Take the stocking and turn it RS out through the gap then push the lining side of the stocking into the outer. Turn the fabric edges of the gap under and press. Top stitch round the top edge to neaten and close the gap. Fold the cuff over to the RS of the stocking so that it overlaps the stocking and cuff seam a little.
How do you sew stockings together with one cuff?
Repeat with the other piece of cuff fabric. Now take one cuff tube and slip over the outer joined stocking RS together and matching the seam on the cuff with the left (heel) side seam of the stocking. Stitch together all the way round, press the seams open then pull the cuff upwards so it extends above the top of the stocking outer.
How much fabric do I need to make a Christmas stocking?
You will need… 1 Main fabric: 45x60cm (18x24in) 2 Cuff fabric: 25x66cm (10x26in) 3 Lining fabric: 45x60cm (18x24in) 4 Wool for pom poms 5 Matching sewing thread 6 Download your free Christmas stocking pattern PDF here
Who made this Christmas stocking sewing pattern?
This Christmas stocking sewing pattern was created by Rebecca Reid for Simply Sewing Magazine. Simply Sewing is a practical magazine for anyone who sews or wants to start – it’s full of original patterns to sew and it’s packed with tips and advice.
How do you turn a cross stitch stocking Rs?
Stitch together almost all the way around the top of the cuffs, leaving an 8cm (3 1 ⁄ 8 in) gap for turning. Take the stocking and turn it RS out through the gap then push the lining side of the stocking into the outer. Turn the fabric edges of the gap under and press.
How to secure a stocking?
How to make a stocking loop?
How to sew a band on a sleeve?
How to make a stocking with a rotary cutter?
How to put initials on a Christmas stocking?
How to measure for a band?
See 1 more
How do you cut and sew stockings?
2:0413:17EASY CHRISTMAS STOCKING SEWING PATTERN - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo be facing each other and on the inside while we stitch our stocking. So again using whatever seamMoreTo be facing each other and on the inside while we stitch our stocking. So again using whatever seam allowance you want you can use a half an inch or a quarter inch we're going to stitch.
How much fabric do you need to make a stocking?
How much fabric do I need to make a Christmas stocking? Usually, half a yard (half a meter) will be more than enough to make one Christmas stocking in average size, but it's even more fun if you use scraps.
How do you hand stitch stockings?
10:1317:17DIY Dollar Tree Farmhouse Christmas Stocking -Hand Sewing 101YouTubeStart of suggested clipEnd of suggested clipJust sew down as wide as you want your cuff to be with a little bit of a seam allowance. It'sMoreJust sew down as wide as you want your cuff to be with a little bit of a seam allowance. It's usually just about a half an inch as more than you need okay.
How do you make stockings at home?
Fold ½ yard of red, white, or patterned fabric in half, right sides together. Trace a stocking shape onto the fabric and cut out two shapes. With right sides together, sew around the stocking shape with a running stitch, leaving the top open. Turn the top edge inside and hem, then turn the stocking inside out.
What fabric is best for stockings?
Wash, dry and press the fabric of your choice. Flannel is a good choice for stockings, as well as fleece or cotton. You'll want the main fabric per stocking, as well as a coordinating fabric (mine was solid) for the turned cuff at the top and the hanger.
What is the standard size of a Christmas stocking?
18 to 28 inchesGenerally speaking, standard-size stockings range in length from 18 to 28 inches.
How do you make fabric Christmas stockings?
0:154:08How to Make Christmas Stockings with a Lining - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have a free pattern available in two sizes fold the outer fabric in half pin the pattern to theMoreWe have a free pattern available in two sizes fold the outer fabric in half pin the pattern to the two layers of fabric.
How do you sew a Christmas stocking with a cuff and lining?
6:2212:20Adding a Contrasting Cuff. Adapting the 15 minute Easy Stocking Pattern!YouTubeStart of suggested clipEnd of suggested clipPlace them right sides together and pin in place along the top edge sew along the top edge with a 3MorePlace them right sides together and pin in place along the top edge sew along the top edge with a 3 8 inch seam allowance. Repeat on the other side. And complete the rest of the stocking.
How do you make a no sew Christmas stocking?
0:031:42How to Make a No-Sew Stocking - Martha Stewart - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut once you glue the two together. So put a bead of your fabric glue along the very outer edge. AndMoreCut once you glue the two together. So put a bead of your fabric glue along the very outer edge. And then apply this right on top of the other.
