Kenmore Model 158 Sewing Machine Instructions
- Step 1 Rotate the hand wheel on the right side of the sewing machine until the needle is at its highest point. ...
- Step 2 Place a spool of thread on the thread spindle on top of the sewing machine. ...
- Step 3 Place the bobbin back into the bobbin shuttle. ...
- Step 4 ...
- Step 5 ...
- Step 6 ...
How do you attach a bobbin to a sewing machine?
Insert the bobbin. Position the bobbin so that the thread winds around it in a clockwise rotation. Push the bobbin into the case, and weave the end of the thread into the slot located at the top of the case. Continue pushing it through this slot until you can pull the thread under the tension spring.
How do you tighten the thread on a Kenmore sewing machine?
Draw the thread down and slide it between the tension discs on the tension dial. Pull the thread up and slip it through the eye of the take up lever. Pull the thread down and slip it through the thread guides at the bottom of the left hand side of the machine and on the needle assembly.
Which way does the spool go on a Kenmore sewing machine?
The thread of the spool should be wrapped around the center in a counter-clockwise rotation. For most models, the spool pin is vertical. On some models, though, like the Kenmore 385.16120, the spool pin will actually sit in a horizontal position as you wind the bobbin and thread your machine.
How do you remove a broken thread from a sewing machine?
Raise the presser foot and hold a length of thread from the needle loosely. Crank the hand wheel slowly to dip the needle into the throat plate. Tug on the end of the thread that you're holding from the needle and pick up the thread from the bobbin. Pull both threads to the back of the presser foot.
How do you thread a bobbin on a Kenmore sewing machine?
1:143:11Part 2-Threading the Bobbin Tutorial on Kenmore 385 Series Sewing ...YouTubeStart of suggested clipEnd of suggested clipYou're going to have to push it. Out. Okay so that's in make sure you push it out that actuallyMoreYou're going to have to push it. Out. Okay so that's in make sure you push it out that actually stops the needle from from moving on to press your foot pedal.
How do you thread the bobbin on an older Kenmore?
1:0311:25How to Thread A Sewing Machine Kenmore Sears 148.14220 Wind ...YouTubeStart of suggested clipEnd of suggested clipSo make sure you just stick the thread through one of those little loops right there grab on to itMoreSo make sure you just stick the thread through one of those little loops right there grab on to it an inch or two and take the bobbin. Place. It right here onto the bobbin winding pin.
How do you use a Kenmore 158 sewing machine?
1:278:41SEARS KENMORE 158 SERIES SEWING MACHINE DEMO ...YouTubeStart of suggested clipEnd of suggested clipHere oh this is and i did make a video of how to thread the kenmore's. This was the machine i usedMoreHere oh this is and i did make a video of how to thread the kenmore's. This was the machine i used in that video.
How old is a Kenmore 158 sewing machine?
The Kenmore 158 series was an affordable, heavy-duty sewing machine produced in the 1970s. The Kenmore 158 series was manufactured by the Sears Corporations in the late 1960s and early 1970s.
How do you thread an old Sears Kenmore sewing machine?
1:523:22How to thread Sears Kenmore Sewing Machine 158.12270, 158 - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou feed it through the hole you pull it out through the hole. You bring it back down through thisMoreYou feed it through the hole you pull it out through the hole. You bring it back down through this silver guy. And then down here it's a guy you feed the thread through. This guy.
How do you thread the bottom bobbin?
5:579:27How to wind a bobbin and thread the bottom of your sewing machineYouTubeStart of suggested clipEnd of suggested clipThe top to the left. So anti-clockwise you then drop it into the Machine. And at. If you imagineMoreThe top to the left. So anti-clockwise you then drop it into the Machine. And at. If you imagine this is looking like a clock between 6 and 7 o'clock you'll have just a really tiny little catch.
How do you thread a Kenmore sewing machine?
0:022:44How to Thread Kenmore Sewing Machine Model # 158 1212180YouTubeStart of suggested clipEnd of suggested clipAnd then it comes back up and into that little hook and then the take-up lever and that has to beMoreAnd then it comes back up and into that little hook and then the take-up lever and that has to be all the way at the top there's a little hole. You put the thread. Through the hole.
How do you use a vintage Kenmore sewing machine?
0:4310:16Demonstration Video of a Vintage Kenmore 158.14100 Sewing MachineYouTubeStart of suggested clipEnd of suggested clipOr push it down for a for a more squish on your fabric we'll put it about in the middle your doorMoreOr push it down for a for a more squish on your fabric we'll put it about in the middle your door opens up there's your light bulb. Here is a kenmore feature.
Are old Kenmore sewing machines good?
Kenmore 30 Stitch: Best Vintage Zigzag Sewing Machine Produced in the 1980s, these are affordable, high quality machines. You can find them in good condition for around $100 to $200.
Do they make Kenmore sewing machines anymore?
Kenmore machines were last being made by Janome and only sold at Sears. I'm not totally surprised they stopped selling them. I don't know what Sears is doing but they have a hard time competing price-wise on some products and sewing machines certainly fell in that category.
How do you tell what year a Kenmore sewing machine was made?
The model number is the best way to determine when your Kenmore sewing machine was manufactured. For example, if your version is 117.101, it was manufactured in 1934. If it says 117.123, it was manufactured in 1939.
How do you put a bobbin in a Kenmore Sears sewing machine?
