Most Cub Cadets use a 15 by 6 wheel. However, models may vary in size, so check your user manual first if you need to replace or upgrade your front wheel. Once the wheel is off, let any remaining air out of the tire by removing the air valve and applying pressure. Then, break the tire bead and pry the tire off the wheel rim one side at a time.
Full Answer
What do you do with the front wheels on a Cub Cadet?
The front wheels of your Cub Cadet riding tractor often require removal when replacing a worn or damaged tire, worn wheel bearing or tire valve stem. The riding tractor front wheels are held onto the front axle shaft by a flat washer and cotter pin.
How do I change the rear tire on my Cub Cadet XT1?
Here’s how to change the rear tire on your Cub Cadet XT1 Tractor. For this project start by taking the plastic cap off the rear tire. You can use a small screwdriver to do this, or a similar tool to place right behind the plastic cap and pop it off.
How to remove a tire from a Cub Cadet 1045?
How to Remove a Tire from a Cub Cadet 1045. 1 Step 1. Park the lawnmower on a hard, level surface. 2 Step 2. 3 Step 3. 4 Rear Tire Removal. 5 Step 1. More items
What size tire does a Cub Cadet use?
Most Cub Cadets use a 15 by 6 wheel. However, models may vary in size, so check your user manual first if you need to replace or upgrade your front wheel. Once the wheel is off, let any remaining air out of the tire by removing the air valve and applying pressure.
See more
How do you take the front wheel off a Cub Cadet lawn mower?
To remove the front wheel the flexible center hub cap must first be removed . Using a flat-bladed screw driver, or similar flat-edged tool, gently pry up on the outer lip (edge) of the hub cap until it becomes free.
How do you remove a front lawn mower tire?
1:084:57How to Replace the Front Wheels on Your Riding Lawn Mower - YouTubeYouTubeStart of suggested clipEnd of suggested clipPin then just use a hammer and tap on the pliers. Until you get it all the way. Out. Then there is aMorePin then just use a hammer and tap on the pliers. Until you get it all the way. Out. Then there is a washer that needs to be removed. And then you can go ahead and slide off your wheel.
How do you remove a front tractor tire?
0:276:17Changing the Front Tire on a Ford Tractor - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace at least one jack stand under the frame just to be safe remove all the nuts. And you should beMorePlace at least one jack stand under the frame just to be safe remove all the nuts. And you should be able to just wiggle the wheel off the hub.
How do you take the wheels off a riding lawn mower?
0:223:29How to change a ride on mower wheel - YouTubeYouTubeStart of suggested clipEnd of suggested clipLike so let me move the washer. And then the wheel will pull straight. Off. If it doesn't pull offMoreLike so let me move the washer. And then the wheel will pull straight. Off. If it doesn't pull off like oh it's a good idea to put some spear penetrance on there. Well then just give that a. Square.
How do you change a front wheel on a riding lawn mower?
0:425:02HOW-TO Replace Lawn Tractor Front Wheel Bushings - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd remove the washer. There might be two washers in some cases. Now just remove the wheel. AndMoreAnd remove the washer. There might be two washers in some cases. Now just remove the wheel. And there's two bushings in total one on each side of the rib.
How do I change a lawn mower tire?
1:112:32Replacing a Front Tire on a Riding Lawn Mower - YouTubeYouTubeStart of suggested clipEnd of suggested clipReinstall the valve stem core fill the tire fully with air reinstall the valve stem cap insert theMoreReinstall the valve stem core fill the tire fully with air reinstall the valve stem cap insert the back washer on the axle. Slide the wheel on the axle.
How do you change a tractor tire by hand?
0:2514:00How to Replace a Lawn Tractor Tire ~ Rick's Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is 15 by 6 inch tire it's one of the small ones up in the front I'm gonna be doing this withMoreThis is 15 by 6 inch tire it's one of the small ones up in the front I'm gonna be doing this with basic hand tools and a very crowded as you can see a very crowded work bench space here.
How do you change a tubeless tractor tire?
2:5614:15How to Change a Lawn Mower Tire | Tubeless Tire Change - YouTubeYouTubeStart of suggested clipEnd of suggested clipI have done this several times using flat tip screwdrivers. You can get in there with a few of themMoreI have done this several times using flat tip screwdrivers. You can get in there with a few of them it does work you got to be really careful you don't damage the tire if you're going to attempt.
How do you take the front wheel off a John Deere lawn tractor?
1:164:48How to remove a wheel from a John Deere lawn tractor using basic toolsYouTubeStart of suggested clipEnd of suggested clipAnd some light tapping from the backside. Really wasn't too bad but I decided for some reason cameMoreAnd some light tapping from the backside. Really wasn't too bad but I decided for some reason came out a lot harder than the other side and yours might be even more difficult but you'll get it.
How do you change a tire on a Cub Cadet riding lawn mower?
3:356:47How To Change the Tires on a Cub Cadet XT1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipOut need a pair of needle nose going to bend the cotter pin straight so you can get it back through.MoreOut need a pair of needle nose going to bend the cotter pin straight so you can get it back through. The axle remove the cotter pin.
