how do you start a stihl ms360 chainsaw

by Ms. Cassandra Dickens Jr. Published 3 years ago Updated 2 years ago

How do you start a Stihl ms360 chainsaw?

Step 1 of 15: Before starting your chain saw, the chain brake should be activated by pushing it forward (see picture).
Step 2 of 15: Always remove the bar cover before starting your chain saw.
Step 3 of 15: If your chain saw is fitted with a decompression valve, press it now.

Full Answer

How to start a Stihl Chainsaw when the engine is cold?

Mar 16, 2022 · How do you start a Stihl ms360 chainsaw? Move the” Master” control switch to the cold start position. Pull the spark plug wire off of the spark plug and remove the spark plug from the cylinder head. Pull on the engine starter multiple times to clear the fuel out of the cylinder.

What type of Stihl to use for MS 360 Motor?

How do you start a Stihl ms360 chainsaw? Step 1 of 15: Before starting your chain saw, the chain brake should be activated by pushing it forward (see picture). Step 2 of 15: Always remove the bar cover before starting your chain saw. Step 3 of 15: If your chain saw is fitted with a decompression ...

How to start a Stihl Chainsaw with a decompressor?

This video illustrates the proper ways to start a STIHL chainsaw, as well as which methods to avoid (such as drop starting) and why. You’ll learn about the saw controls and how to position them related to the starting sequence for cold and warm starts. For example, always engage the chain brake before starting the engine, and if your saw has a purge pump primer feature, “pump …

How do you lubricate a Stihl Chainsaw?

6. Do not start cutting until you have a clear work area, secure footing, and a planned retreat path from the falling tree. 7. Keep all parts of your body away from the saw chain when the engine is running. 8. Before you start the engine, make sure that the saw chain is not contacting anything. 9. Carry the chainsaw with the engine

Is there a trick to starting a Stihl chainsaw?

Part of a video titled How To Start A STIHL Chain Saw - YouTube

0:39

4:07

And thumb fully wrapped around the handle your arm fully extended and elbow locked grasp the starterMoreAnd thumb fully wrapped around the handle your arm fully extended and elbow locked grasp the starter handle with your right hand and pull up on the world slowly. Until you feel resistance at.

How do you start a Stihl Rollomatic E Mini?

2:34

0:26

Make sure the chain brake is engaged grip. The front handle of the chainsaw firmly with your leftMoreMake sure the chain brake is engaged grip. The front handle of the chainsaw firmly with your left hand. Keep your arm on the front handle in a locked. Straight.

How do you start a Stihl easy start chainsaw?

Part of a video titled How to start your Stihl MS 250C Easy2Start Chainsaw. - YouTube

0:23

3:07

This lever all the way down past. These three points and in order to do that you push down pull theMoreThis lever all the way down past. These three points and in order to do that you push down pull the trigger and push it all the way down to the choke position once it's starting to start.

How do I start my Stihl chainsaw after sitting?

Just let the saw sit for 30 min and the excess gas will evaporate. Remove the spark plug, dry it, crank over the engine a few times to dry the cylinder. Now refit the plug and try again. Set the switch to “On”, set throttle to fully open, set choke to “Off” and crank over the engine.

How do you start a Stihl?

To start a Stihl chainsaw, start by pushing the chain brake forward to activate it and removing the cover over the chain and bar. Then, press down the primer valve several times if your chainsaw has one, and set the master control to the cold start setting.

How do you start a chainsaw that won't start?

Part of a video titled Top Reasons Chainsaw Won't Start — Chainsaw Troubleshooting

0:52

2:20

Free you can try cleaning the carburetor with carburetor cleaner to eliminate the clog. If cleaningMoreFree you can try cleaning the carburetor with carburetor cleaner to eliminate the clog. If cleaning is not effective you can often purchase a carburetor repair kit to replace some of the components.

How do you start a flooded chainsaw?

The more hands-on method to start a flooded chainsaw:

Have the chain break on.
Turn the choke off.
Activate the fast idle (by engaging the throttle lock/trigger assembly or pulling the choke out and pushing it back in.
Turn the on/off switch to on.

More items...

•

Jan 2, 2020

How do you start a Stihl chainsaw when flooded?

Replace the air filter and spark plug, and connect the spark plug wire. Leave the choke open and pull the starting cord several times. The chain saw should start.

Do you start a chainsaw with the brake on?

When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.

How do you start a chainsaw after running out of gas?

If you believe fuel has flooded the chainsaw engine, pull the starter cord several times while holding the throttle, dry and replace the spark plug, and then try starting the chainsaw again.Apr 6, 2022

How to start a Stihl chainsaw when it's cold?

Starting a chainsaw when the engine is cold requires using the choke. For a warm start, you can skip this step. So for a warm start, you’ll move the master control directly to the run position.

Is Stihl a good chainsaw?

STIHL is one of the best chainsaw brands on the market and you can be proud of your choice. Starting a Stihl chain saw isn’t too different to starting any other. Most have the same levers and switches – choke, throttle, recoil starter, etc. Some stuff may differ, even from one Stihl model to another.

Where is the decompression valve on a Stihl chainsaw?

Your Stihl chainsaw most likely has a decompression valve. It will be at the top of the engine cover, somewhere behind the front handle. Push the decompression valve. This relieves engine compression and makes it easier to pull the recoil starter.

What is the primer bulb on a Stihl chainsaw?

To one side of your Stihl chainsaw, you’ll find a small, translucent plastic bubble. This is the primer bulb and is used to remove air from the fuel pipe, so that it can flow to the carburetor.

Why won't my chainsaw start?

This happens when there is too much gas in the combustion chamber and the spark plug gets wet from the excess fuel. The most common cause for engine flooding is when you push repeatedly on the primer bulb, sending through too much fuel.

What happens if you leave a chainsaw standing?

If your chainsaw has been standing unused for a length of time, the fuel is likely to have gone stale. Old fuel should be drained, and the fuel pipe will need to be cleaned. Debris may also collect in the gas tank. This will mean that you need to flush the tank and clean the fuel pipe, before adding fresh fuel.

Why does my engine need a spark?

The engine needs a spark to ignite the fuel, that’s what the spark plug does. Spark plug failure is not uncommon, particularly with 2-stroke engines – like those used for most chainsaws. Carbon on the spark plug or corrosion can cause a weak spark, or no spark at all.

Is chainsaw a high speed tool?

Because a chainsaw is a high-speed wood-cutting tool, some special safety precautions must be observed as with any other power saw to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. STIHL's philosophy is to continually improve all of its products.

What happens if you spill gasoline?

If spilled or ignited by a spark or other ignition source, it can cause fire and serious burn injury or property damage. Use extreme caution when handling gasoline or fuel mix. Do not smoke or bring any fire or flame near the fuel or the chainsaw. Note that combustible fuel vapors may be vented from the fuel system.

Can you work in a tree?

Never work in a tree unless you have received specific, professional training for such work, are properly secured (such as tackle and harness system or a lift bucket), have both hands free for operating the chainsaw in a cramped environment and have taken proper precautions to avoid injury from falling limbs or branches.

What does it mean when a guide bar kicks back?

Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the operator.

Knowledge Builders