This is how it works
- Undo the wing nut and open the sprocket cover manually.
- Turn the little adjusting knob above it anti-clockwise to slacken the chain, or turn the knob clockwise to tension the chain.
- The guide bar is automatically secured in place when the sprocket cover is re-tightened.
Why choose the best Stihl ms180c chain?
Choosing the best stihl ms180c chain for you! The chainsaw chain is one of the most important parts on a chainsaw due to the fact that it is responsible for spinning the teeth which creates the cutting surface. If you have ever used a dull chainsaw chain, you know how hard they are to push and struggle with.
How do you tighten the chain on a Stihl chain saw?
Just undo the screw on the sprocket cover, tension the chain and tighten the cover again. STIHL chain saws with chain quick tensioning are indicated by the letter "B" in the model name
How to tension the chain on a chainsaw?
Tensioning the saw chain is very easy with the STIHL chain quick tensioning system. The saw chain can be tensioned quickly and effortlessly by means of the thumb wheel, without using tools. Just undo the screw on the sprocket cover, tension the chain and tighten the cover again.
Do Stihl chains stretch during cutting?
Although Stihl chain-saw chains are pre-stretched by the factory, the chains heat up and stretch slightly during normal cutting operations; consequently re-tensioning is required from time to time while working to prevent unnecessary wear to the sprocket and chain bar. In addition, link rivets eventually wear, causing further stretching.
How to tension a saw chain?
What are the advantages of chain quick tensioning?
About this website
How do I tighten my Stihl chainsaw chain?
0:231:33Chapter 5: Adjusting Your Chainsaw's Chain Tension - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe adjustment screw clockwise until the chain is seated against the bottom rail of the bar.MoreThe adjustment screw clockwise until the chain is seated against the bottom rail of the bar. Continuing to hold the tip of the bar up tighten the bar nuts and rotate the chain by. Hand.
Where is the chain tightening screw on a Stihl chainsaw?
2:277:20How To Adjust Your STIHL Saw Chain - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn this deal ms 170 the chain tensioner screw is located in the front of the saw. Sometimes theMoreOn this deal ms 170 the chain tensioner screw is located in the front of the saw. Sometimes the tensioner can be on the inboard side of the bar. And sometimes on the outboard side depending.
How do you tighten the chain on a Stihl ms181c?
0:020:36How to tension your chain with STIHL Quick Chain Tensioning systemYouTubeStart of suggested clipEnd of suggested clipSimply lift the lever up undo the nut so you've got a bit of movement in the bar. Turn the blackMoreSimply lift the lever up undo the nut so you've got a bit of movement in the bar. Turn the black adjusting wheel forward until the chain comes up nice and snug against the bar.
How do you tighten the chain on a Stihl MS 250?
1:593:30How to Properly Adjust a Chain on a MS250 Stihl Chainsaw - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd root righty-tighty lefty-loosey if you turn this clockwise that will tighten your chain oppositeMoreAnd root righty-tighty lefty-loosey if you turn this clockwise that will tighten your chain opposite way it'll loosen it.
How do you tighten the tension on a chainsaw?
Loosen the bar nuts on the side of the chainsaw guide bar. Insert a screwdriver or chainsaw scrench into the Intenz slot of the guide bar. Turn the screwdriver or scrench clockwise to move the guide bar forward to proper chain tension. Perform a "snap" test to ensure proper saw chain tension.
How do I know if my chainsaw chain is tight enough?
A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can't pull the drive links out of the bar nose.
Why won't my chainsaw chain tighten?
Turn the tension control screw to the right to tighten the chain and to the left to loosen it, instructs eReplacementParts.com. Attempting to turn the tension screw without loosening the nuts first may be the reason you can't tighten the chain. Tighten the nuts back into place when you have the chain properly adjusted.
Why does the chain on my chainsaw keep coming loose?
Chain Not Set Properly One of the most common reasons why your chain might be coming loose is because it was not set properly. When you go through the steps to tension your chain, you need to finish those steps by setting the tension so it won't change as you work your saw.
Why does the chain keep coming off my STIHL chainsaw?
