Pour your Nason base coat into a paint sprayer. Nason Finishes recommends setting both gravity-feed and siphon-style spray guns to 1.4 mm to 1.6 mm to apply the paint. Spray the paint onto your car. Keep your hand even and move the spray gun or can back and forth at 8 to 10 inches from the surface.
Full Answer
How do you mix Nason paint for spray painting?
Nason Finishes recommends using a ratio of 8:1/2:4, or 8 parts of Nason base coat to 1/2-part base coat activator to 4 parts base coat reducer. Failure to mix the paint properly can clog your spray gun. If you're using aerosol cans, the paint should be properly mixed in the can for you, so skip this step.
How do you mix Nason base coat properly?
how do you mix nason base coat properly? it state to mix 8:1/2:4, none of the mixing cups i've got have an 1/2 mark on it. the only way i can think to mix it properly is to double the amount of color and reducer in oz's to get a whole oz in activator, which ends up being way to much paint for one coat.
How do you use a solvent basecoat?
A solventborne basecoat designed for overall repairs to OEM basecoat/clearcoat finishes. Apply 2 medium-wet coats or to hiding. Allow to flash until dull/dry between coats. To improve flake control in metallic colors, apply a mist coat in conjunction with the final coat.
How long does it take for Nason clear coat to dry?
If the paint drips, you're applying too much paint. Work in an even layer. Allow the base coat to dry the "flash time," usually about 15 minutes, then apply a second coat in the same manner. Let the base coat dry for at least 15 minutes before applying a Nason clear coat.
Does Nason basecoat need activator?
Mix your base coat with paint activator and paint thinner or reducer before proceeding. Nason Finishes recommends using a ratio of 8:1/2:4, or 8 parts of Nason base coat to 1/2-part base coat activator to 4 parts base coat reducer. Failure to mix the paint properly can clog your spray gun.
How do you spray base coat?
0:514:25How To Spray Basecoat on Your Car - Kevin Tetz Paints his Camaro with ...YouTubeStart of suggested clipEnd of suggested clipAnd about four inches from the surface. You will definitely get a feel for it as you read yourMoreAnd about four inches from the surface. You will definitely get a feel for it as you read your pattern while you're spraying. To keep the hose out of the car. I usually have it over my shoulder.
How do you mix Nason basecoat?
Mix 2 parts NasonXL Basecoat Color to 1 part NasonXL Reducer. Thin to spray viscosity of 16 secs with #4 Ford @ 77°F/25°C for spraying. Apply 2 to 3 single coats with 4 - 8 minute flash time between coats.
How do you use Nason ful base?
All Nason® primers, primer-surfacers and sealers as locally permitted. Apply two medium wet coats or to hiding. Flash each coat to dull/dry. For metallic colors, use a mist coat in conjunction with the final coat for best flake control.
What pressure do you spray base coat?
When spraying base coat clear coat systems, you want to spray at 26-29 PSI. You measure this PSI by pulling the trigger and letting air flow through the tip of your gun with your dial or digital readout saying 26-29 PSI.
What is the mixing ratio for base coat?
Base coat mixing is always a 50/50 mixture.
Does 2K base coat need hardener?
With the base coat system, the base coat requires no hardener(only thinner) and really just provides your colour, so 3 coats may not be needed.
What is the mixing ratio for Nason single stage paint?
8:1:2Combine the components by volume (8:1:2). Mix thoroughly prior to activation. Add 2-4 oz (60-120 ml) Nason® 495-01™ Fisheye Eliminator per RTS gallon as required.
Is Nason ful base acrylic or urethane?
Nason Ful-Thane IS Quality Single-Stage Topcoat A urethane single-stage topcoat that provides good quality and performance and features a wide range of sparkling metallic and rich solid colors.
What type of paint is Nason ful base?
solventborne basecoatA solventborne basecoat designed for overall repairs to OEM basecoat/clearcoat finishes.
How do you spray clear Nason?
Clean all surfaces with Nason® 441-05™ Silicone and Wax Remover or Nason® 481-75™ Surface Cleaner. In regulated areas use locally permitted silicone and wax remover or surface cleaner. Apply 2 medium wet coats. Flash 5-7 minutes between coats.
How do you mix Nason automotive paint?
0:314:46How to Mix Paint & Base Coat - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne part paint to one part reducer that gives you your two to one ratio. So let me show you how toMoreOne part paint to one part reducer that gives you your two to one ratio. So let me show you how to do. That. So that is right there to the one then we're going to take our reducer that. I just put in
How many coats of base coat should I apply?
Apply 2 coats of the base coat, and then wait for the paint to dry completely before sealing with 2 coats of clear coat.
How do you apply base coat nail polish?
After cleaning your nail surface from the old nail color, apply the base coat. When applying base coat, color and top coat, let each coat dry first before applying the next coat. Base coat needs to be dry before applying color, otherwise it will chip. You may think this process will be time-consuming.
Do you sand the base coat before clear coat?
If you have to sand the basecoat at any step it must be recoated with another layer of color before moving on to the clearcoat step. Sanding between layers of clearcoat is also not recommended. Wet sanding and polishing the final layer will yield a better result than doing it between each coat.
How many coats of base coat should I apply nails?
You should always apply one coat of base coat, two coats of polish, and two coats of top coat for an optimal manicure. The key to a salon-like mani is covering your nail in three strokes - any more tends to result in streaky, clumpy nails.
Description
A solventborne basecoat designed for overall repairs to OEM basecoat/clearcoat finishes.
Application
Apply 2 medium-wet coats or to hiding. Allow to flash until dull/dry between coats. To improve flake control in metallic colors, apply a mist coat in conjunction with the final coat.
Safety
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information.
Description
Nason®XL is a new basecoat product line featuring coatings that are fast and easy to apply for a long-lasting, collision-quality finish. Achieving an accurate color match to thousands of vehicles with our basecoat color system has never been easier.
Application
Apply 2 to 3 single coats with 4 - 8 minute flash off between coats. An additional coat may be required with colors difficult to cover. Not recommended over 1K substrates. Option for metallics and blending basecoat: After the final coat of color, adjust the air pressure and apply a final medium-wet drop coat.
Safety
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Safety Data Sheet for safety information. For use by professional, trained painters.
