Use a long flat head screw driver, and insert it in the small opening in the region were the outtube connects to the reel spoke. Pulling on the tabs with the flat head screwdriver blade will release two small but hidden tabs just behind the intube. Pulling on the intube while pulling on the tab with the screw driver will release the intube.
Full Answer
How to fix a broken reel hose?
If it cannot be tightened because the part the screws tighten in to are cracked/broken you can drill deeper hose and use longer screws/ or you can disassemble the reel and flip end for end as the reel halves are mirror images and there is second receiver for the flange with the out let for the hose.
Why does my suncast hose reel keep getting tangled?
I have a Suncast smt200b hose reel. The hose keeps getting tangled. Why? If it is leaking near where the garden hose connects to the spool that the hose is stored upon then the 4 screws that hold the flange with the outlet for the garden hose has loosened and needs tightened up.
How do I winterize my hose reel?
Drain the hose reel prior to the onset of freezing temperatures. If any trapped water freezes, it may cause damage to the hose reel, hose, and even your pipes. Store the entire unit—including hose reel and hose—inside your garage or storage shed at above-freezing temperatures.
When should I put away my hose reel?
When temperatures start to drop, it’s just as important to put away your hose reel as your outdoor furniture—especially if you live in a cold weather state. Drain the hose reel prior to the onset of freezing temperatures. If any trapped water freezes, it may cause damage to the hose reel, hose, and even your pipes.
Why does my Suncast hose reel leak?
Depending on usage and water hardness, the in-tube and out-tube connection may become worn and start to leak. Check that all connections are tight. If the hose reel still leaks, replacement of the in-tube and out-tube may be necessary. Contact us at www.Suncast.com or call 1-800-846-2345.
How do I remove the hose from my hose reel?
1:294:02Inlet Hose Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we want to loosen that by turning it counterclockwise. And just keep unscrewing that until itMoreSo we want to loosen that by turning it counterclockwise. And just keep unscrewing that until it comes free from the axle. Okay. And then once it's free you pull it straight away from the reel.
How do you retract a retractable hose reel?
Step-by-StepBefore retracting the hose turn off the tap.Tug the hose to retract.Slowly walk the hose back.Pull the lever on the hose gun to release water pressure.
How do you assemble a hose reel?
0:102:57How to: Assemble the Handy Hose Reel - YouTubeYouTubeStart of suggested clipEnd of suggested clipLine up the real support clips with the recesses on the drum plate and firmly press down until theyMoreLine up the real support clips with the recesses on the drum plate and firmly press down until they click into place this creates the real drum.
How do you disassemble a hose?
Heat water to boiling and pour it over the outer ring on the stuck hoses. The hot water should expand the metal of the outer ring enough to loosen the hose ends. Grasp the newly expanded hose ends with pipe wrenches and loosen gently.
How do you remove a hose attachment?
Buy a cheap torch, heat up the nozzle where it attaches to the hose. It should expand allowing you to twist off. Be careful of heating too much....don't want to melt hose etc. Have pliers handy for the twisting- 2 pairs, one for hose side, one for nozzle side.
How does a retractable hose reel work?
Spring driven hose reels have a spring mechanism that retracts the hose automatically. As the hose is unwound, the tension on the spring builds and is stored. When the job is done and the tension is released, the hose retracts to the reel.
Why is the nozzle locked into the hose reel assembly?
Fire Hose reels consist of a length of non-kinking tubing. They are permanently connected to a water supply and consist of a main turn on/off valve, a hose guide, and a hose with a nozzle. The control nozzle attached to the end of the hose enables the operator to control the direction and flow of water to the fire.
How do you clean a hose reel?
0:030:24Hoselink Insider Tips - How to quickly clean your hose | #3 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf your hose is a bit grubby or you need to remove some mud simply take a towel or cloth. And holdMoreIf your hose is a bit grubby or you need to remove some mud simply take a towel or cloth. And hold it over the hose as it retracts back in to clean it off.
How do you remove a Hozelock connector?
0:080:56How to remove a Hoselink Hose End Connector from your Hose - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the fitting into boiling. Water this will help soften the hose after 45 seconds put theMorePlace the fitting into boiling. Water this will help soften the hose after 45 seconds put the fitting in between your feet like this and pull the hose in an upward motion.
