- Put the spool handle in the middle of the coil of barbed wire and walk it between the two posts until it’s flat. ...
- Return to the first post and attach the wire to it. ...
- Use the pliers to bend the end of the clip around the wire once or twice to bind the two parts securely together. ...
- Take the rest of the clip and wrap it around the post. ...
- After both ends of the clip are wrapped around the barbed wire, use the wire stretcher to pull it tight against the next post. ...
- Repeat this as many times as needed until the fence has been installed.
How do you attach a barbed wire to a post?
Barbed wire is under tension when spooled, so be careful not to hurt yourself while doing this. Return to the first post and attach the wire to it. To do this, force a gap between the two pieces of wire that make up the larger wire and then insert one end of the clip through this gap.
How to string barbed wire on a fence?
In order to string the barbed wire, one can use a fence stretching tool which can be easily purchased from the market. One can begin the process of stringing the barbed wire from one post and take to another and this process needs to be repeated till the time all pots are covered.
How do you attach a fence to a T post?
Come-a-long: This tool pulls the fence taught before attaching to the fence to t posts. Wire clips: Securely attaches fence to t-post studs to keep the wire in place and prevent excessive movement. Fence plier or bender tool: Helps wrap the wire clips around the fence material and t-post.
How far apart should fence posts be for barbed wire?
Fence stays: Optional support keeps barbed wire from sagging between posts. The typical spacing of posts is between 8′ and 12′. The distance should be determined by the type of fence and the amount of support that the fence needs in order to stay taught.
What are the benefits of barbed wire fencing?
Barbed wire fence posts and other types of metal fencing are affordable, easy to install, and durable. This type of fence can be used for: 1 Keeping livestock, like cattle, contained 2 Preventing predators from getting at livestock 3 Fending off pests, like deer, from gardens 4 Dividing different properties 5 Providing a play area for pets
Should studs be facing inward or outward?
Studs should face either inward or outward depending on whether it's more important to keep livestock in or predators out. If animals will be putting more pressure against the inside of the fence, face the studs inward. If animals will be putting more pressure from the outside of the fence, face the studs outward.
How deep should a t-post be buried?
That’s because the post will need to be buried at least 2′-2-1/2′ feet deep to prevent weather changes or determined animals from pulling them out. Studded t-posts feature bumps, or studs, on one side of the post.
What do you need to know before installing T posts?
Before installation of t-posts begins, be sure to have the proper tools and materials: T-post driver: A manual or powered t-post driver can make installation much easier. Tape measure: Mark the spacing between each post and assure posts are installed at a consistent height.
How heavy are T posts?
T-posts are made of high-quality steel that holds up to pressure and the environment. The strength of a t-post is rated by the amount of steel per foot. Regular t-posts are used for most applications, and typically weigh about 1.25 pounds per foot. Heavy-duty t-posts weigh around 1.33 pounds per foot and are generally used for high-pressure situations. For longevity, all t-posts are treated to prevent rust with either a coating of paint or galvanization for years of service.
Which side of the fence will endure the most pressure?
Determine if you are keeping animals in or predators out. The side of the fence that will endure the most pressure should be the side that the post studs face. When the fencing is challenged, the posts will help hold the wire in place, instead of allowing the wire to push away from the supports.
What is a T post?
T-posts are made of high-quality steel that holds up to pressure and the environment. The strength of a t-post is rated by the amount of steel per foot. Regular t-posts are used for most applications, and typically weigh about 1.25 pounds per foot.
Do crimps need to be crimped after installation?
Be sure the crimps in the fence remain after installation, as they are designed to adjust to varying temperatures. Building a fence with t posts, along with regular check-ups and routine maintenance will result in a safe, secure, and long-lasting enclosure for your animals.
Can animals climb wires?
Animals may attempt to raise the wires in order to slide underneath the fence, so clips at the bottom of the fence are essential. Do not over-stretch the wire; it should be taught but not ‘banjo tight’. Be sure the crimps in the fence remain after installation, as they are designed to adjust to varying temperatures.
Step 1 - Installation of The Post
Step 2 - Stringing The Barbed Wire
- In order to string the barbed wire, one can use a fence stretching tool which can be easily purchased from the market. One can begin the process of stringing the barbed wire from one post and take to another and this process needs to be repeated till the time all pots are covered. It should be kept in mind that a bit of negligence can result in an ...
Step 3 - Stretching of The Wire
- Once the basic stringing of barbed wire is done, it is important to stretch the wire. While stretching the wire, one should keep in mind that wire fencing should be tight and there should be no sagging of the barbed wire or else it will not serve its purpose in the best manner. Apart from this, one needs to add diagonal barbed wire as well to ensure more hurdle. This can be done in the same …