How do you lift a lawn mower by yourself?
0:592:04Do It Yourself Service Tips : How to Safely Lift a Lawnmower - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the easiest way to do this if you're at home just find something to tilt it back with either aMoreSo the easiest way to do this if you're at home just find something to tilt it back with either a fence or a porch simply tilt your lawn mower back.
How do you jack up a riding lawn mower?
0:361:43How to Safely Lift and Service a Lawn Tractor Mower with This Side-Lifting ...YouTubeStart of suggested clipEnd of suggested clipContinue raising the lift arm until the safety latch drops into position insert the safety bar atMoreContinue raising the lift arm until the safety latch drops into position insert the safety bar at the end of the lift arm then lower the jack slightly to fully engage the safety latch.
How do you take the front wheel off a Husqvarna?
1:022:31Husqvarna YTH24V54 How To Remove And Replace The Front ...YouTubeStart of suggested clipEnd of suggested clipAnd all you really need to take them off with up it's not broke as a straight screwdriver you canMoreAnd all you really need to take them off with up it's not broke as a straight screwdriver you can kind of go up under them and pry them off like up in here.
How do you change a tubeless lawn mower tire?
3:0814:15How to Change a Lawn Mower Tire | Tubeless Tire Change - YouTubeYouTubeStart of suggested clipEnd of suggested clipI have done this several times using flat tip screwdrivers. You can get in there with a few of themMoreI have done this several times using flat tip screwdrivers. You can get in there with a few of them it does work you got to be really careful you don't damage the tire if you're going to attempt.
How do you jack up a riding lawn mower?
How to Jack Up Your Lawn MowerDrive the lawn mower to a flat and open area. ... Slide the hydraulic jack underneath the riding lawn mower, near the appropriate tire. ... Center the hydraulic jack underneath the guard. ... Crank the hydraulic jack handle to lift the lawn mower.
How do you change the front wheel on a Craftsman riding lawn mower?
4:278:46How to Repair a Lawn Tractor Tire Video: Help from Sears PartsDirectYouTubeStart of suggested clipEnd of suggested clipSlide the jack stand under the front axle to support the tractor. And then remove the jack. NextMoreSlide the jack stand under the front axle to support the tractor. And then remove the jack. Next remove the hub cap clip ring and washers from the wheel.
How does a Cub Cadet front wheel work?
You must lift the front end of the Cub Cadet riding tractor so you can slide the front wheel off the axle shaft.
How to remove the hub cap from a front wheel?
Pry the front wheel center hub cap gently from the front wheel hub with a flat-head screwdriver. Pry upwards on the outer edge, working around the hub until the hubcap pops free from the center hub.
How to pull a cotter pin?
Pull the cotter pin from the hole in the front axle shaft with needle-nosed pliers.
How to secure a jack stand?
Slide the jack stand holding arms upward until the the arms touch the underside of the front axle. Push down on the jack stand locking handle to secure the jack stand, locking the jack stand holding arms in place.
Can you pry the hubcap off a front wheel?
Pry the front wheel hub cap from the front wheel gently; prying too hard on the hubcap will damage the cap, requiring a replacement hubcap. A former cake decorator and competitive horticulturist, Amelia Allonsy is most at home in the kitchen or with her hands in the dirt.
What is Cub Cadet lawn tractor?
Image Credit: Jupiterimages/BananaStock/Getty Images. Cub Cadet lawn tractors are known for their reliability and toughness, but the part that takes the most pounding are the wheels. It can't be helped, since they are being driven around on lawns to cut grass, and any type of foreign object they run over, from rocks to branches ...
How to lubricate a tire?
You may need blunt tools to help you, and you should wear gloves to protect your hands. To make this easier, you can use liquid detergent diluted in water to lubricate the tire. Then, repeat on the other side. Fill the tire with air, which will seat the tire bead, and secure the new tire onto the rim. Once it is mostly full (but still somewhat soft), reinstall the valve stem core and then fill the tire the rest of the way and seal the valve with the cap.
Where to put a jack on a Cub Cadet?
As with a larger vehicle, place your jack under the center rear of the mower to get started with Cub Cadet rear tire removal. When you do so, make sure that the jack will come into contact with a solid part of the mower's frame to avoid tearing off parts of the riding mower's body or damaging more delicate components.
How to keep tires off the ground when lowering a jack?
Raise the vehicle until the tires are no longer touching the ground and then place jack supports to the right and left of the jack at a suitable height to keep the tires off the ground before lowering the jack.
How are rear axle tires secured?
The rear axle's tires are secured with a hubcap and a 5/16-inch hex bolt. Be careful when removing the hubcap, as it is held in place by molded internal extrusions gripping the large, flat washer below.
What engine does a Cub Cadet 1045 have?
The Cub Cadet 1045 lawnmower features a 20-horsepower Kohler engine and a 46-inch quick-attach mower deck. As the machine ages, the tires will start to wear, crack and leak. If the leak is on the side wall, it must be replaced.
