- First, install the buckles provided in the kit onto your boats if necessary and cover the nylon strapping around your boat to make a framework for the shrink wrap.
- After the strapping has been installed, wrap the entire pontoon boat in shrink wrap.
- Use the tension Bands to secure the Wrap onto the boat.
- After putting the wrap onto the pontoon start applying heat for the wrap to shrink.
- As you apply the shrink wrap, ensure that any holes or cracks in the shrink wrap are patched with a piece of duct tape or some other type of ...
How to shrink wrap a boat?
Try to use a single piece of shrink wrap to cover the entire boat. If you need to use 2 pieces, join them with shrink wrap tape and heat. Weld the shrink wrap to the perimeter band with a heat tool. Put on a heat-resistant glove to protect your hand as you work. Hold the heat gun slightly above the edge of the shrink wrap.
How do you use bubble wrap on a boat?
Use bubble wrap as padding for your boat's sharp corners and any area of the boat that could puncture the shrink wrap such as windshield wipers. Strategically place support poles throughout your boat and attach strapping lines to the poles. Ensure that poles and lines are sturdy enough to support the pressure from the shrink wrap.
What do you put on top of a boat for winter?
Don't forget your accessories such as the support poles, strapping lines and heat gun. Use bubble wrap as padding for your boat's sharp corners and any area of the boat that could puncture the shrink wrap such as windshield wipers. Strategically place support poles throughout your boat and attach strapping lines to the poles.
How do you Heat wrap a small boat?
Hold the heat gun slightly above the edge of the shrink wrap. Work all the way around the boat, lightly heating and patting down the tucked-in edge. Leave the back edge of the boat alone for now. The heat wrap will get warm, so be careful not to touch it with exposed skin.
How do you shrink wrap a boat by yourself?
1:278:40How to Shrink Wrap a Boat / Dr. Shrink, Inc. - YouTubeYouTubeStart of suggested clipEnd of suggested clipProcess. Simply cut a piece of tape and wrap your buckle. We now move to the perimeter band. ToMoreProcess. Simply cut a piece of tape and wrap your buckle. We now move to the perimeter band. To install this we will secure straps with an open loop on the end to the cleats and grab rails.
Is shrink wrapping a boat a good idea?
Shrink wrapping your boat will answer all your needs for winter storage as it will prevent animals and rodents from entering, and shrink wrap is non permeable and will prevent moisture from getting inside your boat and having mildew grow inside your boat over the wintertime.
What is the average cost to shrink wrap a boat?
Professional boat shrink wrappers use the boat's size to determine the final amount. When you have the boat covered by a professional, you should plan on spending $12-25 per square foot.
How long does it take to shrinkwrap a boat?
It would take a yard like Friel's Brewer facility anywhere from two to four hours to wrap a 26-foot center-console for winter storage. Friel didn't quote a price, but like most yards, his charges by the foot for shrink-wrap service. Flying bridges, radar arches or other appendages typically increase the price.
How long does shrink wrap last on a boat?
However, we've seen the occasional customer keep our wrap on their boat for years with success – but it's not typical. In short, it all depends on the stress presented by the environment, but 6 months to a year is a reasonable expectation.
Can you use a hair dryer for shrink wrap?
Yes, you can use a hair dryer to shrink certain types of shrink film, but it is definitively not recommended. At the end of the day, using a hair dryer to shrink wrap your products is a bit like cleaning your floor with a toothbrush... It does the job, but not well or efficiently.
How long does a wrap last on a boat?
3-5 yearsWraps tend to last 3-5 years, and even longer on vertical surfaces like the hull of a boat. The life of wrap depends on several factors including quality of printing materials, installation, care and exposure to elements.
Can you shrink wrap a boat with an electric heat gun?
Note: Electric heat guns can be used for shrinking Polyolefin film, but should not be used for shrinking boat & industrial shrink wrap.
How much does it cost to shrink wrap a 23 foot boat?
So if your boat is around the twenty to thirty feet mark, the price will start at approximately 12 dollars per foot. If you have a fifty footer, the price per foot will likely be around 25 dollars.
Does shrink wrapping a boat cause mold?
Shrink Wrap is an impermeable material, so it is crucial to have some type of ventilation/ anti-moisture system in place if your boat is shrink wrapped for storage purposes. Moisture can lead to mold, mildew and bacteria that can ruin the interior and upholstery of the boat.
How much does it cost to winterize and shrink wrap a boat?
Winterizing boat costs depend on the size of your craft and where your boat is located. A quick search online of “boat weatherization near me” will reveal a number of providers with a variety of associated costs. You can expect to spend $300-$500 each winter to have your boat shrink wrapped by a professional.
How much does winterizing a boat cost?
If you winterize your boat yourself, it will cost you about $250. This price includes the cost of winterizing the engine, the other systems of your boat, and cleaning it, stem to stern, inside and out. However, if you have the work done at a boatyard, expect to spend $500 up.
Does shrink wrapping a boat cause mold?
