Sprinkler System Inspection: 6 Steps
- Check the water meter to make sure your water is on.. This one may seem obvious, but some homes have a dedicated...
- Turn on the backflow device and isolation valve.. The backflow device should also be turned on. Not all systems have...
- Check the leak indicator on your water meter.. The leak indicator on your water meter will...
How to inspect&test the fire sprinkler system?
Inspecting & Testing the Fire Sprinkler System 1 Step 1: Testing the Control Valve#N#The first step when inspecting the sprinkler system is to test the butterfly control... 2 Step 2: Gauge Readings & Activating the Sprinkler System More ...
How do I know if my sprinkler system is working?
Check the water meter to make sure your water is on. This one may seem obvious, but some homes have a dedicated system for their sprinklers. If your sprinkler system runs on a separate water line, double check your meter to make sure it’s on. 2. Turn on the backflow device and isolation valve.
How does a fire sprinkler pressure gauge work?
The gauge ensures there is proper water pressure for the fire sprinkler system to operate effectively. Once the reading is taken, the technician then opens the main drain of the fire sprinkler system.
What should I do if my sprinkler system runs on a line?
If your sprinkler system runs on a separate water line, double check your meter to make sure it’s on. 2. Turn on the backflow device and isolation valve. The backflow device should also be turned on.
How do you pressure test a sprinkler system?
0:101:18How to Perform a Pressure Test - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet's go ahead and install the gauge. Now. The pressure gauge has ho's threads and will connect toMoreLet's go ahead and install the gauge. Now. The pressure gauge has ho's threads and will connect to any standard hose faucet. We'll go ahead and turn on the faucet slowly to get a pressure. Reading.
How do I test my underground sprinkler system?
0:124:15How To Test Lawn Irrigation Systems - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet the system run for about 15 minutes see how much water's in each can. They'll give us an ideaMoreLet the system run for about 15 minutes see how much water's in each can. They'll give us an idea later.
How do you know if sprinklers are working?
0:253:40How To Inspect A Sprinkler System - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen you want to make sure that you turn it on as slow as possible to limit any damage that mightMoreThen you want to make sure that you turn it on as slow as possible to limit any damage that might occur to the the systems main line. Once. Everything is charged up.
How do I test my new sprinkler system?
Sprinkler System Inspection: 6 StepsCheck the water meter to make sure your water is on. ... Turn on the backflow device and isolation valve. ... Check the leak indicator on your water meter. ... Test the different areas of your system. ... Do a walkthrough of your yard. ... Check the drip system.
How do I test my lawn sprinkler for leaks?
0:323:21Finding leaks in your in-ground sprinkler system - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by turning on the sprinkler system valve again and wait at least two minutes. This allows theMoreStart by turning on the sprinkler system valve again and wait at least two minutes. This allows the main sprinkler system pipe to refill with water go to your controller.
How do you test a bad sprinkler solenoid?
1:454:44Sprinkler System Solenoid Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold one on your red. Lead. And one on your black lead it doesn't matter which wire goes to red orMoreHold one on your red. Lead. And one on your black lead it doesn't matter which wire goes to red or black. And you see that.
How do you test a sprinkler controller?
0:034:16Troubleshooting Your Irrigation Control system with a Volt Ohm MeterYouTubeStart of suggested clipEnd of suggested clipPut one probe to each of the terminals marked 24 V AC. The voltage should be between 24 and 28 voltsMorePut one probe to each of the terminals marked 24 V AC. The voltage should be between 24 and 28 volts. This confirms that the controller is getting power and that the transformer is working if.
How do you troubleshoot a sprinkler head?
Clogged sprinkler heads: You may have a clogged sprinkler head if the head doesn't rise and there is no water. Dirt, sand and other debris build up in the sprinkler head filters. To clean a filter: Turn off your water, lift the pop up riser, remove the nozzle and the filter, clean the filter and return to the nozzle.
What would cause a sprinkler to not work?
The most common issues typically will be located at the valve, such as a shorted solenoid, bad wiring connections, or the valve itself. You cannot rule out a faulty controller as well due to a shorted-out motherboard, or bad module. Lastly, clogged sprinkler heads are an extremely common issue.
How often should a sprinkler system be serviced?
How often should sprinkler systems be inspected? Due to the importance of service and maintenance, an annual service is a requirement, and has been documented in the BS EN 12845 where it states that: "The sprinkler system should be periodically inspected at least once a year by a third party."
How do you test a Rainbird sprinkler system?
0:241:11Rain Bird® ESP-Me: Test All Stations / Probar todas las estacionesYouTubeStart of suggested clipEnd of suggested clipTo begin the test cycle. Press. And hold the manual start. Key. Return the dial to the autorun dialMoreTo begin the test cycle. Press. And hold the manual start. Key. Return the dial to the autorun dial position it.
How do I know if my sprinkler head is bad?
One of the most common problems with a lawn irrigation system is when sprinkler heads get damaged, which is usually easy to spot....Look for:Damage to the plastic casing on the sprinkler heads.Sprinkler heads that don't pop up.Water that sprays wildly or not at all.Sprinklers with heads that are completely broken off.
How do you maintain underground sprinklers?