How do you install a water hose holder?
4:006:24How to install Lowes garden hose wall mount - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure that the plate itself goes on and the screws rest in these cutout inserts on the plateMoreMake sure that the plate itself goes on and the screws rest in these cutout inserts on the plate screws are secure. And again. I put it in the mortar.
How do you attach a hose reel to the wall?
2:053:46How to install a HOSE REEL - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you have to do is insert your hose reel onto the bracket. And it is that simple to install aMoreAll you have to do is insert your hose reel onto the bracket. And it is that simple to install a hose wheel.
How do you change the hose on a Hozelock Auto Reel?
2:559:45Change the Hose on a Hozelock 40m Wall Mounted Fast Reel | InstructionsYouTubeStart of suggested clipEnd of suggested clipThe next thing we're going to do is remove this cover plate with the three self-tapping screws thatMoreThe next thing we're going to do is remove this cover plate with the three self-tapping screws that you can see there with the three screws removed we can then remove the cover plate.
How do you remove a Hozelock hose?
0:080:56How to remove a Hoselink Hose End Connector from your Hose - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the fitting into boiling. Water this will help soften the hose after 45 seconds put theMorePlace the fitting into boiling. Water this will help soften the hose after 45 seconds put the fitting in between your feet like this and pull the hose in an upward motion.
How do you open a Hoselink reel?
Retracting the hose To unlock the hose, give the hose a small tug to start retraction. If you pull the hose too far, it will lock again rather than start to retract. To shorten the hose, start retraction then once at the desired point, stop and walk back out a little to lock it at the new length.
What is a leader hose?
Hose reel leader hoses are short hoses that connect the hose reel inlet and the source of supply to prevent misalignment and binding. These hoses are also known as lead-in hoses or air leader hoses, and are necessary connections to hose reels.
When to put away hose reel?from suncast.com
Drain the hose reel prior to the onset of freezing temperatures. If any trapped water freezes, it may cause damage to the hose reel, hose, and even your pipes.
What to do if your hose reel is broken?from gardenmoz.com
Your hose reel can get a leak, so you can buy a garden hose kit to fix that problem. If some of the parts of the reel are broken, try to change it.
Why is my garden hose reel not working?from doityourself.com
The most common problems with garden hose reels are due to improper joint seals. The female end of hoses and other connectors require a small flat washer that is notorious for becoming lost. Additionally, these washers become compressed over time, and no longer function as well as they should.
Why is it important to choose a hose reel?from gardenmoz.com
Choosing your hose reel is very important for your gardening success. You might damage your garden hose when storing it with a low-quality hose reel.
How to reuse discharged water?from suncast.com
Some suggestions for reusing discharged water: Run the drain hose into landscaping for carefree watering. Direct the drain hose into a watering can to water flower pots and window boxes. Capture the water into a pot and use it for outdoor cleaning.
What is the best way to fix a leaking connector?from gardenmoz.com
Mainly the leaking problems start with the connectors. You can fix the connectors easily with the Self-Fusing Silicone Tape. The tape is very effective for the connector issues.
What happens if a hose is not aligned?from suncast.com
Check for cross threading: If the threads on the hose are not aligned with the in-tube or out-tube when screwed together, it can damage the threads and cause leaks. Be careful to align the threads when connecting your hose, and call Customer Service for more information (1-800-846-2345). Connections to Check:
When to put away hose reel?from suncast.com
Drain the hose reel prior to the onset of freezing temperatures. If any trapped water freezes, it may cause damage to the hose reel, hose, and even your pipes.
How much water does a Suncast hose rewind use?from suncast.com
Suncast automatic rewind units use water pressure to automatically rewind your hose for you. During each rewind, the units discharge about 4-6 gallons of water that you can recycle and use throughout your yard.
How much less rubber hose does a hose reel hold?from suncast.com
On average, a hose reel holds 25% less rubber hose than vinyl.
How to reuse discharged water?from suncast.com
Some suggestions for reusing discharged water: Run the drain hose into landscaping for carefree watering. Direct the drain hose into a watering can to water flower pots and window boxes. Capture the water into a pot and use it for outdoor cleaning.
