Washing
- Rinse the entire deck with water from the garden hose
- Douse your stamped concrete deck with a solution of dishwasher or any pH neutral detergent
- Spread the solution with a soft brush and let it sit for 10 – 15 minutes
- Scrub areas that look dirtier than other areas
- Rinse off with the garden hose. ...
Full Answer
How many rounds of stripper to get sealer off concrete?
What is the best way to remove acrylic sealer from concrete?
How does soda blasting work?
What is the process of removing sealer from concrete?
Can you strip sealer off stamped concrete?
Can you stain concrete after stripping?
Does chemical stripping remove color from concrete?
See 2 more
How many rounds of stripper to get sealer off concrete?
In many cases I have found that it takes two rounds of chemical stripper to get all the sealer off. Sometimes it even takes three rounds.
What is the best way to remove acrylic sealer from concrete?
The best method I know of for removing “acrylic sealer” from stamped concrete is using a product called Deco-Peel.
How does soda blasting work?
Soda blasting utilizes special high-pressure blasting equipment with commercial-grade baking soda granules as the blasting medium . Under high pressure, the baking soda granule is hard enough to break down the coating, but not hard enough to profile the concrete. The downsides are the dusty mess the process creates and the alkalinity of the baking soda dust and its effect on both plant life and landscaping.
What is the process of removing sealer from concrete?
Most mechanical processes for removing sealers and coatings involve grinding, scraping or blasting, all of which impact the concrete surface and tend to profile or scratch the surface.
Can you strip sealer off stamped concrete?
I have often said that stripping sealer from stamped concrete is one of the most miserable jobs I have experienced. The job of stripping any coating from concrete is hard enough, but add in the variations and texture of stamped concrete and the job becomes that much more difficult. The questions asked here are fairly common when the reality of having to strip old or failing sealer from concrete presents itself. The most important question, and most common, is whether the sealer should be removed with a chemical process or a mechanical one.
Can you stain concrete after stripping?
To answer the question about staining or color-treating the concrete after the sealer is chemically stripped, yes, you can. But only if you performed the stripping process well and completely removed the sealer and stripper residue.
Does chemical stripping remove color from concrete?
In regard to the other questions, chemical stripping should have no effect on the color or the concrete surface if the concrete was installed and stamped properly. The active ingredients in chemical strippers are designed to break down plastics and will have no effect on concrete. Depending on the type of colors or pigments used to provide secondary color highlighting and antiquing, the chemical strippers may remove some of those colors. In my experience when powder release was used to antique the concrete, chemical strippers had no effect, but if acrylic tints or post-applied antiquing colors or powders were used, the chemical stripper can remove some of the color.
What is the Cost to Stain Stamped Concrete?
ft. The easiest product to use to change stamped concrete color is our Antiquing Stain. The stain cost about $0.15 sq. ft. and a quality outdoor acrylic concrete sealer cost about $0.17 sq. ft. If you are hiring a contractor, prices will vary depending on where you live from $1.73 to $3.15 per sq. ft.
Why does stamped concrete fade?
If an adequate exterior seal is not properly maintained, all colored stamped concrete will fade over time due to direct exposure to the elements. Faded color is the #1 issue homeowners face with stamped concrete patios, and in Deborah’s case, when the selected color turns out differently than expected. Most concrete found outside is stamped or textured concrete that was Integrally Colored, Acid Stained on its surface, and sealed to prevent damage.
What is the best way to restore faded concrete?
Antiquing Stain is the most affordable solution for restoring faded concrete color. While there are several options for restoring your faded concrete color, these often require you to first determine what state the concrete sealer is in, and depending on the answer, there may be additional preparation or limitations.
How long does it take for antiquing to dry on concrete?
Let the first coat of stain dry completely before applying the second coats. Allow the final coat of antiquing stain to dry for a minimum 5-6 hours.
Can you apply antiquing to stamped concrete?
