How to Tension an Electric Fence Safely
- Attach the Wire to the Wheel Strainer. Feed the end of the wire into the wheel of the winch and secure it.
- Take Up the Slack. Start the winch and take up the slack on the wire. Be careful not to get the wire tangled up.
- Stop when the Tension is Correct. When the wire has been pulled level, STOP the winch. Do not tension the wire any further. ...
How to tighten fence with nothing but pliers?
Tightening barbed wire, double, or single-strand wire fences can be done using pliers in the same way as a mesh fence, but a more effective option is to create a hitch or twist-tie by looping the wire around itself and using a lever to twist it tight. In most cases, a long bolt will be perfect as a lever.
How to keep your fence in good shape?
Keep Your Aluminum Fence in Good Shape with the Right Landscaping
- Schedule Regular Tree Services. Falling branches and limbs can mean big trouble for your fencing, leading to the fence being severely damaged underneath.
- Avoid Planting Intrusive Shrubs Nearby. ...
- Use Trellises for Climbing Vines Instead. ...
How to fix tension wire on a fence?
- Attach the wire to this post using the staples as on the primary post.
- Move your hands down to the edge of it and stretch the wire again by pulling away from the center and away from the previous fence post. ...
- Continue this process until that fence post or piece of the frame is complete, stretching the wire netting and attaching it to your posts.
How to refinish your fence?
You will need:
- Exterior wood primer
- Exterior wood paint
- Plastic sheets or bed sheets
- Sanding paper
- Warm water, detergent/bleach
- Sponge and dry brush
- Plant garden ties/ canes (if needed)
- Fence paint brush (2-5”)
- Roller /paint spray gun if using
- White spirit (optional for cleaning)
How tight does electric fence need to be?
Your fence should be like a rubber band. If the posts are too close, the insulators may break, and the posts may come out of the ground if anything runs into them. However, if they are spread apart, the wire will only bend a little, and not break off completely.
How do you fix a sagging electric fence wire?
3:576:31Temporary Fix for sagging electric fence wire at AldermanFarmsYouTubeStart of suggested clipEnd of suggested clipIt's kind of old and of course by twisting this wire out got me.MoreIt's kind of old and of course by twisting this wire out got me.
How do you tension a Polywire fence?
3:505:25Tying Off and Straining an Electric Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we'll run our chain out pull the wire up hand tight attach the under other end of a strainers.MoreSo we'll run our chain out pull the wire up hand tight attach the under other end of a strainers. And now we're right to start walking the feet up the chain. Now that's about as much tension.
Why is my electric fence so weak?
Poor grounding is one of the most common faults in electric fencing systems. If the ground is not completed correctly, the energizer cannot operate at is maximum potential. A rule of thumb is three feet of ground rod for each output joule of energy from the energizer.
What happens if you don't ground an electric fence?
If It Isn't Grounded, It Won't Shock When an animal touches the electrically charged fence wire, the animal feels the electric current as the charge passes through the body. The charge then completes the circuit through the soil via the ground rod and then up the ground wire to the ground terminal charger.
Should an electric fence be a closed loop?
The short answer is: no. For an electric fence to be properly installed it should not be a closed loop. When an animal touches the electric fence, this should be the missing link in the loop for the animal to get the shock. The loop can also be formed by vegetation touching the fence.
How do you use a fence tightener?
2:395:19The SIMPLEST Way To Tighten Fence Wire | Strainrite Ratchet StrainerYouTubeStart of suggested clipEnd of suggested clipSo i ran the wire through the hole and then put a bend in it. So that way the wire can't come backMoreSo i ran the wire through the hole and then put a bend in it. So that way the wire can't come back out of the hole. And right now i'm just trying to get that wire. Started around that spindle.
How do you use a fence tensioner?
0:411:41How to Tension Fence Wire With a Wire Tightener and Tension SpringYouTubeStart of suggested clipEnd of suggested clipNote that the tugs have notches on them when compressed the first notch is equal to about a hundredMoreNote that the tugs have notches on them when compressed the first notch is equal to about a hundred and fifty pounds of tension the second notch is about 250 pounds install a chain grab and cut the
Can electric fence wire be spliced together?
Splices are usually needed as you come to the end of one spool of electric poly wire, but you still need to extend the fence. They allow you to link the polywire from one spool to the next. Secondly, polywire sometimes breaks and the de-energized section of fencing needs to be quickly re-established.
How do you tie electric fence wires together?
