- Roll the cover along the edge of the pool from one side to the other. Start in a corner of the pool.
- Unfold the cover across the width of the pool. After you’ve stretched the cover along the pool edge, start unfolding it horizontally.
- Trim the edges of the cover if you want a perfect fit. ...
- Install a roller to make covering the pool easier. Plastic and solar covers can be stored inside a roller on the edge of the pool.
- Replace the cover as soon as you’re done swimming. Plastic covers prevent evaporation and keep debris out of the pool, and solar covers help keep the pool warm by ...
How to install a swimming pool cover?
Once the cover is installed, use it whenever children are in the area to prevent accidents. Roll the cover along the edge of the pool from one side to the other. Start in a corner of the pool. Line the end of the cover up with the edge of the pool. Then, roll the cover out along the edge until you reach the other side. [1]
How do you cut a pool cover?
If the cover stretches far over the edge of the pool and you want to make it fit better, then you can trim the cover. Take a pair of sharp scissors and cut along the edge of the pool in a straight line. [4] For a perfect fit, you can make a waterline cut right along where the water meets the pool. Then your cover will be perfectly-sized.
What is the best way to cover a pool in winter?
If you have an in ground pool, water tubes or bags are the best option. These long, narrow tubes go around the edge of your pool cover to weigh it down and keep it in place throughout the winter months.
How do you secure a pool pillow to the pool?
Larger pools may require multiple pillows for adequate protection. Your air pillow will have grommets that allow string ties. Tie a strong, thin rope to your pool pillow using these grommets. Velcro is another way to secure the cushion in the center of the pool.
What do you tie down pool covers with?
Water bags are the easiest and most effective way to hold down your winter pool cover. Built from heavy-duty vinyl designed to withstand sub-zero temperatures, water bags provide peace of mind. Once installed, you know your pool cover will be secure all winter long.
How do you clamp down a pool cover?
0:122:09Installing Winter Pool Cover Clips - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen lay your cover out over the pool loosely. And use some cover clips and I'll go into those in aMoreThen lay your cover out over the pool loosely. And use some cover clips and I'll go into those in a second to attach it. So that you have the overhangs sort of uniform all the way around the pool.
How do I keep my pool cover secure?
0:582:32How to PROTECT Your Above Ground Winter POOL COVER - YouTubeYouTubeStart of suggested clipEnd of suggested clipCover is secure with a cable and a winch. Not a winch you don't want to wench securing your aboveMoreCover is secure with a cable and a winch. Not a winch you don't want to wench securing your above ground pool cover that would be weird. Keep it wrapped under the rails.
How do I stop my pool cover from blowing in the wind?
10 Ways To Keep Your Pool Cover From Blowing OffCable and Winch. If you have an above ground pool, a cable and winch system is a great way to hold down a pool cover during windy days. ... Cover Clips. ... Cover Seal. ... Concrete Anchors. ... Water Tubes. ... Pool Sandbags. ... Cover Tracks. ... Automatic Slatted Pool Covers.More items...
How do I keep my pool cover from sagging?
Use Heavy Objects To Keep The Edges In Place Adding weight to the outer edges of your pool cover will prevent it from getting loose and sagging. To do this, you can use heavy objects such as proper heavy gauge water bags to line the width and length of your pool.
How do you tie an above ground pool cover?
2:129:08How to Close Your Pool- Part 3- Attaching Your Winter CoverYouTubeStart of suggested clipEnd of suggested clipThen your cover is going to wrap over that then the second clip is going to kind of sandwich theMoreThen your cover is going to wrap over that then the second clip is going to kind of sandwich the cover to the first clip that creates a bond that's really really tight and hard to separate.
Should a pool cover touch the water?
The cover is designed to touch the surface of the water. So your pool should always be filled when covered, and the water level should never go below 18 inches from the top of the pool. Check the water level of the pool and fill it up if it goes below 18 inches.
How do I lock my above ground pool cover?
2:396:58HOW TO INSTALL COVER LOCKS - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can put that come around here. And then put your lock on. So you're just put this thing up. AndMoreYou can put that come around here. And then put your lock on. So you're just put this thing up. And as it goes on there you can see it locks it right in and it's held right on there nice and tight.
How do you use cover clips?
Cover Clips keep your above ground pool cover in place. These handy fasteners are tough! They grip your top rail like a clothespin and hold your cover tightly in place. Use two clips per upright....Go to your orders and start the return.Select the return method.Ship it!
How do you secure a pool pillow?
Tie a strong, thin rope to your pool pillow using these grommets. Velcro is another way to secure the cushion in the center of the pool. Attach one piece of velcro to the device and the other directly to the pool cover center. This method keeps the parts together without risking string breaking.
How tight should an above ground pool cover be?