Shrink Wrap is an impermeable material, so it is crucial to have some type of ventilation/ anti-moisture system in place if your boat is shrink wrapped for storage purposes. Moisture can lead to mold, mildew and bacteria that can ruin the interior and upholstery of the boat.
How much does it cost to shrink wrap a boat for the winter?
You can expect to spend $300-$500 each winter to have your boat shrink wrapped by a professional.
How long does vinyl wrap last on a boat?
3-5 yearsWraps tend to last 3-5 years, and even longer on vertical surfaces like the hull of a boat. The life of wrap depends on several factors including quality of printing materials, installation, care and exposure to elements.
Can you travel with a shrink wrapped boat?
You should attach the boat shrink wrap cover differently for transporting your boat. Shrink wrap for boats in transit generally need no support structure: just install a couple of straps running fore and aft under the shrink wrap to give it support as it travels down the road.
How to shrink boat sheeting?
The safest way to shrink the uppermost part of the sheeting is with an extension. Secure the heat gun in an extension tool, then hold it up over the wrap. Work from the back to the front of the boat until the entire sheet looks flat and wrinkle-free.
How to remove shrink wrap from boat?
Remove shrink wrap by cutting it with a plastic edge. Using a sharp knife or a similar object may scratch up your boat.
How to make shrink wrap stick?
1. Tape over any holes or weak points you notice in the shrink wrap. Cover over holes with a thick layer of sheet wrap tape. Then, warm the tape up briefly with a heat gun to cause it to stick to the shrink wrap. In addition to the holes, tape over noticeable seams joining shrink wrap sheets together.
How to store a boat for winter?
When you need to store your boat for the winter or ship it to a new location, use marine shrink wrap to keep it in top condition. A tight layer of shrink wrap blocks out cold air, moisture, and sunlight. To install shrink wrap, fit sheeting over a frame of polyester strapping , then warm it with a shrink gun.
How to protect yourself from shrink wrap?
To protect yourself from any fumes released by the shrink wrap, wear a respirator or dust mask.
What does the vent on a boat do?
The vents let moisture out from underneath the shrink wrap, preventing mold from growing on your boat.
How to tighten a strap before tying it?
Pull the strap as tight as you can before tying it. For assistance, use a strap tensioning tool, available online and in most shrink wrap kits.
How to wrap a boat?
Once the shrink wrap has been applied to the entire boat, you will need to use the heat gun to heat the shrink wrap. This process will cause the shrink wrap to tighten over your support poles and to the sides, front and back of your boat. For a perfect wrapping, start from the bow of the ship and heat the wrap from the waterline upward.
How to keep mold out of boat?
To keep out any mold or mildew, install a few self adhesive vents will do the job.
How to secure a boat to a pole?
Strategically place support poles throughout your boat and attach strapping lines to the poles. Ensure that poles and lines are sturdy enough to support the pressure from the shrink wrap. Secure the lines to the bow, stern and sides of the boat.
Can you winterize a boat?
There are many precautions to take to winterize your boat, and using shrink wrap is one of the most effective ways to finalize the process. Leaving your boat out in the elements is not a good idea—winter weather can cause significant damage.
Can you shrink wrap a boat?
Following these steps after you get your boat home or to your storage facility will keep your boat preserved until you are ready for it the next boating season. Shrink wrapping your boat is a big job, but it can be done quickly, and it's much cheaper to do yourself. This is not a one person job, though, so have a couple of friends available.
Why do you put shrink wrap on a boat?
Framing under shrink wrap can be set at a high angle to keep ice and snow from accumulating. The slipperiness of the plastic also keeps the ice and snow from building up too quickly. You shouldn't get puddles or snow buildup, both hazards of tarp and canvas covers. Covers the entire boat.
What is the cheapest way to cover a boat?
The absolute cheapest (and worst) way this is done is just wrapping tarps over a boat's open areas and tying it down at the corners. For small boats, a tarp and rope cover can work.
Who needs shrink wrap?
Everyone who stores a boat for the winter outdoors should consider it. If you already have a winter cover for your boat, you're exempt. For smaller boats it may make less economic sense, but if your objective is to prevent damage to your boat and come back to a clean vessel in the spring, you should get a quote.
What is a canvas cover for a sailboat?
Holes for standing rigging, stanchions, radar arches, and other off deck items are cut into it. Canvas covers have their own set of pros and cons to consider, and one might be more appropriate for you.
What are the disadvantages of a boat tarp?
The disadvantages are many. Prone to loosening, blowing and failure. Gaps between tarps can't easily be sealed, so if you can't get one tarp big enough for the whole boat leaks are inevitable. Can't be tightened down and stretched taut enough to prevent flapping, blowing, loosening, and wear.
What conditions are common where you store a boat?
Windy conditions are common where you store the boat.
Is shrink wrap cheaper than canvas?
Smaller upfront cost. The annual cost of shrink wrap is lower than purchasing a permanent cover for your boat. While this is offset by the expense being incurred every year, if you don't have the cash right after you buy a boat or you don't expect to own the boat long enough to recoup the cost of a canvas cover this makes sense.