How do you make leg stockings?
0:274:07DIY Thigh High Socks/Stockings - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing to do is put your tights flat on the table you're going to need to cut as close to theMoreFirst thing to do is put your tights flat on the table you're going to need to cut as close to the top as possible all on each. Leg. Before you cut your elastic.
How do you make decorative stockings?
1:003:57How to Make a DIY Christmas Stocking - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we have all of the paper shapes. Cut out and now we're going to trace them onto the felts and cutMoreSo we have all of the paper shapes. Cut out and now we're going to trace them onto the felts and cut them out again. Place all of your shapes on the stocking. And pin them in place for sewing.
How do you make a stocking look full?
Pick out items like pencils, crayons, small watercolor sets, or stickers to put in the child's stocking. There are tons of fun craft supplies you can find that don't cost very much and are small enough to fill any size stocking. Coloring books, small journals, stamps, and fun erasers can go in the stocking as well.
How do I calculate how much fabric I need?
Figure out how much fabric you need with this formula: Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number). Total number of pieces divided by number of pieces that fit into width equals number of rows you need.
What do I need to make a Christmas stocking?
0:154:08How to Make Christmas Stockings with a Lining - YouTubeYouTubeStart of suggested clipEnd of suggested clipHey guys it's Clara from online fabric store making Christmas stockings is a fast and easy projectMoreHey guys it's Clara from online fabric store making Christmas stockings is a fast and easy project that anyone can do you can use a variety of materials for the outer fabric. And the lining.
What size is one yard of fabric?
36 inches longVery simply, one yard of fabric is 36 inches long. But working out how much fabric you need for a sewing project is a little bit more complicated than that. While a yard in length is always a yard, fabric width varies according to where you're buying it. Average widths are between 33-44 inches.
How much fabric do you need for a top?
Tops: Shirts are usually made using a single width fabric that is 36 inches wide. You typically need 2.4 meters for a full-sleeved shirt and 2.2 meters for a half-sleeved shirt. Women's tops might have more details on sleeves that require more material.
Easy to follow instructions for sewing a Christmas stocking with video
Hey y’all – today I’m sharing our new Christmas stockings. Every few years I get a craving for a change in our Christmas decor style, and this year I also needed to add a 5th stocking as we’ve added a 5th family member. Luckily it’s easy to sew Christmas stockings and I’ve got a tutorial including video to show you.
Fabric Selection
The shift toward more modern Christmas decor coincided with a shift towards less busy design in our home overall, so I love how these turned out. That quilted velvet and creamy fleece fabric below were both exactly what I didn’t even know I wanted until I saw them in the fabric store.
How to Sew Christmas Stockings
I made a video so you can see how to use the free Christmas stocking pattern I shared a few years ago to make these. To make your own stockings, you’ll need:
Sewing Part 1: Cut and Sew The Stocking Pieces
Start by cutting out your stocking pieces. You’ll need two mirrored body pieces, a cuff and a loop. The cuff and the loop are rectangles and dimensions are written on the pattern. If you are sewing a fuzzy fabric, you’ll want to consider the nap and maybe cut the fabric in a single layer instead of folding it.
How to secure a stocking?
Work the band so that it is evenly spaced around the opening of the stocking. Pin or use fabric clips to secure. Grab your loop. On the left side of the stocking, carefully insert the loop between the band and the lining. Also, make sure that the folded end of the loop is inserted and the raw edges of the loop are lined up with the previous raw edges. Again, pin to secure.
How to make a stocking loop?
Let’s make the loop, or the hanger, of your stocking. Cut out a piece of fabric 2 1/2″ x 8″. Lengthwise, fold the bottom 1/2″. Press. Lengthwise, fold the top 1/2″. Press. Next, lengthwise, fold in half and press. Pin it to hold. Topstitch around the entire loop. Pinch it in half and set it aside.
How to sew a band on a sleeve?
Lay your band piece- right side up, in front of you, horizontally. Bring the left side over to the right side. Mark your seam allowance with your air erasable marker, which would be 1/2″. Pin. Sew. Cut any excess to eliminate bulk. Press open the seam. With your band piece in front of you, seam up, fold the fabric in half, forming a band, exposing the right side of the fabric. Align the seams and raw edges. Pin or use fabric clips to hold it in place.