1:325:44How Tight Should A Winter Pool Cover Be? - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown until it sits tight on the water level the whole way. And then tight straight up the wall.MoreDown until it sits tight on the water level the whole way. And then tight straight up the wall.
What are the different types of pool covers?
3 Types of Pool Covers#N## 1 Mesh Safety Pool Covers#N#Light weight, easy to store. Easy to install and remove. Snow and ice will melt into the pool. Debris and leaves will not get in the pool. 2 Heavy Duty Mesh Covers#N#Exactly the same as mesh covers, however only 1% of sunlight can get in. Thicker, more durable, more expensive. 3 Solid Safety Pool Covers#N#Prevents 100% of light from reaching the pool, less evaporation. Most expensive and most durable option.
Do you need a deck around a pool?
Utilize this installation method if you do not have a pool deck and want to anchor your safety cover directly into the ground. This is the anchor-in-pipe method which is done around the entire perimeter of the pool. Sinking the pipes very low so the lawn mower wouldn’t destroy them.
How to unfold a pool cover?
Unfold the cover across the width of the pool. After you’ve stretched the cover along the pool edge, start unfolding it horizontally. Unfold one section at a time. Work until the cover reaches across the width of the pool.
How to make a solar pool cover?
Start in a corner of the pool. Line the end of the cover up with the edge of the pool. Then, roll the cover out along the edge until you reach the other side. Some plastic covers, especially solar covers, have bubbles that make them look like bubble wrap.
How to make a pool cover with bubbles?
If your cover has bubbles, lay it down so the bubbles face the water. If you have a round pool and cover, then pick a side to start on. Unroll the cover gradually until it stretches across the pool. These instructions will work for any plastic cover, even if it isn’t a solar cover.
How does a motorized pool cover work?
Since removing and replacing a safety cover is a lot of work, getting a motorized cover makes the job much easier. A roll is installed at one end of the pool, and the cover rolls out along tracks on the side of the pool. This setup makes closing and opening your pool a matter of just pressing a button.
How to keep a pool warm when not using it?
Replace the cover as soon as you’re done swimming. Plastic covers prevent evaporation and keep debris out of the pool, and solar covers help keep the pool warm by absorbing sunlight. For the best results, keep the pool covered at all times when you’re not using it. Replace the cover once you’re done with it so it’s clean and warm the next time you want to swim. [6]
What is the best way to stop a child from getting into a pool without supervision?
While safety covers help prevent accidents, fences are the best way to stop a child from getting into the pool without supervision.
What do safety covers have?
Some safety covers have ropes or hooks that clip to the rods. Always follow the instructions provided for the correct process.
What is the best pool cover?
A safety cover is one of the best pool products you can buy. Safety covers look great, protect the pool while keeping kids safe, and with a 12 year lifespan, they far outlast non-safety pool covers. In addition, they are easier to care for; very low maintenance. Except for Installation.
What is a paver pool deck?
A paver pool deck is made up of interlocking bricks, pavers, stone or ceramic tiles. They are placed over a concrete sub-deck or on a bed of crushed stone or sand. Pavers can be mortared in place, but often are placed tightly together with a steel band on the outer edge.
Why use a wood deck anchor?
Because wood can rot, or soften with age, a Wood Deck Anchor is used, which has a wide flange on the top of the anchor, to protect the deck and hold the cover securely with more lateral strength.
Can you remove a Meyco stake during pool season?
Stakes can be easily removed during pool season, if desired. Meyco has introduced an improved stake (shown) they call the Garden Stake, with side wings in an X fashion, to hold more securely, even in wet or loose soils. Installing new or replacement safety cover anchors is a snap – and totally DIY friendly.
Can you use concrete anchors in a wooden pool deck?
Can you use concrete anchors in a wooden pool deck? You could (and I have); it is faster and easier, but your safety cover may not be so safe, and doing so voids the manufacturer’s warranty.
Can you put a safety cover on an inground pool?
I once installed a safety cover on an inground pool that had no deck. Grass surrounded the pool, so we used the anchor-in-pipe method around the entire pool, sinking the pipes very low so the lawn mower wouldn’t hit them.
Can you rent drills for safety cover anchors?
You can rent drill (s) from any rental shop, and for safety cover hardware – we’ve gotcha covered!
What to use to keep pool cover in place?
If you have an in ground pool, water tubes or bags are the best option. These long, narrow tubes go around the edge of your pool cover to weigh it down and keep it in place throughout the winter months. There are many sizes and styles to choose from when you need to buy these tubes, so you might have to shop around a little to get a better idea ...
Why are above ground pools easier to close?
Above ground pools are a lot easier to close, typically, because they are less involved than in ground pools. You will get cheaper supplies and have a faster closing, and you won’t spend as much on weights or tie downs because there will be less to secure. It all depends on the type of pool that you have, however, so make sure that you do a little research so that you know what to expect.
