How to sharpen a chainsaw by hand with a file?
Sharpening by Hand. When sharpening by hand, always endeavor to follow the following steps: 1. Stroke away from your body: When sharpening, always make outward strokes from your body while also ensuring that the file is at 30 or 35 degrees to the bar. Cut a slot in a log that would help hold the bar while sharpening.
How do you sharpen the chain of a chain saw?
Part 2 Part 2 of 3: Sharpening the Cutters
- Slide the file across the face of the cutter. Hold the file so that it remains level and flat over the top of the chain.
- File the cutter 3 to 10 times until it is sharp. ...
- Sharpen every second tooth from the starting point. ...
- Rotate the chainsaw 180 degrees. ...
- Use the same motion to sharpen every other tooth. ...
How to shorten the chain on a chainsaw?
- Put the chain breaking tool in one line with this link, and, in addition to this, you have to line the push arm with the pine on one of the ...
- After you have taken away all the needed links, you should put the master link into the rivet tool. ...
- After all these manipulations your chain gets shortened enough and you can continue using it.
What is the best chainsaw ripping chain?
The sequence of Granberg ripping chain is compromised of two scoring cutters and two clearing cutters. The good folks at Granberg make the best ripping chains on the market and they can make you a custom chain to fit any size chainsaw setup you’re running.
How do you sharpen a chainsaw chain with a file guide?
0:265:49Learn how to Sharpen a Chainsaw with a File Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what you would do is you would go all the way around the chain. And you would try to hold. HoldMoreAnd what you would do is you would go all the way around the chain. And you would try to hold. Hold this this round file steady. And even and at a 30-degree angle to sharpen all the cutter links.
What kind of file do you use to sharpen a chainsaw?
Chainsaw chains are sharpened with special files. While some professional loggers use square files like the ones to sharpen knives, almost all other chainsaw owners use round files for sharpening. There are three common sizes of chainsaw files: 5/32, 3/16 and 7/32.
What is the easiest way to sharpen a chainsaw?
1:564:40The ABSOLUTE Easiest way to Sharpen a Chainsaw! (Top Secret)YouTubeStart of suggested clipEnd of suggested clipBecause really the best way i think is to rotate your chains.MoreBecause really the best way i think is to rotate your chains.
How many times can a chainsaw chain be sharpened?
A chainsaw chain can be sharpened up to 10 times, sometimes more, before the entire chain needs replacing. It's mostly dependent on two things; the amount of wear your chain incurs and the amount of metal removed every time you sharpen.
What is the best chainsaw sharpener?
BEST OVERALL: Oregon 410-120 Chain Grinder.BEST BUDGET: Powercare Field Kit (8-Piece)BEST BENCH-MOUNTED: Oregon 520-120 Bench Mount Chain Grinder.BEST WALL-MOUNTED: Buffalo Tools ECSS Electric Chainsaw Sharpener.BEST BAR-MOUNTED: Oregon 23820 Sure Sharp Chainsaw Manual Filing.More items...•
How do I know if my chainsaw chain is sharp?
0:020:41How To Immediately Tell If Your Chain Is Sharp Enough - YouTubeYouTubeStart of suggested clipEnd of suggested clipThese. We have some nice long chips here. And when it starts to turn into sawdust. That's when youMoreThese. We have some nice long chips here. And when it starts to turn into sawdust. That's when you know you need to resharpen your chain.
How do I hand sharpen a chainsaw?
3:1820:36No Nonsense Guide to Chainsaw Sharpening. How To ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipI hold both ends of the file. And give it a good firm. Stroke now i am pushing. It kind of into theMoreI hold both ends of the file. And give it a good firm. Stroke now i am pushing. It kind of into the tooth. So that i'm getting both that top edge. And the side edge this top edge here.
Why does my chainsaw chain dull so quickly?
If your chain dulls quickly, then it could be a couple of things. Check your user's manual to ensure that you are using the right sized file for your chain. Alternatively, you could be applying too much pressure when you file. This will create cutting edges that are too thin and dull quickly.
How long should a chainsaw chain stay sharp?
On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
How tight should a chainsaw blade be?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can't pull the drive links out of the bar nose.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
Can you sharpen a chainsaw with a flat file?
7:2813:56103 How To Sharpen Your CHAINSAW By Hand with File and ...YouTubeStart of suggested clipEnd of suggested clipYou want that depth gauge to be flush with this now that one's not bad at all it's pretty good ifMoreYou want that depth gauge to be flush with this now that one's not bad at all it's pretty good if that were to stick up a little bit you just take your flat file. And just give it a couple strokes.
What angle do you sharpen a chainsaw chain at?
between 25° and 35°The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle. To maintain the correct angle, we recommend that you use a sharpening grid or a filing gauge as an aid.
Why does my chainsaw chain get dull so fast?
If your chain dulls quickly, then it could be a couple of things. Check your user's manual to ensure that you are using the right sized file for your chain. Alternatively, you could be applying too much pressure when you file. This will create cutting edges that are too thin and dull quickly.
How do you sharpen a chainsaw wood?
10:0515:07How to Sharpen a Chainsaw In the Woods -E10 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn just like you've got it in a vise. So this is the tip that they showed. Me i've got the tipMoreIn just like you've got it in a vise. So this is the tip that they showed. Me i've got the tip against my chest. And it's pretty easy in the winter time with a big thick coat but in the summertime.
How to sharpen a chainsaw with a table top?
1. Clamp the bar of the chainsaw to your work surface. Use a tabletop clamp or a vise to hold the chainsaw in place on your work surface . This will prevent the saw from shifting as you sharpen it, and result in a much more consistent and easy sharpening process.