First, clean stamped concrete thoroughly. Antiquing stains can be applied over existing sealer.
Is concrete color permanent?
Faded concrete color results either from environmental exposure, or from failure to test and accurately assess existing surface conditions. Luckily, not all concrete color is permanent— learn how to recolor faded stamped concrete in 7 easy step with Direct Colors.
Can You Change The Color of Stamped Concrete?
Yes, depending on the desired final result, you may choose from various staining products. The product with which you choose to color your concrete should be based on an assessment of the concrete’s surface conditions and the degree to which you wish to change the color. Read How to Change the Color of Stained Concrete
What is a cure and seal remover?
Cure & Seal Remover from PROSOCO is a professional-grade product that’s specially formulated for concrete sealer removal.
Can concrete withstand UV damage?
October 3, 2019. Combined with the right sealer, concrete is able to successfully withstand UV and water damage, wear and tear associated with long-term use, abrasions, freeze-thaw cycles, and exposure to the elements.
Can you use muriatic acid to remove sealer from concrete?
The other method to remove sealer from a concrete floor or patio, or to remove concrete sealer of any type, is chemically. You have some variety of choice when it comes to which products you want to use. You may have heard that it is possible to use muriatic acid to etch your concrete surface. Unfortunately, muriatic acid is often used ...
Can you use a sealer on concrete?
A penetrating sealer for your concrete can give it long-lasting protection by altering its chemical makeup, reducing the need for reapplication. However, if concrete has been paired with a surface sealer, it will need to be reapplied occasionally based on the type of sealer used. Epoxies, for example, can last a lot longer than acrylics (or water-based sealers).
Can you use muriatic acid on concrete?
You may have heard that it is possible to use muriatic acid to etch your concrete surface. Unfortunately, muriatic acid is often used because it’s less expensive than professional products. However, using muriatic acid is not a wise idea because it can actually cause damage to the concrete surface and to people, pets and plants.
Can you strip concrete sealer before applying a new coat?
If you’re working with a concrete sealer that’s merely topical, at some point you’ll need to strip it away completely before you reapply a fresh coat. Products like PROSOCO’s Cure & Seal Remover penetrate deeply to completely remove all remnants of the old sealer, giving your new coat of sealer a fresh and clean surface to which it can adhere.
Why do you need stamped concrete?
Why stamped concrete? Stamped decorative concrete is an attractive and economical alternative to natural pavers or just plain poured concrete. A stamped concrete patio can give you the look and texture of a stone patio for a lot less money than the real thing; sometimes less than half the cost of the natural material alternatives such as slate
What are the advantages of stamped concrete?
Another major advantage to a stamped concrete patio is its general low maintenance. The pavers or stones won’t settle over time, which would allow sprouting plant growth in between material and create uneven surfaces. This is merely an overview, not a detailed process.
How much force do you need to tamp a concrete mat?
Workers 2/3: Tamps the mats as they are placed. Mats should be tamped straight down into the concrete using no more force than necessary with a quality 15-20 lb concrete stamp tamper to press the mat flush to the concrete. Do not over tamp!
Why use a floppy mat on concrete?
When reaching the edge of the slab and the last concrete stamp is going to hang off the edge, be sure to use the floppy mat because it is softer and will crush around the edge form and still imprint the concrete. Pre-texturing the perimeter of the slab will also help keep the edges consistent.
What to do if you have too few stamps?
If you have too few, you are going to make everyone’s life much harder when stamping. Always plan accordingly to ensure best results. Placing the Concrete: Follow normal procedures with a subgrade, and with concrete base that meets the planned specifications and local requirements for mix, depth and reinforcement.
How thick should concrete be for a concrete pour?
The concrete generally should be no less than four inches in thickness. Color Options: There are two basic techniques for coloring the concrete at the time of the pour. (Coloring post pour is touched on later) Integral Color: Liquid Color or powder color is placed into the ready mix truck.
How to check for notched stamps?
