- You need to choose the right width of the elastic that you need to insert 1” wide braided elastic is the ideal width for an elastic.
- Now you need to make a casing that can completely house the elastic. ...
- Take the draw pattern and measure it from the waistline to draw the line. Follow the same guidelines to create the back piece as well.
- Now cut out the marked pieces and sew the sides of the garment together. ...
- Press down the raw edges of the fabric under 3/8” or general seam allowance.
- Place the pins in place for stitching marks. Start stitching at the lower edge of the waistband casing, leaving a 2” opening to insert the elastic.
- Now take your elastic and tie a safety pin to one end of the elastic. Start pulling through the casing and take the end from the other hole.
- Place one end of the elastic on the other and stitch it together, creating a box pattern. ...
- Now gently pull the waistband fabric in order to allow the elastic to set inside the casing. ...
- To further prevent the twisting and turning in the future, you can stitch layers in the side of the seams.
How do you sew a zig zag waistband?
Change the stitch to zig zag stitch in your machine. Stitch the elastic along the seamline (do not extend over the seam edge); You will have to stretch the elastic to adjust the elastic to the fabric. Flip the waistband fabric strip over the elastic to the inside of the garment.
How do you sew a waistband to a skirt?
You can sew over the elastic using a ballpoint needle – stitch parallel rows of topstitching through the fabric and the elastic – this top stitching looks attractive, and securely attaches the elastic. You can see the tutorial for a long flared skirt for a detailed explanation of this type of elastic waistband.
How do you make a waistband out of elastic?
Add 1 inch seam allowance. Stitch the ends of the elastic piece together making an elastic tube. Make an X in your stitching to make sure the stitching is strong enough. Divide the waistband/top edge and elastic into four sections.
How to sew a channeled waistband?
To sew a channeled waistband for the pants and skirts, make 3 or more such channels on a turned under casing. Insert 1/4 inch elastic through each of the three casing that you have made.
How do you sew a waist casing?
How to Sew an Elastic Waistband with a CasingMake sure enough seam allowance at the top is added for the casing.Press the top raw edge over by ¼ inch (6mm).Press the top edge over again by the width of the elastic plus ¼ inch (6mm). ... Stitch around the casing close to the edge leaving a gap on one side.More items...
How do you sew a casing on pants?
0:504:52Teach Yourself to Sew: How to Sew Casings for Elastic & DrawstringsYouTubeStart of suggested clipEnd of suggested clipThis is just one way to make a casing sometimes the casing is a separate waistband. But on this pantMoreThis is just one way to make a casing sometimes the casing is a separate waistband. But on this pant the casing is attached to the top of the pants. And is what we call a cut on casing.
How do you sew an elastic casing?
0:275:01Sewing an Elastic Casing - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you get the top edge of your waistline. You're going to press a fold of one centimeter 5/8 of anMoreSo you get the top edge of your waistline. You're going to press a fold of one centimeter 5/8 of an inch. And then you're going to press another fold which will be the width of your elastic.
What is waistband casing?
The casing is the “tunnel” that holds elastic in the sewn garment, whereas cut-on waistbands are folded down and topstitched from the right side.
What is casing on sewing pattern?
A Casing in sewing is a cover that is created to enclose something like elastic or a ribbon. You might use a casing on a bag to enclose the ribbon or tie that is used to close the bag.
How do you cover an elastic waistband?
0:486:15How to Sew an Exposed Elastic Waistband - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress your seam open with either a low heat iron or you can just finger.MorePress your seam open with either a low heat iron or you can just finger.
What is a casing seam?
A casing is a fabric tunnel, typically around the waistline, made to enclose a drawstring or elastic.
How do you run elastic through casing?
0:033:05Tools & Tips for Threading Elastic Casings - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert the safety pin into the channel opening. Then scrunch the fabric around it and slide theMoreInsert the safety pin into the channel opening. Then scrunch the fabric around it and slide the safety pin forward through the channel. If your threading elastic.
How wide should the elastic be for a finished casing?
The width of your casing should be about 1/4 inch wider than your elastic band, so I'm going to do a casing that is 3/4 inches. At the opening of your bag with wrong side out, measure the width of your elastic casing and press it down all around the bag.
How do you make a skirt casing?
0:245:19How to Stitch a Skirt: 4/4 The Casing | Sewing - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by pulling out the free end of the waistband from the skirt and place the strip of elastic cutMoreStart by pulling out the free end of the waistband from the skirt and place the strip of elastic cut óleo inside of it as shown. Now make a half inch fold with the raw end of the waistband.
How do you sew an elastic waistband without casing?
2:225:41Sewing an Elastic Waistband with No Casing - YouTubeYouTubeStart of suggested clipEnd of suggested clipAs I'm working with a fib a stretch fabric. Remember. That is placed into position it's just a caseMoreAs I'm working with a fib a stretch fabric. Remember. That is placed into position it's just a case of me taking it over to my sewing machine and sew in that into place I'm using a ballpoint needle.