0:101:48Chainsaw Troubleshooting: How to Keep The Chain From Coming Off ...YouTubeStart of suggested clipEnd of suggested clipIf your chain is tension too loose it can come free from the guide bar during use that's bad newsMoreIf your chain is tension too loose it can come free from the guide bar during use that's bad news the chain should never say Grum the bar.
What do you do with a stretched chainsaw chain?
Unfortunately, there is nothing you can do to stop the chainsaw chains from stretching over time. Your chain will constantly change from use, it is just the extent of change that varies. You will notice the most difference when you first get a new chainsaw and chain as it stretches a lot.
What size chain fits a Stihl ms250 chainsaw?
1 (electric chainsaws)....Winter/Summer Shutter.POWER SOURCEGasPOWERHEAD WEIGHT10.1 lbs.GUIDE BAR LENGTH (Recommended)18 in.OILOMATIC® CHAIN.325" RM3CHAIN OIL CAPACITY6.8 oz.3 more rows
How do you tighten the chain on a Stihl MS 170?
0:001:01Quick tip . How to tighten the chain on a Stihl MS170 . - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you want to do is grab your t-wrench. Do about half a turn back on these nuts. Come into theMoreSo what you want to do is grab your t-wrench. Do about half a turn back on these nuts. Come into the screw. Right here next to the bar. And you want to go clockwise. And watch your chain lift.
How do you tighten the chain on a Stihl ms170 chainsaw?
0:001:01Quick tip . How to tighten the chain on a Stihl MS170 . - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you want to do is grab your t-wrench. Do about half a turn back on these nuts. Come into theMoreSo what you want to do is grab your t-wrench. Do about half a turn back on these nuts. Come into the screw. Right here next to the bar. And you want to go clockwise. And watch your chain lift.
Why does the chain keep coming off my Stihl chainsaw?
0:101:48Chainsaw Troubleshooting: How to Keep The Chain From Coming Off ...YouTubeStart of suggested clipEnd of suggested clipIf your chain is tension too loose it can come free from the guide bar during use that's bad newsMoreIf your chain is tension too loose it can come free from the guide bar during use that's bad news the chain should never say Grum the bar.
How do I fix the oiler on my Stihl chainsaw?
2:235:18Stihl Chainsaw Chain Oiler Not Working? Check This First To Fix ...YouTubeStart of suggested clipEnd of suggested clipMake sure it's flush with the oil pump. And this is how it works it spins around with the clutch.MoreMake sure it's flush with the oil pump. And this is how it works it spins around with the clutch. Drum. Then this part goes. In then your clutch goes.
How do you put the chain back on a Stihl ms170 chainsaw?
0:542:33How to Change the Chain and Bar on a Stihl MS170 Chainsaw - YouTubeYouTubeStart of suggested clipEnd of suggested clipCorrectly. Make sure the chain moves in a smooth motion. And it doesn't snag. Place the chain aroundMoreCorrectly. Make sure the chain moves in a smooth motion. And it doesn't snag. Place the chain around the chain sprocket. Make sure the two screws are seated in between the chain bar.
Chain quick tensioning | STIHL
Step 13 of 14: Then check that you have not overtightened the chain.Pull the chain by hand in the direction of rotation (first release the chain brake, otherwise it will not turn). It is essential to wear work gloves when doing this, to avoid the risk of injury from contact with the sharp chain.
Why Is My Stihl Ms180 Chainsaw Not Oiling The Chain?
Sometimes it happens despite having enough lubrication; your chainsaw oiler isn’t working at all.
How Much Bar Oil Should A Stihl Ms180 Chainsaw Use?
Chainsaw manufacturers designed the oil tank to let you use one tank of fuel mix to one tank of oil, or it may sometimes take less oil than fuel.
Why is my chainsaw not getting oil?
Well, in most cases, users found their chainsaw not getting oil because of the clogging of sawdust.
What to wear when cleaning oiler ports?
Wear gloves and protection kits even while cleaning the oiler ports, not only working with your saw.
What does it mean when a chain has an oily film on it?
Also, lift the chain from the drive link, and you would notice oil on them too. The chain has an oily film on it means it’s getting enough oil.
How to clean a chainsaw bar?
Separate the chain from the bar and look for any build-up sawdust or dirt on the bar. Use a knife or flat screwdriver scraping it down to the heel of both sides of the bar guide slot to clean it.
