Removing A Single Lever Danze Cartridge
- Turn off the water under your sink and open the faucet to relieve pressure.
- Plug your sink to prevent dropping any parts down the drain.
- Twist the handle to one side and you should be able to see a small cover plate that can be carefully removed with a knife edge or screwdriver.
How do you fix a two handle Danze kitchen faucet?
Two Handle Danze Faucet Repair 1 Shut off the water to the faucet, both hot and cold. 2 Plug the sink to prevent dropping any parts down the drain. 3 Knob type faucets will have a screw hidden beneath a cover plate that can be removed carefully with a knife or flat tipped screwdriver. More items...
How do you replace the handle on a Gerber faucet?
The handle for your faucet is either attached to the faucet, or to the cartridge. In order to remove and replace the handle, you will need to remove the set screw or threaded handle assembly. Specific instructions depend on the type of faucet and collection that you have. Gerber handles fall into 4 main categories.
When should I replace the cartridge in my Danze faucet?
If your faucet is leaking or you are experiencing poor water flow, you will most likely have to replace the cartridge. The cartridge in a single-lever Danze faucet is stored under the cover plate below the handle. If you have a two-handle Danze faucet, you will need to remove both handles to access the cartridge.
How do you remove a Danze single lever cartridge?
Removing A Single Lever Danze Cartridge 1 Turn off the water under your sink and open the faucet to relieve pressure. 2 Plug your sink to prevent dropping any parts down the drain. 3 Twist the handle to one side and you should be able to see a small cover plate that can be carefully removed with a knife edge or screwdriver. More items...
How do you disassemble a Danze faucet?
Handle type 1:Pull out the rubber button located on the bottom of faucet handle.Use a hex wrench (part #1) to unscrew counter-clockwise to loosen the set screw. The hex wrench is 2.5 mm head or 1/8".Then pull out the main handle (part #2). If still hard to be pulled away, loosen the set screw again.
How do I remove a Danze faucet cartridge?
In order to remove and install a cartridge, you will need to:Turn the water supply off to the faucet.Remove the handle.Remove the cartridge.Install the new cartridge.Test for leaks.
How do I fix a leaky Danze kitchen faucet?
0:543:00How to Fix A Dripping or Leaky Single Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd ball note how the holes in the ball line up with the faucet body use a small screwdriver toMoreAnd ball note how the holes in the ball line up with the faucet body use a small screwdriver to remove the seats and springs to repair leaks at the base slide off the spout. Then replace the o-rings.
How do I take my faucet apart?
0:052:51How to Remove a Faucet Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn this case they're hidden beneath these decorative caps which can be pried off with a knife. OnceMoreIn this case they're hidden beneath these decorative caps which can be pried off with a knife. Once the screws are exposed. They can be removed with the screwdriver. By turning them counterclockwise.
How do you remove a Danze kitchen faucet spout?
Danze - Spout Removal for D401144, D401544, D404244 and D401542Uninstall the faucet from the sink.Then, look from the bottom of the faucet body to locate the 2 screws.Untighten screws with a Philips-head screwdriver.Remove spout from the faucet body to reach to the spray diverter.
How do you take apart a faucet head?
0:573:35Removing Hard Water Deposits From A Faucet Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipCounterclockwise. When the connector is undone I'll place the rubber o-ring onto the counter. So IMoreCounterclockwise. When the connector is undone I'll place the rubber o-ring onto the counter. So I don't lose it then I'll take some duct tape and secure the pullout hose to the spout.
How do you take apart a single handle faucet?
0:182:44Repairing a Leaky Single Handle Ball-Type Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis may require using an Allen wrench to loosen the handle. There may be a button that covers theMoreThis may require using an Allen wrench to loosen the handle. There may be a button that covers the screw that needs to be removed first and then you can loosen the screw and remove the lever handle.
How do you take apart a kitchen faucet?
2:3712:21How to Replace a Kitchen Faucet With a Single Handle | The Home DepotYouTubeStart of suggested clipEnd of suggested clipOn these faucets there's a separate supply line that connects between the spout. And a side sprayer.MoreOn these faucets there's a separate supply line that connects between the spout. And a side sprayer. You'll need to disengage this connection before you can remove the faucet.
How do you fix a faucet that is leaking from the neck?
Screw the neck back on the base of the faucet and tighten it with your bare hands. Make sure it is tight but not too compressed. So use your bare hands. You want the O-ring to be able to seal off the faucet base as to not cause any leakage but not so much so that you are unable to unscrew them again.
How do you remove a screwless faucet handle?