How do you sew a zipper on pants?
0:2934:05How To Sew a Zipper Into Pants - Detailed Tutorial for BeginnersYouTubeStart of suggested clipEnd of suggested clipNow the first thing I always do when I'm putting in a zipper is I interface my fly facing firstMoreNow the first thing I always do when I'm putting in a zipper is I interface my fly facing first which I've already done here with a mid to heavyweight interfacing.
How do you make a casing for a drawstring bag?
1:266:18Drawstring Bag With Contrast Casing | Beginner Friendly DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo they lay flat and look. Nice. With your bag outer pieces right sides up take one casing pieceMoreSo they lay flat and look. Nice. With your bag outer pieces right sides up take one casing piece fold it in half and Center it along the top edge of the bag piece so all the raw edges are at the top
How do you turn men's pants into women's?
5:0812:03Turning Daggy Men's Pants into Fitted Women's Trousers - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow here I'm just using one of my pattern pieces that I already have. If you were gonna do this youMoreNow here I'm just using one of my pattern pieces that I already have. If you were gonna do this you could just use a pair of pants that fit you really well I just use them to reshape the crotch.
How do I make a pant leg seam?
1:075:083 Sewing the Inner Leg Seam - YouTubeYouTubeStart of suggested clipEnd of suggested clipBecause you don't really want it to stand out just in case there's mistakes to start sewing the sideMoreBecause you don't really want it to stand out just in case there's mistakes to start sewing the side. You're going to sew five stitches forward and then reverse to the end of the pants.
How much elastic should I use for a waistband?
I am using 3/4″ (2 cm) wide non-roll elastic for this project, though I usually use 1″ (2.5 cm) wide elastic for most garment waistbands. Add 1/4″ (0.5 cm) to the elastic width, which brings me to 1″ (2.5 cm). That is how much you need to fold and iron down the second time.
How to keep seams and casing tidy?
In order to keep your seams and casing tidy, iron open the side seams, with one seam allowance to each side (bottom picture. In order to show the seams, I rearranged the tube of fabric.).
What is the most important skill to know about sewing?
And we’re going to start transitioning into sewing not only objects, but also clothing! Hooray! One of the most important skills to know is sewing a casing for an elastic waistband, which is fantastic for making clothing for children and easy-fitting clothing for adults! It’s actually pretty similar to hemming, ...
How to unscrunch a safety pin?
Pull the safety pin through the casing bit by bit. You need to scrunch up the fabric to move it forward inside the casing, then gently pull on the fabric behind it to un-scrunch it. (top) Pull the safety pin all the way around and back out the opening .
How big is a rectangle of woven fabric?
First off, cut two 8 x 13″ (20 x 34 cm) rectangles of woven fabric. You could really use any size you want, but this is a good size to practice on without wasting fabric and elastic.
Do you see that area where the fabric is gathered less?
Do you see that area where the fabric is gathered less? That’s where the overlapped elastic ends are . This is why I like to keep that part in the back of the garment but, in any case, you won’t even notice it when the garment is worn and the waistband gets stretched.
Can you use a sewing machine to loop fabric?
Now let’s sew! If your sewing machine has a free arm (more about that here ), use it so that you can loop your fabric tube around it, as seen above.
How to sew elastic waistband?
One is more time consuming than the other. The easiest way to do this task is to create the casing first, then stitch the casing in place. The third step is to insert the elastic inside the casing.
How to make a slit in a waistband?
The first step is to make a small slit in the waistband. This is your entry and exit point. Next, you need to attach a safety pin to one end of the elastic strip to help you thread the elastic through the casing. Once you have that done, all you need to do is sew the two ends together using a zig-zag stitch.
How Can I Add Elastic to The Bottom of My Pants?
If you are looking to make knickers then you need to measure the pant leg length for both legs and mark where you want the pants to end. Then you cut to size leaving enough extra fabric to make the casing.
How to make a casing from scratch?
If you are making the casing from scratch, then start by sewing a thine line about 1/4 of an inch above the raw edge. This gives you an even line to work with.
What stitch to use to sew through elastic?
When you sew through elastic you want to use a zig-zag stitch. Not only does this stitch provide extra strength to your garment it helps the fabric stretch with the elastic.
Why are elastic waistbands good?
Elastic waistbands are a good option because they eliminate the use of zippers and buttons. This is a good thing as when people get injured or older it is hard to manipulate those items.
How to get tight fit on elastic?
Once you get that measurement figure, subtract 2 to 4 inches off the measurement and then cut your elastic to that new size. If you want a really tight fit, then you may have to subtract another 2 to 4 inches off the elastic. So 4 to 8 inches are removed from the original measurement.
How to make a waistband for a skirt?