For notched or irregular stamp patterns, you can check alignment by using the edge form as a reference point (assuming that it’s square) and checking with a tape measure. Continue with mats on hand, leapfrogging the mats as they are removed and replaced in the concrete.
How to remove old sealer from concrete?
Alternatively, you can use a gel coating stripper with a mop or squeegee to take off the worn sealers from the concrete surface.
What to use to remove sealer from a drywall wall?
Apply xylene or another solvent-based stripper to remove the previous sealer.
What stripper to use to remove latex paint?
Caustic strippers tend to work well if you need to remove latex, alkyds, or enamel paint coatings from concrete.
Can concrete be scratched?
The concrete can be then etched by acid and neutralized, or it can be mechanically scratched to remove the old sealer. If you’re looking to replace the current sealer with the opposite base (replacing solvent-based with water-based for example or vice versa), the previous sealer will need to be removed no matter what.
Can you use water based sealer on concrete?
Water-based concrete sealers. Water-based sealers are a bit different, although they are by no means difficult. Instead of using xylene, products like Aqua Mix’s Sealer and Coating Remover can be used. The concrete can be then etched by acid and neutralized, or it can be mechanically scratched to remove the old sealer.
How to remove stains from stamped concrete?
1. Consider pressure washing outdoor surfaces. If water and mild detergent are not effective, you can use a pressure washer to remove tough stains from a stamped concrete surface. Pressure washing can help remove tire marks, leaf stains, and grease spots. Try renting a pressure washer at your local hardware store.
What do you use to clean concrete?
For general maintenance and cleaning, use a broom to swe ep debris up and mop the concrete if it’s just moderately dirty.
Can you mop stamped concrete?
In general, sweeping and wet mopping with water are sufficient for regular maintenance of a stamped concrete surface. You can also mop or pressure wash the surface with a mild detergent. Make sure you avoid using harsh chemical cleaners on stamped concrete surfaces. Steps.
How many rounds of stripper to get sealer off concrete?
In many cases I have found that it takes two rounds of chemical stripper to get all the sealer off. Sometimes it even takes three rounds.
What is the best way to remove acrylic sealer from concrete?
The best method I know of for removing “acrylic sealer” from stamped concrete is using a product called Deco-Peel.
How does soda blasting work?
Soda blasting utilizes special high-pressure blasting equipment with commercial-grade baking soda granules as the blasting medium . Under high pressure, the baking soda granule is hard enough to break down the coating, but not hard enough to profile the concrete. The downsides are the dusty mess the process creates and the alkalinity of the baking soda dust and its effect on both plant life and landscaping.
What is the process of removing sealer from concrete?
Most mechanical processes for removing sealers and coatings involve grinding, scraping or blasting, all of which impact the concrete surface and tend to profile or scratch the surface.
Can you strip sealer off stamped concrete?
I have often said that stripping sealer from stamped concrete is one of the most miserable jobs I have experienced. The job of stripping any coating from concrete is hard enough, but add in the variations and texture of stamped concrete and the job becomes that much more difficult. The questions asked here are fairly common when the reality of having to strip old or failing sealer from concrete presents itself. The most important question, and most common, is whether the sealer should be removed with a chemical process or a mechanical one.
Can you stain concrete after stripping?
To answer the question about staining or color-treating the concrete after the sealer is chemically stripped, yes, you can. But only if you performed the stripping process well and completely removed the sealer and stripper residue.
Does chemical stripping remove color from concrete?
In regard to the other questions, chemical stripping should have no effect on the color or the concrete surface if the concrete was installed and stamped properly. The active ingredients in chemical strippers are designed to break down plastics and will have no effect on concrete. Depending on the type of colors or pigments used to provide secondary color highlighting and antiquing, the chemical strippers may remove some of those colors. In my experience when powder release was used to antique the concrete, chemical strippers had no effect, but if acrylic tints or post-applied antiquing colors or powders were used, the chemical stripper can remove some of the color.