How to use a chainsaw chain cutter?
1. Slide the file across the face of the cutter. Hold the file so that it remains level and flat over the top of the chain. In one smooth motion, push the file through the cutter. You shouldn’t need to apply a lot of pressure, only enough so that you feel the file grinding against the cutter.
What angle should I file a chainsaw?
Line your file up so that it is parallel with this etching to set the proper angle. The angle for filing will normally be 25 or 30 degrees, but some may be flatter.
How to level a raker with a flat file?
Use a flat mill bastard file to level the raker. Holding the depth gauge in place , run a flat file over the top of the raker until it is level with the depth gauge. While the depth gauge will protect other teeth from being filed, there is nothing to stop the gauge itself from being filed down.
How big is a chainsaw chain?
Note: Typical sizes for the chain are 3⁄16 inch (4.8 mm), 5⁄32 inch (4.0 mm), and 7⁄32 inch (5.6 mm) in diameter.
How to use a depth gauge on a raker?
Place a depth gauge over the chain. A depth gauge is a tool used to ensure the heights of the rakers are kept at the right height. They should be available at your local hardware store, and may even come with the file. Set the depth gauge over the chain near your starting point and push it forward until it presses against a raker.
What can I use instead of chainsaw oil?
Make sure the cap is tightly screwed back in before you operate your chainsaw. Tip: Instead of bar and chain oil, you can use a vegetable oil such as canola oil.
How to sharpen a chainsaw?
To sharpen a full chain, you should begin by sharpening all of the cutter links that are facing one direction. Once you’ve finished that side, you should rotate the entire chainsaw (or move to the other side), so that you can sharpen all of the cutter links that face the other direction.
What to do before sharpening chainsaw?
The first thing you need to do before you start sharpening your chainsaw with a file guide is make sure that you have the right size file guide for your specific chain. When choosing a file guide, the main thing you need to consider is the pitch of your chainsaw chain.
Why does a round and square file take longer to sharpen?
Using a manual round and square file also takes longer because you have to sharpen each cutter link, and then go all the way back around to sharpen the guide links (you can learn about the parts of a chainsaw chain here ). With a file guide, all of these problems are either eliminated or reduced.
How long does a chainsaw chain last?
Even with frequent use, a chainsaw chain is capable of lasting for 5+ years.
Do you need to sharpen a chainsaw chain?
Even though it needs to be sharpened, your chainsaw chain will still be sharp and you should wear a hearty pair of work gloves to make sure you don’t cut yourself.
Can you sharpen a chainsaw with filing tools?
You can still sharpen a chainsaw successfully with the traditional filing tools. However, there are some common problems with the traditional filing approach. Such as…. Free-hand sharpening makes it difficult to get an accurate angle (30 degrees for most chainsaws).
How to sharpen a chainsaw?
In order to sharpen the chainsaw, you must find a good spot to clamp it down. A table will work fine for this job. Herein, a vise or a tabletop clamp can hold the chainsaw down, so it does not shift while you sharpen.
How to sharpen a cutter?
Start Sharpening! Once you know the right position, place the file and push it through the cutter. Do this a few times, without excessive pressure, but remember to always go forward. Going backward with your file will damage the cutters and the file itself. Sharpen every second cutter from the first marked one, working on each 3 to 10 times.
What is a chainsaw made of?
Made of metal materials . Easy to use. Sharpening chainsaws can be a hassle. Without finding the right store, or the right kind of machine, and the added danger, it could get annoying to go through so much trouble every time the saw goes blunt.
Is it safe to sharpen a chainsaw with a file guide?
Using file guides can be an easy and safe way to do this. Added to that, it is a cheaper alternative to the various other methods. All you need to do is follow a few easy steps to learn how to sharpen a chainsaw with a file guide!
Do-it-yourself chainsaw sharpening
The chain tooth planes the wood like a plane, and the chip thickness is adjusted by the height of the stop.
Files and tools
The main one with which the saw tooth is sharpened is round. Flat is used to adjust the height of the cutting depth gauge.
How to sharpen a chainsaw correctly
The cutting element of any chainsaw is a chain, but after a certain time or when working with low-quality wood, it tends to become dull. Therefore, sharpening the chainsaw chain is an integral part of the operation of the device.
Chainsaw teeth
Chainsaw teeth have a specific geometry. You need to understand and know what part of them should be sharpened. In general, the "logic" of cutting wood resembles a plane.
Depth gauge adjustment
Many novice users of chainsaws, after sharpening the cutting tooth, forget to adjust the cutting depth limiter, it must be lowered in proportion to the wear of the cutting link. The required amount of sewing can be determined using the template included in the chain sharpening kits.
How to sharpen a chainsaw chain with a file
When sharpening the chainsaw, 1/5 of the file should extend beyond the edge of the saw tooth. To maintain the correct angle of sharpening the chain with a file, use the guide clip (sharpening template for the chain file), which is included in the manual chain sharpening kits.
Saw chain depth gauge point
If you have no experience with chain sharpening, we recommend that you use the special depth gauge adjustment templates for setting the correct cutting angle that are included with the chain sharpening kits. Depth gauge templates are also called gauges.
Chain sharpening errors
When manually sharpening the saw chain without a template, the sharpening angle may be violated.
When to sharpen
There are a number of factors that will tell you when it’s time to sharpen your chainsaw chain:
Electric machines
For straightening a large number of chains, as a rule, in service centers or in manufacturing plants, electric sharpening machines are used. Depending on the manufacturer, the design of the machines may differ, but they have the same principle of operation.
Sharpening with a file
The first thing you need to sharpen the chain, or tweak it a little, are special files.