sewing using a straight stitch (on my machine, a Janome, that's stitch B with a stitch length of approximately 3 and tension around 4) with about a 3/8" seam allowance. After a few stitches, use the reverse button to stitch back over your first few stitches, then continue straight for the remainder of the seam.
Step 5: Turn Inside Out and Iron
To help the corner, you can cut close to the stitching as pictured, Then, turn inside out and iron the seams flat. Turn your rectangular pieces right side out and iron along the long-side seam you just made.
Step 6: Sew and Flip--you're Almost There!
Pin the rectangle to the house-shaped pieces, perpendicular to the edges. Sew along these three sides, backstitching at the beginning and end to reinforce the start and turning at the corners as before.
Step 7: Buttonhole: Part 1
Choose your button and mark as shown in the image, with a pencil. Make the lines long enough to see around the presser foot.
BEFORE YOU BEGIN
When reattaching a button, it’s best to use the button that came with the garment. If you have the button that fell off, keep it in a safe place until you can sew it back on. Many clothing items come with extra buttons—it’s worth saving these pieces in case a button comes off.
STEP 1: Thread the needle and tie a knot at the end
Measure out the amount of thread needed, which is roughly around 24 inches long. Insert the thread through the eye of the needle and double it over until there are equal lengths of thread on each side. Many sewing kits come with threaders to help fit the thread into the eye.
STEP 3: Attach the button
Position the button on the “X.” Begin sewing the button to the garment by pushing the needle through the fabric from behind the button and through the first button hole. Place a spacer (this can be a second sewing needle, a toothpick, or a small pin) across the four button holes.
STEP 4: Create a shank
After attaching the button, make one more pass through the fabric, but avoid going into a button hole, bringing out the needle from underneath the button instead. Remove the spacer and create a shank by wrapping the thread around the bundle of threads underneath the button. Six wraps will do the trick to create a sturdy shank.
STEP 5: Tie off the thread
Knot the thread on the back side of the fabric, keeping it as snug to the fabric as possible. Tying off on the back of the fabric keeps the front looking neat and presentable. An overhand loop is the simplest knot type for tying off.
Final Thoughts
Buttons fall off sometimes, but repairs are easy if you know how to sew a button on pants, shirts, skirts, or other clothing. It only takes a few minutes to reattach a button, and you’ll save the money that would have otherwise been spent on a tailor or replacement garment.