How to raise front tire on a bike?
Place a jack under the front of the frame between the two front tires and raise the front. Place jack stands under the frame in front of each front tire. Slowly lower the jack until the frame rests on the stands.
How much pressure to put on a 20 x 10 x 8 tire?
If you find that the tire has been damaged beyond repair, you will need a new 20 x 10 x 8-inch tire, which should be inflated to a pressure of approximately 10 pounds per square inch.
Can you repair a Cub Cadet LT1045?
Riding mowers, like the Cub Cadet LT1045, are a great help when managing medium to large lawns and properties, but when something goes wrong, repairs can be expensive. Performing repairs on your Cub Cadet yourself, like Cub Cadet rear tire removal and repair, can keep costs low and get you back on track quickly. When something goes wrong with your Cub Cadet riding lawn mower's tires and wheels, simply removing the wheel can make working on it so much easier.
How to remove a tire from a can?
Press the button on top of the can while holding it in an upright position until you no longer see the product traveling through the clear hose into the tire. Pull the locking collar back and remove it from the valve stem.
How to get a flat tire off the ground?
Insert a jack under the axle near the flat tire and raise it so the tire is off the ground a few inches. Loosen and remove the lock nut on the flat tire's axle with an adjustable wrench. Pull the axle outward and the tire and two spacers will drop free.
How to inflate a lawn mower tire?
Drive the lawn mower slowly for a few minutes to distribute the tire inflator, if the tire rim is off the ground. Otherwise, add air from an air compressor to inflate the tire to between 20 and 25 psi and then drive the mower to distribute the tire inflator. Replace the valve cap and tighten it clockwise.
How much air do I need to inflate a lawn mower tire?
Otherwise, add air from an air compressor to inflate the tire to between 20 and 25 psi and then drive the mower to distribute the tire inflator. Replace the valve cap and tighten it clockwise.
How to repair a tire with a rubber plug?
Insert the small tip of a rubber tire plug from a tire repair kit into the eye of the needle tool. Insert the needle with the plug into a marked hole until it has about two-thirds of its length inside the tire.
How to get plug out of tire?
Pull the needle tool straight out without turning or twisting it to deposit the plug in the hole. Trim off excess plug on the outside of the tire with scissors.
How to prevent tire from leaking?
Keep valve stem caps on tires tight to prevent slow leaks. Remove debris and loose grass before mowing an area. Loose leaves and other objects reduce the traction from the rear tires. Tire plug kits are available at automotive, home improvement and hardware stores.
How to park a Cub Cadet?
Parking your Cub Cadet on a flat, level surface. Turn the engine off and allow it to cool. Remove the ignition key, disconnect the spark plug ignition wire to prevent accidental starting, and engage the parking brake.
How to put a rear tire back on a tractor?
To put the rear tire back on, the valve stem side should face away from the tractor or face towards the outside. When putting the tire back on, the rim has an oval shape to it, and you want that to line up with the axle shaft. If you look at the axle shaft, it has that same shape.
How to reinstall a cotter pin?
To reinstall a new cotter pin, just slide it all the way through the axle, take your needle nose and bend the cotter pin back over. Reinstall the plastic cover, just push it straight on until it clicks.
How to tighten a tire bolt?
We recommend putting a little bit of blue Loctite on your bolt just to keep it in place for you. Put the big washer on the bolt and thread it in by hand. Once you get a couple threads on it, hit it with the impact to tighten it down.
How to get a cotter pin off a tire?
Use a pair of needle nose pliers to bend the cotter pin straight so you can remove it and get it back through the axle. There is a metal washer behind the cotter pin, remove that, and the tire should slide right off. Inside the tire there are plastic bushings.
How big is the bolt on a tire?
Once you get the plastic cap off on the inside of the tire, there is a single bolt, it’s a 13 millimeter. Take that bolt out. That bolt is going to come out with a bigger washer and the single washer that’s on the nut.
Where is the plastic cover on a Weingartz tire?
There is a plastic cover that’s on the very front of the tire. Use a small flathead screwdriver to pry that off. Again, a lot of these plastic caps are maybe a one-time use. Inspect the cover once you get it off, if it’s damaged you can get a new one from Weingartz.
How to fix a leaky tire?
Common solutions to correcting a leaky tire include: 1 Patching a leaky tire with a tire patch or plug. 2 Installing a tire tube inside the tire. 3 Installing a professional tire sealant. 4 Replacement of defective fill valve. 5 Replacement of damaged tire and/or rim.
What does it mean when a tire leaks air?
If a tire repeatedly leaks air over a short period of time, there is likely a leak. It could be a puncture in the tire itself, a leaky rim seal, or even a defective tire fill valve.
Can you reseal tubeless tires?
The re-sealing of a tubeless tire to the wheel rim should be done by an experienced professional equipped with proper specialized tire service tools to perform this procedure. Please utilize the Authorized Service Center Directory for assistance with this service.