What happens if a hose is not aligned?from suncast.com
Check for cross threading: If the threads on the hose are not aligned with the in-tube or out-tube when screwed together, it can damage the threads and cause leaks. Be careful to align the threads when connecting your hose, and call Customer Service for more information (1-800-846-2345). Connections to Check:
What is the diameter of a hose?from suncast.com
Hose Diameter. Standard hose is 5/8" diameter, although contractors often use 3/4" diameter hose because it can deliver more water. Coupling. There is a connector at each end of the hose that attaches to the water source, hose accessory, or another hose. Specialty Hoses.
Where to store hose reels?from suncast.com
Store the entire unit—including hose reel and hose—inside your garage or storage shed at above-freezing temperatures.
When to put away hose reel?from suncast.com
Drain the hose reel prior to the onset of freezing temperatures. If any trapped water freezes, it may cause damage to the hose reel, hose, and even your pipes.
How much water does a Suncast hose rewind use?from suncast.com
Suncast automatic rewind units use water pressure to automatically rewind your hose for you. During each rewind, the units discharge about 4-6 gallons of water that you can recycle and use throughout your yard.
How much less rubber hose does a hose reel hold?from suncast.com
On average, a hose reel holds 25% less rubber hose than vinyl.
How to reuse discharged water?from suncast.com
Some suggestions for reusing discharged water: Run the drain hose into landscaping for carefree watering. Direct the drain hose into a watering can to water flower pots and window boxes. Capture the water into a pot and use it for outdoor cleaning.
What happens if a hose is not aligned?from suncast.com
Check for cross threading: If the threads on the hose are not aligned with the in-tube or out-tube when screwed together, it can damage the threads and cause leaks. Be careful to align the threads when connecting your hose, and call Customer Service for more information (1-800-846-2345). Connections to Check:
What is the diameter of a hose?from suncast.com
Hose Diameter. Standard hose is 5/8" diameter, although contractors often use 3/4" diameter hose because it can deliver more water. Coupling. There is a connector at each end of the hose that attaches to the water source, hose accessory, or another hose. Specialty Hoses.
Where to store hose reels?from suncast.com
Store the entire unit—including hose reel and hose—inside your garage or storage shed at above-freezing temperatures.
When to put away hose reel?
Drain the hose reel prior to the onset of freezing temperatures. If any trapped water freezes, it may cause damage to the hose reel, hose, and even your pipes.
How much water does a Suncast hose rewind use?
Suncast automatic rewind units use water pressure to automatically rewind your hose for you. During each rewind, the units discharge about 4-6 gallons of water that you can recycle and use throughout your yard.
How much less rubber hose does a hose reel hold?
On average, a hose reel holds 25% less rubber hose than vinyl.
How to reuse discharged water?
Some suggestions for reusing discharged water: Run the drain hose into landscaping for carefree watering. Direct the drain hose into a watering can to water flower pots and window boxes. Capture the water into a pot and use it for outdoor cleaning.
What happens if a hose is not aligned?
Check for cross threading: If the threads on the hose are not aligned with the in-tube or out-tube when screwed together, it can damage the threads and cause leaks. Be careful to align the threads when connecting your hose, and call Customer Service for more information (1-800-846-2345). Connections to Check:
What is the best hose material?
Vinyl. The most popular with homeowners, this hose is lighter weight, easy to use, and very versatile. For best results, use a 5/8" standard vinyl hose. Rubber. A heavier-duty and longer-lasting hose often used by contractors. On average, a hose reel holds 25% less rubber hose than vinyl.
What is the diameter of a hose?
Hose Diameter. Standard hose is 5/8" diameter, although contractors often use 3/4" diameter hose because it can deliver more water. Coupling. There is a connector at each end of the hose that attaches to the water source, hose accessory, or another hose. Specialty Hoses.
How many people can lift a Suncast?
Ask them direct what the weight is based on the model that closest matches yours. By the looks of it, 2 people could lift it with straps underneath. https://www.suncast.com/outdoor-storage/sheds.html ..
Can I paint the exterior of my Suncast storage shed?
With paint for the type of material and surface preparation and priming .