How To Maintain Your Irrigation SystemCheck Your Water Pressure. ... Check For Any Missing Or Broken Sprinkler Heads. ... Adjust Sprinkler Heads So That They Are At The Right Angles. ... Change Control Timers To Meet Seasonal Plant Needs. ... Match Runtime To Exposure.
How do you fix an old sprinkler system?
0:522:223 Most Common Lawn Sprinkler System Repairs - YouTubeYouTubeStart of suggested clipEnd of suggested clipCreating a big wet spot right next to the sprinkler head another easy repair we just replace theMoreCreating a big wet spot right next to the sprinkler head another easy repair we just replace the sprinkler head or really no parts that can be replaced.
How do I know if my sprinkler head is bad?
One of the most common problems with a lawn irrigation system is when sprinkler heads get damaged, which is usually easy to spot....Look for:Damage to the plastic casing on the sprinkler heads.Sprinkler heads that don't pop up.Water that sprays wildly or not at all.Sprinklers with heads that are completely broken off.
What is a fire sprinkler test?
A test is a more involved physical check to make sure the fire sprinkler system not only looks like it’s functioning, but actually works as it should. Routine sprinkler maintenance and repair are critical to keep your fire sprinklers in good working condition.
Why do you need to use a fire sprinkler inspection company?
It is recommended to use fire sprinkler inspection companies that can service all your locations so records are easily accessible from one entity. Keeping these inspections up-to-date helps you avoid fire safety fails & code violations. In 97% of fires with operating sprinklers, five or fewer heads operated.
What to do if you find an issue with a fire sprinkler?
If you find an issue during fire sprinkler inspections or suspect that something may be wrong at any time, contact a reliable, experienced fire protection company , like AIE, as soon as possible for fire sprinkler testing.
Do you need to stay up to date on fire sprinklers?
You must stay up to date on fire sprinkler testing and fire sprinkler maintenance. Experts ensure they’re in working order with regular fire sprinkler inspections, as well as follow maintenance and testing timelines. When you follow the required fire sprinkler system inspections and testing, as well as sprinkler system maintenance schedules set by ...
What to look for when inspecting sprinkler heads?
When inspecting valves, pipes, connection points, and sprinkler heads, look for things that affect the uniformity of the spray pattern or anything that is wasting water. Your system should distribute water evenly across your lawn – not over hard surfaces like driveways, sidewalks, ...
What is the test mode on a sprinkler system?
Most irrigation systems have a “test” mode that allows you to run the sprinkler for a short period of time. After running the sprinkler on “test” mode, you may have a better idea of where an issue is occuring.
How long do lawn sprinklers last?
Each spring, it’s essential to catch leaks from your lawn irrigation system early in the season. Sprinkler systems have a life expectancy of up to 20 years when properly taken care of.
How to tell if sprinkler system is leaking?
Start by disabling the system and turn off all water sources that feed it. If your irrigation system shares water with the rest of your house, make sure all water sources inside your home are shut off as well.
What happens if your water meter doesn't match?
If the numbers don’t match, there may be a leak. For some homeowners, the water meter will have a small indicator on the face designed specifically to detect leaks. If all your water is completely off and you’re still seeing movement with this indicator, you may have a leak somewhere along the line. 3.
Can a tilted sprinkler head cause water waste?
Tilted sprinkler heads can lead to significant water waste, so you’ll want to be sure they’re corrected. You’ll also want to keep an eye out for blatant leaks, obstructions, and standing water. Standing water is often an indicator of more serious problems.
Does a home warranty cover sprinklers?
Not everyone knows home warranties can cover sprinkler systems as well as your pool, spa, garage door, roof, and other unique areas of your home. With a home warranty, you’re able to submit a claim to cover the repairs or replacements of any mechanical damage according to your terms of service.
Why do you put a tamper seal on a Koorsen valve?
Once the valve is returned to its normal position Koorsen will then place a tamper seal on the valve to ensure it is in the correct position before leaving. The tie can easily be broke in the event that the valve needs to be closed. The seal also serves as a deterrent to keep people from tampering with the valve.
What is a backflow preventer?
A backflow preventer, or a double check valve backflow prevention assembly in this case, is a device that is connected between the water line leading to the sprinkler system and the public water line coming from the street. A backflow preventer device is installed to prevent the reverse flow of water, which could contaminate the public water supply. Due to the size of the campus and the number of buildings, there were four backflow devices to inspect and test.
What is a Koorsen technician?
In this case, the Koorsen technicians were inspecting and testing the entire campus, which consisted of over a dozen buildings. Some were original buildings when it was an arsenal while others were built around 1912 when it was transformed into a high school.
Why is backflow preventer installed?
A backflow preventer device is installed to prevent the reverse flow of water, which could contaminate the public water supply. Due to the size of the campus and the number of buildings, there were four backflow devices to inspect and test.
Where are Koorsen technicians trained?
Koorsen technicians are fully certified and receive ongoing training at the Koorsen Training Center, one of the largest and most advanced training center of its kind.
Where is the second sprinkler technician?
In the attic, the second technician goes to the corner of the floor where the sprinkler risers or the main sprinkler pipes that go up through the building are found .
Why are there butterfly valves on each floor?
The reason there are butterfly control valves located on each floor is to allow the ability to turn off an activated sprinkler on that floor without turning off the sprinkler system for the whole building . For instance, if there was a fire in one of the attic areas and the sprinkler above the fire activated and put out that fire, ...