How to Tie Electric Fence Wire TogetherGrasp the two ends of wire you want to join, placing one in each hand. ... Create a simple loop in the wire in your right hand by folding its end back and over so the wire overlaps itself once.More items...
How do you fix an electric horse fence?
10:1012:55Farm Stuff #11 - Fixing Electrobraid Electric Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you don't get shocked. Move down the wire probably right over here to make a new connection plugMoreSo you don't get shocked. Move down the wire probably right over here to make a new connection plug it all back in and then we're good to go. So it really is a simple procedure.
How do you fix a broken wire in a fence?
3:216:03Fixing Wire Fencing - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use a pair of fencing pliers. We're just going to bend the wire over the pliers. We're goingMoreYou can use a pair of fencing pliers. We're just going to bend the wire over the pliers. We're going to wrap the tag in around itself back onto itself we want to go three to four drops.
Why do farmers use electric fences?
Many farmers are now using an electric fence to keep their animals from straying. The electric fence raises a few problems when it comes to tensioning the cables. A clever invention is the in-line fence strainer which is used to tension each wire. This also avoids cutting the wire. The device is a wheel which slips onto the loose fence wire which is then winched to take up the slack.
Why shouldn't wire be over tensioned?
The reason that the wire should not be over tensioned is that if there is too much tension on the wire, after time there is the possibility that the fence posts could be pulled completely out of the ground. With changing climatic conditions, the wire in the fence expands and contracts often to the detriment of the support structures.
How to tighten a ratchet?
Put the clamp on the braid and attach the clamp to the s-hook on the ratchet and begin to tighten by hand.
Why tension an Electrobraid fence?
Tensioning your ElectroBraid® fence is important because it ensures safety of your animals, longevity of the fence and a clean, pastoral look.
How to assemble a tension kit?
To assemble your tension kit, tie the s-hook to one end of the ratchet rope, and insert the other end of the ratchet rope into the ratchet opposite the release switch, around the ratchet wheel and then out again in the opposite direction.
Why is tension important in fencing?
Proper tension is almost as important as your energizer; it provides the rigidity needed to bounce animals back away from the fence if they come into contact with it – just like the ropes in a boxing ring.
How long does it take for an electrobraid fence to settle?
That’s it! Now, remember to allow ElectroBraid® to sit for 24 hours after initial tensioning, giving posts time to settle. Re-tensioning after 24 hours completes the tensioning process. ElectroBraid® maintains its tension very well, so you will not have to constantly re-tension unless posts are moved by frost or if animals or machinery collide with it. Do you have any additional advice to give about tensioning a fence? Let us know on your next visit to Facebook.
How to use Electrobraid tension kit?
By following these easy steps, your fence will be tensioned in no time. To assemble your tension kit, tie the s-hook to one end of the ratchet rope, and insert the other end of the ratchet rope into the ratchet opposite the release switch, around the ratchet wheel and then out again in the opposite direction. Then, tie a knot in the ratchet rope to prevent it from slipping back out of the ratchet.
How far above ground do you need to ground electric fencing?
To install electric fencing, you need at least 1 grounding post that is 6 feet (1.8 m) (182.88 cm) or longer. Place 1 grounding rod near the charger and use a post-hole digger/slammer to set the grounding post. Leave at least 2 inches (5.08 cm) of the post above the ground.
How to keep weeds away from fence?
Grasses, bushes, and weeds growing up along your fence can lead to a loss of voltage. Remove any plants that have grown up along your fence, and spray a glyphosate herbicide (like RoundUp) to reduce plant growth in the area.
Why do you need insulators for fence posts?
Mount the insulators. Because you need to keep the electricity in the wires and away from the posts, insulators are important to install. It'll depend on the type of fence wire you purchase, because manufacturers will usually include and design insulators tailored to their products.
How to check if a fence is working?
Turn the charger on. Use a voltmeter to test the lines to ensure the electricity flows through the entire fence. Write down the voltage and keep the number on hand to compare to daily checks of the current. Depending on the strength of your charger, it should read somewhere between 6000 and 10,000 volts, unconnected.
What is the best charger for a 5 acre fence?
If you've got a five acre fence, you'll need at least a joule at the minimum.
What is the purpose of insulators in rope fencing?
Most common are are insulators that allow braided or rope style fencing enough space to slide through, helping to avoid rubbing.
Why hang warning signs on electric fence?
Hang electric fence warning signs so that people know the fence is hot.