How to make a stocking with a rotary cutter?
If you have a rotary mat and cutter available, I suggest using it for this part. Fold your lining fabric in half and place it on the rotary mat. Next, lay your pattern on top of the fabric. If needed, lay fabric weights to hold the pattern in place. Using your rotary cutter, cut out the lining pieces. Otherwise, you can use your fabric scissors to cut out the lining pieces. Remove the weights and the pattern. Place a few fabric clips around the stocking to hold it in place. Next, using an air erasable marker and ruler, mark 1/2″ seam allowance around the entire stocking, excluding the top. Go back and connect all the dots. Lastly, pin the pieces together.
How to put initials on a Christmas stocking?
After sewing, flip the band over to cover the “ugly” seam allowance. This will also expose your loop. Using your fingers, work the band to lay flat. After you have worked it flat, press your stocking. If you would like, you can hand stitch initials on your Christmas stocking. Otherwise, if your machine has an embroidery option, you could embroider a name on the stocking. Have fun with it!
How to measure for a band?
Measure across the top from the left to the right. Double that amount and then add an inch. That is the length of your band.
Who created the Christmas stocking pattern?
This Christmas stocking sewing pattern was created by Rebecca Reid for Simply Sewing Magazine. Simply Sewing is a practical magazine for anyone who sews or wants to start – it’s full of original patterns to sew and it’s packed with tips and advice. Rebecca Reid is a sewing designer who regularly contributes patterns to Simply Sewing. She’s been sewing since she was a child and has worked for a range of craft magazines over the years.
How to turn a stocking RS out?
Take the stocking and turn it RS out through the gap then push the lining side of the stocking into the outer.
How to make a tube out of a cuff?
Step 1. Take one cuff piece of fabric and fold in half widthways with RS together and stitch down the 21cm (8 ¼in) side to make a tube. Repeat with the other piece of cuff fabric.
How much seam allowance for a t-shirt?
Use a 1.5cm ( 5 ⁄ 8 in) seam allowance unless otherwise stated.
How to secure a stocking?
Work the band so that it is evenly spaced around the opening of the stocking. Pin or use fabric clips to secure. Grab your loop. On the left side of the stocking, carefully insert the loop between the band and the lining. Also, make sure that the folded end of the loop is inserted and the raw edges of the loop are lined up with the previous raw edges. Again, pin to secure.
How to make a stocking loop?
Let’s make the loop, or the hanger, of your stocking. Cut out a piece of fabric 2 1/2″ x 8″. Lengthwise, fold the bottom 1/2″. Press. Lengthwise, fold the top 1/2″. Press. Next, lengthwise, fold in half and press. Pin it to hold. Topstitch around the entire loop. Pinch it in half and set it aside.
How to sew a band on a sleeve?
Lay your band piece- right side up, in front of you, horizontally. Bring the left side over to the right side. Mark your seam allowance with your air erasable marker, which would be 1/2″. Pin. Sew. Cut any excess to eliminate bulk. Press open the seam. With your band piece in front of you, seam up, fold the fabric in half, forming a band, exposing the right side of the fabric. Align the seams and raw edges. Pin or use fabric clips to hold it in place.
How to make a stocking with a rotary cutter?
If you have a rotary mat and cutter available, I suggest using it for this part. Fold your lining fabric in half and place it on the rotary mat. Next, lay your pattern on top of the fabric. If needed, lay fabric weights to hold the pattern in place. Using your rotary cutter, cut out the lining pieces. Otherwise, you can use your fabric scissors to cut out the lining pieces. Remove the weights and the pattern. Place a few fabric clips around the stocking to hold it in place. Next, using an air erasable marker and ruler, mark 1/2″ seam allowance around the entire stocking, excluding the top. Go back and connect all the dots. Lastly, pin the pieces together.
How to put initials on a Christmas stocking?
After sewing, flip the band over to cover the “ugly” seam allowance. This will also expose your loop. Using your fingers, work the band to lay flat. After you have worked it flat, press your stocking. If you would like, you can hand stitch initials on your Christmas stocking. Otherwise, if your machine has an embroidery option, you could embroider a name on the stocking. Have fun with it!
How to measure for a band?
Measure across the top from the left to the right. Double that amount and then add an inch. That is the length of your band.