What to do if your oiler won't work?
While adjusting a won’t-working oiler, all you need to check, clean, recheck, and in some cases, replace.
How to tension a saw chain?
The saw chain can be tensioned quickly and effortlessly by means of the thumb wheel, without using tools. Just undo the screw on the sprocket cover, tension the chain and tighten the cover again.
What are the advantages of chain quick tensioning?
Quick and easy: Chain quick tensioning makes it very easy to tighten the chain to the correct tension and to mount the guide bar.
What is the chain on a Stihl MS180?
The chainsaw chain is one of the most important parts of the Stihl MS180. The chain is what makes contact with the wood that you're cutting. If you are having problems getting through a piece of wood, you probably need to change the chain on your MS180.
How to turn off chainsaw?
Turn the chainsaw off by pressing the power button on the side of the saw. Make sure that the saw is completely turned off before you start the replacement.
How to tell if a Stihl MS 180 chainsaw is malfunctioning?
Quite often on a Stihl MS 180 chainsaw, there is a depressurization of the oil line in the place where the oil pipe coming from the tank is installed in the saw body. The malfunction can be determined by the characteristic smudges on the bottom of the tool.
How to check lubrication on chainsaw?
All these signs indicate that the lubrication process is abnormal. In order to check the oil supply by the lubrication system , it is necessary to remove the side tire of the chainsaw and start it. Next, you need to slightly increase the speed while observing the end of the oil line. If oil comes in, most likely its quantity is not enough for normal lubrication and you need to clean or replace the filter and, if possible, adjust the flow. In the case when it does not arrive, the problem is more serious and requires further diagnosis.
Why do chainsaws use oil?
The system uses oil to lubricate the chainsaw chain, which has improved adhesion properties, this is necessary for uniform distribution of oil around the entire perimeter of the tire and hold on it even at high speeds of chain rotation. Let us consider in more detail the oil supply system implemented in modern chainsaws.
How to check oil supply without removing tire?
To do this, it is necessary to direct the end of the tire to the side, for example, of freshly sawn chocks from the cut side and maximize the speed, while you should try to keep the end of the tire at a distance of no more than 10 cm from the chocks.
What is the shade of the chain of a chainsaw?
The chain of the chainsaw is dry and has a pale shade without shine.
How to fix cloves in highway?
You can fix it by installing a corkscrew that is suitable for the diameter of cloves instead of the native corkscrew, cutting it to the required length. Blockage in the highway. It can be removed by blowing with compressed air or mechanically, using a wire of suitable diameter. Clogged filter element.
Can you rinse a Stihl MS 180?
Clogged filter element. The Stihl MS 180, whose pump is not separable, often clogs. You can try to rinse in clean gasoline if it does not help replace it. In Chinese chainsaws (Gypsy), very often cuts the grooves on the main gear, through which the force from the sprocket is transmitted to it.
How to adjust chain tension on Stihl chain saw?
These saws are fitted with a large wingnut on the sprocket cover in lieu of the two studs In addition, instead of a chain-tensioning screw, there’s an adjusting wheel on top of the sprocket cover you can rotate by hand. To loosen the chain bar, flip up the half-moon-shaped wingnut handle upright, grip the handle and rotate the wingnut half a turn counterclockwise. Once the bar is loose, turn the adjusting wheel clockwise to increase chain tension, and counterclockwise to reduce tension, then tighten the wingnut and check for correct chain tension.
Do Stihl chainsaws stretch?
Although Stihl chain-saw chains are pre-stretched by the factory, the chains heat up and stretch slightly during normal cutting operations; consequently re-tensioning is required from time to time while working to prevent unnecessary wear to the sprocket and chain bar. In addition, link rivets eventually wear, causing further stretching. Depending on the model, there are two ways of tensioning Stihl chains. Some require tools, and some can be adjusted by hand.
How to tension a saw chain?
The saw chain can be tensioned quickly and effortlessly by means of the thumb wheel, without using tools. Just undo the screw on the sprocket cover, tension the chain and tighten the cover again.
What are the advantages of chain quick tensioning?
Quick and easy: Chain quick tensioning makes it very easy to tighten the chain to the correct tension and to mount the guide bar.