Screw the NODE rear body back onto the front half. NOTE: Verify that the seal marker on the rear half of the NODE lines up with the front half, ensuring that a proper seal is created. The NODE uses one or two standard nine-volt batteries (not included) to operate the valves and program the controller.
Full Answer
What are the capabilities of a hunter node Program?
Node Program Capablities. The NODE uses standard Hunter controller programming with 3 programs (A, B, C) and 4 start times per program. Node Buttons and Navigation. On standard Hunter controllers a dial is used to scroll between the programming functions, however, on the NODE the button is used to quickly and easily create the irrigation program.
How do I program the node?
To turn the Node display on, hold any button down. Use the arrow buttons to navigate through the settings, the plus and minus buttons to adjust a given option, and the center button to change the page or advance to the next feature. The NODE uses standard Hunter controller programming with 3 programs (A, B, C) and 4 start times per program.
What is the Hunter Node 2 station battery-operated controller?
The Hunter NODE 2 station battery-operated controller is designed to provide a user-friendly experience. The controller faceplate consists of a small but bright LCD display for easy recognition of programs, start times, and zone indication.
What is the difference between the node-200 and Node 2?
The NODE-200 is compatible with the Hunter solar panel kit which removes the need for battery operation by replacing the power source with a maintenance-free solution. The NODE 2 station battery-operated controller includes the controller body as well as a plastic mounting device.
How do I run a hunter node test?
0:061:14NODE: Turn on stations manually - YouTubeYouTubeStart of suggested clipEnd of suggested clipLike all hunter controllers the note allows you to turn on stations manually to start a stationMoreLike all hunter controllers the note allows you to turn on stations manually to start a station manually from the node controller. Simply hold down the right arrow to enter the manual mode.
How do I manually run a hunter node?
1:042:02Manual Operation with a Hunter Controller - Quick Tip - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just hold down the right arrow up here in this new style face pack. And you let go of the arrow.MoreYou just hold down the right arrow up here in this new style face pack. And you let go of the arrow.
How do you test a hunter sprinkler system?
To initiate the test program:Press and hold the PRG button. The station number will be flashing.Press the or button to scroll to the station you would like the test program to start with. Use the and buttons to set a run time of up to 15 minutes. ... After a 2 second pause, the test program will begin.
How long does a hunter node last?
3 YEARSFrom a battery life standpoint, the answer is not as easy as saying "the batteries will last for two years"....Battery Life.YEARSMAX ON/OFF ACTUATIONS3 YEARS5,5002 more rows
How do I turn my hunter node back on?
To put the Node battery powered sprinkler timer in the off mode, use the center button to advance to the off screen and allow the controller to go to sleep in that position. To turn the controller back on, use the center button to return to the home screen and allow the controller to go to sleep in that position.
Why is my Hunter irrigation system not working?
The most common reason your sprinklers are not watering is because the rain sensor is active. Do you have a rain sensor on your sprinkler system? If so, slide your sensor bypass switch into the "BYPASS" position (on an SRC, turn the dial into the RUN (Bypass Sensor position).
How do I manually test my sprinkler system?
0:231:11How to manually turn on sprinkler system - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can turn and to overwrite or what you do is you turn in till you get a little leaking coming outMoreYou can turn and to overwrite or what you do is you turn in till you get a little leaking coming out and once that happens you'll see the sprinkler. So come on for that zone.
How do you test a sprinkler wire with a multimeter?
2:055:08Testing Sprinkler System Wiring - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf I touch the probe to the station wires 2 through 5 notice that I get a reading between 20 and 60.MoreIf I touch the probe to the station wires 2 through 5 notice that I get a reading between 20 and 60. This is normal for sprinkler wiring with no problems.
How do I know if my Hunter rain sensor is working?
0:000:52How to test if your Hunter rain sensor is working - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe button at the top of the rain sensor hold that down for a couple of seconds and it should shutMoreThe button at the top of the rain sensor hold that down for a couple of seconds and it should shut your system. On. Let go of the button at the top and the zone should kick. Back on.
What does the umbrella mean on Hunter node?
From the Idle Mode, press and hold the left arrow (<) button until the icon is displayed. The display will show the umbrella icon flashing and On. Press the minus (-) button to bypass the sensor. The display will show and Off indicating the weather sensor is bypassed.
How do I program hunter node BT?
5:0911:24NODE: Programming the NODE irrigation controller - YouTubeYouTubeStart of suggested clipEnd of suggested clip1 once station 1 has the run time when we're finished we'll use the center button to scroll throughMore1 once station 1 has the run time when we're finished we'll use the center button to scroll through past the off screen and back to the home screen. The final step is to set the days to water.