Once you find the necessary tools, you'll need to follow these steps to remove the screwless faucet handle successfully.Step 1: Turn off the water. ... Step 2: Remove the cap on top of your faucet. ... Step 3: Remove the hidden set crew. ... Step 4: Remove the faucet handle. ... Step 5: Rinse off mineral deposits.
How do you take apart a two handle faucet?
1:084:49How to Repair a Leaky Two-Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou will need to remove it by using a wrench to rotate it in the off direction until it threads outMoreYou will need to remove it by using a wrench to rotate it in the off direction until it threads out entirely. Once removed you'll need to take your stem to your local retailer.
How do you remove the screen from a sink faucet?
0:311:47How to Unclog a Faucet Aerator For Dummies - YouTubeYouTubeStart of suggested clipEnd of suggested clipUntil it separates from the faucet. Third take the cap off. You'll want to pay attention to the wayMoreUntil it separates from the faucet. Third take the cap off. You'll want to pay attention to the way the inserts are arranged because you have to replace these parts in the same sequence.
How do you change a faucet cartridge?
1:293:02How to Replace Leaky Cartridges in a Bathroom Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipScrewdriver. Now use a Philips screwdriver to unscrew and remove the handles from the cartridge. UseMoreScrewdriver. Now use a Philips screwdriver to unscrew and remove the handles from the cartridge. Use a crescent wrench to remove the bonnet nut from the cartridge. Once the nut is off remove the
Does Danze faucets have a lifetime warranty?
Danze - Limited Lifetime Warranty - Kitchen Faucets - Kitchen - The Home Depot.
How do you replace a Danze shower diverter?
The diverter can now be removed. To do so, use a pair of adjustable pliers to remove the retainer nut. Turn counter-clockwise to remove it....To replace the diverter, you must:Remove the old diverter.Install the seat and spring on the diverter.Install the new diverter.Test for leaks and re-install the faceplate.
How do you remove a Danze Sirius shower handle?
Danze - How to remove Sirius handle?Pull out the rubber button (on the bottom of part #2).Use a hex wrench (part #1) to unscrew counter-clockwise to loosen the set screw. The hex wrench is 2.5 mm or 1/8".Pull out the main handle (part #2). If still hard to be pulled, loosen the set screw again.
How to stop a Danze faucet from leaking?
If a Danze faucet is leaking from the handle, all you should have to do to stop the leak, according to the Danze website, is tighten the valve retaining nut. This may also stop leaking from the spout.
What is a Danze faucet?
Lower-end Danze faucets feature either ball-style or ceramic disk valves. The more expensive ones are almost exclusively equipped with ceramic disk valves, which are among the best you can find. They are precisely engineered to provide accurate flow, and they seldom leak.
What is a Danze Sirius?
The Danze Sirius line of bathroom, kitchen and shower faucets features the most unusual handle design, and unless you've consulted the Danze faucet repair instructions for that model, it might baffle you. Danze Sirius shower handle removal, like the removal of the handle from a Sirius sink faucet, is actually quite simple, though.
What is the difference between a ball valve and a Danze faucet?
Lower-end Danze faucets feature either ball-style or ceramic disk valves. The more expensive ones are almost exclusively equipped with ceramic disk valves, which are among the best you can find. They are precisely engineered to provide accurate flow, and they seldom leak. Ball valves, on the other hand, aren't quite as sophisticated and are more likely to leak.
Why does my Danze faucet leak?
Danze Faucet Cartridge Replacement. When a ceramic disk leaks, it's usually because scale or some other debris has scratched the ceramic. This type of damage can't be repaired, so you have to replace the cartridge. It's best to have the new cartridge in hand before you take apart the faucet.
Does Danze Sirius have a handle?
The Danze Sirius line of bathroom, kitchen and shower faucets features the most unusual handle design, and unless you've consulted the Danze faucet repair instructions for that model, it might baffle you. Danze Sirius shower handle removal, like the removal of the handle from a Sirius sink faucet, is actually quite simple, though.
Is Danze a Moen faucet?
Image Credit: jodiejohnson/iStock/GettyImages. Danze isn't as well-known in the faucet industry as Moen or Delta, but its parent company, Gerber Plumbing Fixtures, has been in business longer than either of these two competitors. Gerber and Danze faucets occupy different ends of the price spectrum. Whereas Gerber faucets are primarily utilitarian, ...
What to do if a faucet leaks?
If there is a leak around the edges of the faucet or handle, apply silicone sealant.
What is a Danze wrench?
Adjustable wrench. Danze manufactures more than 20 different lines of toilets, vanities, faucets, showerheads and bath accessories. Its designs tend to have high-luster finishers, brass tubing and fittings, and durable ceramic handles.