Step 1. Cut the fabric strip for the waistband from the crosswise grain of the fabric. Measure the waist edge of the skirt and add 1 inch seam allowance. The width of this strip should be 4 inch for inserting a 1″ elastic. Join the ends of the fabric strip to form a tube (with a 1/2 inch seam allowance) Step 2.
How to shirr a waistband?
On the fabric you are going to shirr make parallel lines 1/4 inch apart. Atleast 5 lines should be done closely for the shirring to work on a waistband. Wind a bobbin with thin elastic thread ; ensure that you are not stretching it as you wind. Gently and slowly wind the elastic thread on the bobbin.
How to use elastic thread for sewing?
Stitch along the parallel lines; Use the elastic thread like the regular bobbin thread ; Back stitch to anchor thread at start and finish of stitching (It is a good idea to try this on a scrap fabric if you are doing it for the first time.)
How to sew elastic to a skirt?
Make a tube of the elastic by sewing the edges together. Sew with a tight zig zag stitch for strength. Sew the skirt tube. Divide the skirt waist edge and elastic tube into four sections and mark with a pin or pencil. Keep the elastic and skirt tube right sides together. (The skirt inside the elastic tube) Pin in place, matching the marks you have made. Stitch the elastic and skirt together with a 1/2 inch seam allowance, Stretching the elastic as you sew to match the skirt waist edge
How to change the stitch on a zig zag?
Change the stitch to zig zag stitch in your machine. Stitch the elastic along the seamline (do not extend over the seam edge); You will have to stretch the elastic to adjust the elastic to the fabric. Step 7. Flip the waistband fabric strip over the elastic to the inside of the garment. Step 8.
How to make a skirt with elastic?
Step 1. When you cut the fabric for the garment you will have to add extra fabric at the top edge which is twice the width of the elastic + 1/8-1/4 inch ease + 1/2 inch seam allowance. Step 2. Cut the elastic.Try the elastic on the waist (where you will be resting the skirt) and fit it snugly.
What is a paper bag waistband?
A paperbag waistband is a channel elastic waistband or a straight waistband which clinches around the waist just like a paper bag, a little down from the upper edge. There is an upper lip of fabric (which may be ruffled or pleated) above the waistband.
How to sew waistband on pants?
Sew the outer waistband to the pants, right side to the right side. You will now want to make sure that you have got the right height of the waistband as it needs to fit comfortably. Perhaps you only want a slim waistband, but maybe you want a waistband that goes above your waist a little. The waistband also needs to be at the same height all the way around for consistency. The next step is to turn the pants inside out and press the waistband. The seam allowance needs to go up away from the pants.
How much should the stitching line overlap on a t-shirt?
You then need to check the pressed-up fold on the inner waistband. It should overlap the stitching line by a maximum of ⅛ inch.
Do you iron waistband before sewing?
Before you start sewing the waistband, it is a good idea to wash the fabric so that it won’t shrink before it has been added to the pants. Once you have the waistband sewn to the pants it won’t matter if it all shrinks. Once the waistband is dry, iron it so that it’s not wrinkly. You will want the material to be as smooth as possible.
How tall should a casing be for elastic waist?
You can also apply the same idea to a casing (I would make it at least 1/2″ tall and use 3/8″ elastic) for an elastic waist.
Can you use a commercial waistband pattern on a skirt?
commercial pattern, or create your own waistband pattern (I show you how in the video below) so you can keep your original pattern piece for future use or reference. This waistband is basically sewn like the traditional waistband, but with minor changes. It can be used on skirts and pants that have a back or side zipper.
How To Measure Elastic For Waistband?
To correctly measure elastic for the waistband, use a tape measure . Place it on your waist or wherever you would want your pants to sit on your torso. Let the tape measure go all the way around until the two opposite sides are touching. The number is the size of your waist in inches.
How to keep elastic waistbands from stretching?
One of the major aspects of care for elastic waistbands is washing and drying. Avoid washing in hot water and machine drying. Heat is a major factor in stretching elastic.
How to attach elastic to pants?
When you are using elastic only as of the waistband, attach the waistband on your pants in four parts. The back front and on both sides, then sew it onto the pants. When you get to the ends of the elastic, you can sew them together, or use another piece of fabric to join them.
How to make a sleeve tighter?
Wrap the elastic around your sleeves. Pull or release to get how tight, you want the garment to be. With a pen, mark the point where the ends of the elastic will meet. Then, leave room for a seam allowance when you sew the fabric in the sleeves.
How to cut elastic band?
Place the elastic on your working table and cut at the point you have marked with your fingers. Use a sharp pair of scissors to cut the elastic band. Step 3.
How to measure waist for pants?
Step 1. For this method, you will only need your tape measure. Put it on your waist or wherever you like to wear your pants at and around your torso. Make sure that the two ends of the tape measure are touching and that it lies flat on your body. Do not pull it towards your body. Let it be snug around it.
What happens if you measure elastic wrong?
If you measure it wrongly, you will find that your clothes are either too tight or too loose to wear.