2:393:33Part 4- Insert the Bobbin into Sewing Machine on Kenmore 385 Series ...YouTubeStart of suggested clipEnd of suggested clipMy bobbin thread is here and we pulled the bobbin through the middle or through the machine I wantMoreMy bobbin thread is here and we pulled the bobbin through the middle or through the machine I want to put both of these through the feet.
How do you fill the bobbin on a Kenmore?
0:403:24How to wind a bobbin on a kenmore sewing machine the CORRECT WAYYouTubeStart of suggested clipEnd of suggested clipAnd here to go ahead and show you that that works fine now to wind a bobbin you have to release thisMoreAnd here to go ahead and show you that that works fine now to wind a bobbin you have to release this clutch. So you turn it towards you and it loosens and now check as you press it.
How do you thread a bobbin on a Kenmore 12 sewing machine?
1:493:43How To Load a Bobbin KENMORE Sewing Machine Model ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipDraw the thread from the spool through the bobbin winding tension this year pause bobbin a windingMoreDraw the thread from the spool through the bobbin winding tension this year pause bobbin a winding spindle to the right until you hear a click sound.
How do you thread the bobbin on a Kenmore 14?
3:517:56Thread a Kenmore Sewing Machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour bobbin needs to be spinning clockwise when you pull on the thread. So if you drop your bobbinMoreYour bobbin needs to be spinning clockwise when you pull on the thread. So if you drop your bobbin either into a top loader sewing machine or in the bobbin case of a side loader.
Who made the Kenmore 158 sewing machine?
Thread. Scissors. Many vintage sewing machines still sew today. Manufactured by Singer, the Kenmore 158 was sold in the late 1970s and is one of the last mechanical sewing machines offered by Sears. The sewing machine offers a variety of stitches determined by the choice of plastic cams that were placed in a compartment at the top ...
How to use a sewing machine with a bobbin?
Place a spool of thread on the thread spindle on top of the sewing machine. Pull 2 feet of thread from the spool. Draw the thread downward and slip it between the bobbin tension discs on the right side of the machine. Wind the thread five or six times around the bobbin. Place the bobbin on the bobbin winding spindle next to the hand wheel. Snap the bobbin winder lever down. Loosen the hand wheel by rotating the center portion of the wheel toward you. Press the foot pedal and wind the bobbin. When the bobbin is full, release the pedal, tight en the center potion of the hand wheel, open the bobbin lever and clip the thread.
How to tighten a sewing machine needle?
Loosen the flanged screw on the back of the needle assembly. Insert the back of the sewing machine needle into the hole at the bottom of the assembly with the flat portion of the needle toward the back of the machine. Tighten the flanged screw. Thread the needle from front to back.
How to thread a sewing machine?
Pull 2 feet of thread from the spool on top of the sewing machine. Slip the thread under the thread guide at the top of the machine. Draw the thread down and slide it between the tension discs on the tension dial. Pull the thread up and slip it through the eye of the take up lever. Pull the thread down and slip it through the thread guides at the bottom of the left hand side of the machine and on the needle assembly.
How to put bobbin thread in a bobbin case?
Place the bobbin back into the bobbin shuttle. Slide the bobbin thread into the slot on the side of the bobbin shuttle and slip the thread under the tension spring. Leave a 1-foot tail. Hold the handle of the bobbin shuttle open and place the bobbin back into its place below the needle. Pull a tail of thread out of the door to the bobbin case. Slide the door closed, leaving it open 1/4-inch.
How to remove bobbin from needle?
The door to the bobbin case lies directly beneath the needle. Slide the door to the left. Pull out the small rectangular latch on the bobbin shuttle and the entire circular piece will come free. Remove the bobbin from the bobbin shuttle.
How to wind a bobbin?
Wind the thread five or six times around the bobbin. Place the bobbin on the bobbin winding spindle next to the hand wheel. Snap the bobbin winder lever down. Loosen the hand wheel by rotating the center portion of the wheel toward you. Press the foot pedal and wind the bobbin.
How to thread a Kenmore sewing machine?
If you need to thread a Kenmore sewing machine, turn the clutch knob counter-clockwise to release it, then place your spool of thread on the spool pin. Pull thread from the spool and fit it into the small tension disc, then pull the thread through the hole of the bobbin.
How to put a bobbin on a bobbin winder?
Before placing the bobbin on your bobbin winder shaft, insert the thread through the hole in your empty bobbin spool. When done, place the bobbin on the machine's bobbin winder shaft. Make sure that the bobbin spool is flipped so that the hole appears on the top, rather than the bottom.
What direction should the spool pin be wrapped?
The thread of the spool should be wrapped around the center in a counter-clockwise rotation. For most models, the spool pin is vertical. On some models, though, like the Kenmore 385.16120, the spool pin will actually sit in a horizontal position as you wind the bobbin and thread your machine.
Where is the spool pin on a Kenmore 117.591?
On the Kenmore 117.591, the spool pin is located at the base of the machine and the bobbin winder, along with its corresponding parts, are located on the front right of the machine. ...
How to get a click on a bobbin?
Push the bobbin to the right. Firmly push the bobbin and its shaft to the right of the machine until you hear a click.
Where are the thread guides on a Kenmore 117.591?
Note that on the Kenmore 117.591, the thread guides and all corresponding parts are located on the left side of the machine and not on the front. The threading process essentially remains the same, though. This is also true of several other models, including the Kenmore 28, 29, 40, 1100, 1101, and 1102.
Where is the bobbin winder shaft?
The bobbin winder shaft usually lies to the right of your spool pin.