Do you need weights for a pool cover?
There are some cases where these are not the best options for securing your pool cover. For example, if you use a skimmer type cover, you won’t need weights because of the way that the cover secures taut across the pool with stakes, tie downs, or other securing methods.
Can you close a pool in the winter?
Closing the pool for the winter is a tedious task, but it’s one that is definitely necessary. When you live in a climate where you can’t use the pool during winter months, you need to make sure that you’re keeping it safe and ready to go once the weather warms up again.
Do above ground pools have weights?
Above Ground Pools. Above ground pools don’t typically use weights. Because these pools are higher off the ground, the cover is usually tied down. This can be done by getting a cover that ties to the pool frame itself, or by putting stakes and tie downs in the yard around the pool to hold the cover in place.
Can you winterize a pool?
With so much to choose from, winterizing your pool has never been easier . Just remember to secure your cover correctly depending on the type of pool and cover that you have so that you can keep your pool safe and protect your cover from damage.
Can you use concrete blocks to cover a pool?
You should NEVER use concrete blocks, bricks, or other abrasive materials to secure your pool cover. Not only are these not guaranteed to stay put or not crumble over the course of the winter, but they are also very likely to rip, pull, or damage the cover. This can damage your pool, as well, which can lead to further problems.
How to secure a pillow in a pool?
Secure the pillow in place by tying the attached strings’ ends to opposite edges of the pool. The tension in the lines will keep the cushion in place. But do not link the ropes too tightly. Tight strings may tear the pillow or break, allowing the device to float freely.
How to secure a pool pad?
If you are using multiple pillows, tie them to each other as well. Secure the pillow in place by tying the attached strings’ ends to opposite edges of the pool.
What is a Pool Pillow, and What Does It Do?
A pool pillow is merely a small, inflatable, vinyl pillow placed in the center of your pool between the winter cover and the water. The concept is incredibly simple, but it’s an effective method for winter pool cover maintenance. They can be used on both above ground pools and inground pools.
How to keep pool pillows from deflating?
Place duct tape over the air valve to prevent the pillow from deflating over the winter. Larger pools may require multiple pillows for adequate protection. Your air pillow will have grommets that allow string ties. Tie a strong, thin rope to your pool pillow using these grommets.
How to inflate a pool pillow?
Push the valve in with your finger to expose the opening. Then use a simple air pump to inflate the device. Alternatively, you can also use a hairdryer on the ‘cool’ setting or a shop vac on reverse to blow up the pillow. Only blow enough air into the pool pillow to inflate it up to 60-80% capacity.
What does an air pillow do for a pool?
They may be deceptively simple, but pool pillows can play a significant role in protecting your pool from everything winter can throw at it.
How to use pool air pillow?
Follow these steps to use your pool air pillow correctly. First, locate the small red valve on the top of your pool pillow. Push the valve in with your finger to expose the opening.
What is a pool cover pump?
A pool cover pump is a small, submersible pump with a garden hose connected to discharge the rain and snow-melt. More than an inch of water on your cover puts stress and may damage your cover, or contaminate a clean pool, growing algae and staining surfaces.
What are the different types of pool covers?
But to help you make an informed decision, winter pool covers can be broken down into 3 groups; solid, mesh and one that is a unique combination of the two.
What happens if the cover pump hose runs uphill?
Run discharge hose downhill: If the cover pump hose runs uphill, remaining water will freeze inside the hose and could damage the pump.
How to find the surface area of a pool?
TIP: Since water expands about 9% when it freezes into ice, use enough Air Pillows to cover about 10% of your pool surface area. Compute a round pool surface area, with the formula pi (3.14) x R2, or multiply the Radius (half pool width) by 3.14 to find surface area .
Why do you need an air pillow in a pool?
Without an air pillow, your entire pool surface will freeze solid, placing immense pressure on the walls and uprights. Air Pillows absorb ice expansion, which is why they are sometimes called Ice Equalizers.
How to find air leaks in a pillow?
Use soapy water to find leaks: Speaking of air pillow air leaks, you can find them with soapy water (look for the bubbles).
How to stop pool from clogging?
Frisbee Trick: Place an upside-down Frisbee® on your pool, and set or secure your cover pump for greater stability and reduce clogging.
What is a pool with two roman ends?
For example, a pool with two roman ends is a linear shape. Both roman ends will need to be included when measuring the pool to ensure that the cover’s size is accurate.
Is it safe to close a pool in the winter?
Make sure your swimming pool is ready for the colder months! Closing your pool correctly will ensure your water is safe from algae over the winter.
Can kidney shaped pools be awkward?
Kidney-shaped pools can prove to be a little awkward when it comes to sizing a pool cover; take a look at our kidney pool measuring instructions.