How do you program a hunter water system?
Watch our quick video above, or continue reading to learn how to program your Hunter X-Core Sprinkler System.Step 1: Set The Current Time. ... Step 2: Set the Start Times. ... Step 3: Set the Run Time. ... Step 4: Set the Watering Days. ... Step 5: Test Coverage. ... Step 6: Finished!
How do you manually turn on a Hunter sprinkler valve?
0:374:32Basic Hunter Valve Operation - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne would take the solenoid. And turn it a quarter turn counterclockwise. You'll hear the waterMoreOne would take the solenoid. And turn it a quarter turn counterclockwise. You'll hear the water start to flow. Let go of the solenoid.
How do I manually turn on my sprinkler system?
0:165:19How to Turn on Sprinklers Manually + Business Talk - YouTubeYouTubeStart of suggested clipEnd of suggested clipSpicket if you turn that counter clockwise a quarter of a turn. Now we're manually turning on theMoreSpicket if you turn that counter clockwise a quarter of a turn. Now we're manually turning on the sprinklers.
How do I reset my hunter node 200?
0:050:40How To Reset A Hunter Node - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp press a key press any key a quick way to hard reset the controller is to hold down the negative.MoreUp press a key press any key a quick way to hard reset the controller is to hold down the negative. The right arrow and the program keys at the same.
How do I turn on my hunter sprinkler system after winter?
Steps to turn on sprinkler system after winteringFind system's main shut-off valve. ... Find the vacuum breaker. ... Close the vacuum breaker test valves. ... Open the vacuum breaker's shut-off valves. ... Reinstall main valve bleeder cap (as needed). ... Slowly open the main valve. ... Test the system. ... Recheck the vacuum breaker and valves.More items...•
What is the node on a Hunter controller?
Node Buttons and Navigation. On standard Hunter controllers a dial is used to scroll between the programming functions , however, on the NODE the button is used to quickly and easily create the irrigation program. When programming, the flashing portion of the display can be changed by pressing the or buttons.
How to turn on node display?
To turn the Node display on, hold any button down. Use the arrow buttons to navigate through the settings, the plus and minus buttons to adjust a given option, and the center button to change the page or advance to the next feature.
How to wake up a node?
During a short period of inactivity the display will shut off to retain battery power. Pressing any button will wake up the NODE to the Idle Mode.
How reliable is Hunter Node?
For isolated zones, power-restricted areas, the Hunter Node is the smart, reliable solution . The Node mounts to a valve solenoid quickly and easily, and without screws, drills or additional wires. The unit's solid construction and waterproof exterior ensure it can handle the harsh environment of a valve box. Once placed in a valve box, the Node is operated by one or two 9V batteries, which provide standard or extended power throughout the season. Along with exceptional reliability, the Node features an easy-to-program LCD screen, the ability to control a Master Valve, and uses standard Hunter controller programming with 3 programs and 4 start times per program. The array of programming options and rugged reliability make the Node a compact, but powerful irrigation controller with the flexibility of battery power.
What is Hunter Node 2?
The Hunter NODE 2 station battery-operated controller is designed to provide a user-friendly experience. The controller faceplate consists of a small but bright LCD display for easy recognition of programs, start times, and zone indication. The six-button interface includes a program selection, advancement, and decrease of the selected flashing display, as well as a selection programming function. To learn more about these controls see the Hunter NODE controller manual available on the Sprinkler Warehouse NODE-200 product page.
What is a NODE 2 controller?
The NODE 2 station battery-operated controller includes the controller body as well as a plastic mounting device. The mounting part is designed to fit easily onto any Hunter DC latching solenoid. This valve sits comfortably on top of the Hunter valve and is compact enough to fit into a standard round valve box. The waterproof construction of this product will allow the customer to rest easy when mounting this controller directly onto the valve body.
What is a Node 200?
The NODE-200 is a 2 station battery-operated controller that is designed with a compact and durable enclosure. Since this controller is designed to be mounted directly to the valve and installed in the valve box, it is waterproof up to 12 feet. The 2 station operation works well for drip irrigation and controlling specific valves without any overcomplicated programming or wiring. Make lawn irrigation simple again with the NODE-200 battery-operated controller.
How many programs are there on Hunter controller?
Standard Hunter controller programming. As easy to program as any other Hunter controller. 3 programs (A, B, C) and up to 4 start times each
How deep is the NODE?
The NODE is fully submersible and resists all moisture intrusion in water, mud, and debris as deep as 12 feet.
Is Hunter Clik sensor compatible with Wirleess sensor?
Compatilbe with Hunter Clik Sensors and other micro-switch type weather sensors (wirleess sensors not compatible)
