how do you train a dog to scare an underground fence

The Routine Method

Full Answer

How to train a dog to use an electric fence?

Teaching your dog about the warning signal is the most important part of training your dog to use the electric fence. Hold the leash, walk with your dog to the training flags, and listen for the warning signal. The signal should occur as soon as you and your dog reach the flags. [8]

How do you teach a dog to use an invisible fence?

Teach your dog to come when called using a long leash. Install the invisible fence and set up flags at the invisible fence line. Take your dog on a walk with a long leash and a separate non metal collar, within but near the perimeter of the invisible fence line.

How to find a break in an underground dog fence?

If you think there may be a break in your underground dog fence, there are three effective methods of finding the defect that includes: The order in which you use the methods is essential. You may buy a wire locator to find a break. However, you have to understand how the short circuit method to locate a wire break.

How do I train my dog to walk on a leash?

Begin by walking your pet on a leash in the Pet Area. Calmly praise and talk to your pet and move toward the Boundary Flags. Be sure to keep the mood happy. With full control of your pet on a leash, walk to the flags. As your pet enters the Boundary Zone, the Receiver Collar will begin to beep.

How do you introduce a dog to an invisible fence?

0:082:11Training Your Pet for an Underground Wireless Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipApproach the warning zone. When you hear the alert guide the dog back into the yard and reward themMoreApproach the warning zone. When you hear the alert guide the dog back into the yard and reward them with a treat. Next introduce correction set the transmitter to apply a low level of correction.

How long does it take to teach dog about Invisible Fence?

We suggest at least 14 days of training. Depending on how quickly your pet learns, training could take less time. Your dog might also need longer than 2 weeks. Just don't try to do too much too quickly.

How do I train my dog with petsafe underground fence?

0:168:56How to Train Your Dog on the PetSafe® Containment System - YouTubeYouTubeStart of suggested clipEnd of suggested clipTrain your pet for 10 to 15 minutes at a time. Don't try to do too much too quickly more frequentMoreTrain your pet for 10 to 15 minutes at a time. Don't try to do too much too quickly more frequent short sessions are better than less frequent longer sessions.

Can you train an older dog to use an invisible fence?

Invisible Fence is puppy-friendly for puppies at least eight weeks old. Although, the Invisible Fence dog training age can vary depending on the pet. Our certified trainers work with pets of all ages, breeds, sizes and temperaments, so your dog can learn its boundaries at its own pace.

What do you do when your dog is afraid of Invisible Fence?

Combating Fence FearRemain calm and confident. Do not baby the dog or give any special attention to the fearful reaction. ... Increase playtime and praise in the safe zone. ... Feed your dog in the safe zone to further establish the positive association with the yard. ... Revisit Step 1. ... Slow down the training.

Can a dog cross an Invisible Fence?

Although invisible fences protect dogs by preventing them from leaving the yard, they do not prevent hazards from entering the yard. Stray dogs and wild animals can still access the yard and interact aggressively with pet dogs.

Do underground dog fences have to be a loop?

The answer is no, an electric fence DOES NOT have to make a complete loop. However, there are advantages and disadvantages to completing the fence loop. Creating a continuous loop will increase voltage on the fence line, because power is pushed in both directions.

How deep should underground dog fence be?

The main reasons for burying dog fence wire are aesthetics, protection, and trip hazard. If you are planning on burying the wire we recommend a depth between 3″ and 24″ – burying the wire too deep may begin to alter the signal strength and risks running into other buried lines on utilities in your yard.

Where do flags go on invisible fence?

0:241:17How to Place Your Boundary Flags on the Free to Roam Wireless FenceYouTubeStart of suggested clipEnd of suggested clipPlace a boundary flag in the ground. Walk. Back into the pet area until the tone stops. Repeat. ThisMorePlace a boundary flag in the ground. Walk. Back into the pet area until the tone stops. Repeat. This process until you have marked the boundary zone with a flag every 10 feet.

Do invisible fences cause anxiety in dogs?

Psychological stress to a dog being trained with an invisible fence is very real indeed, and a problem that can lead to health problems later. These can include aggression and panicked behavior. Some dogs simply do not respond to an invisible fence.

Can my dog wear a bark collar and invisible fence?

We do not recommend the use of any ultrasonic bark control product in conjunction with invisible fences (especially not shock fences). Doing so will confuse the dog and cause a lot of frustration for both you and your pup.

How long does it take to train a dog with a wireless fence?

An Overview of Dog Fence Training It should take about 2 weeks for your dog to be happily contained. Without training, the system is completely useless. Training your dog is simple. All you need to do is commit to three 15 minutes sessions every day, for 2 weeks.

At what age can you train a dog on an electric fence?

Young dogs can react unpredictably to electric dog fences, so understanding a puppy's development is essential to deciding when to start training the animal with the fence and collar. Generally, puppies should not be introduced to electric dog fences until they're at least four or five months old.

Do Invisible Fences cause anxiety in dogs?

Psychological stress to a dog being trained with an invisible fence is very real indeed, and a problem that can lead to health problems later. These can include aggression and panicked behavior. Some dogs simply do not respond to an invisible fence.

How do you know if invisible fence is working?

Some invisible pet fences include a battery tester with the fence system. Place this on the collar and walk past the boundary wire. If the tester lights up and you hear the audible warning given by the collar, the battery is functioning properly. If you hear the warning, but no light flashes, replace the battery.

How to keep dogs from getting in the fence?

Take your dog on a walk with a long leash and a separate non metal collar, within but near the perimeter of the invisible fence line. Walk a good distance away from your dog inside the fence line.

How to correct a dog that is too close to the fence?

Take your dog on a walk with a leash and a separate non-metal collar, within but near the perimeter of the invisible fence line. When the collar signals your dog with an audio signal that he is too close to the boundary, correct your dog by moving him away from the invisible fence line.

What happens if my dog ignores me?

If your dog ignores you and proceeds across the fence line, he will receive a corrective stimulus. If he ignores the correction you may need to turn up the level of the corrective stimulus as necessary.

What happens if my dog moves across the fence?

If your dog moves across the invisible fence line he will receive a corrective stimulus. If he ignores the correction, you may need to turn up the volume of the corrective stimulus as necessary, until you dog responds by staying within the boundary in spite of distractions. Reward your dog for retreating when signaled.

How does a dog wear a radio collar?

The dog wears a radio collar that receives transmissions from a radio transmitter that is signaled by the invisible fence. The collar first produces an audible signal to the dog as he approaches the boundary of the invisible fence ,to let the dog know he is at approaching the boundary.

How to train a dog to stay in the yard?

Use of a long leash to help your dog explore his yard, but allow controlled recall and guidance as your dog approaches boundaries, may be employed. You will also need a second non-metallic collar to use with the leash, as using the transmitter collar for leading is not appropriate and metal collars can interfere with radio signal transmission.

How to teach a dog to come when called?

Teach your dog to come when called using a long leash. Install the invisible fence and set up flags at the invisible fence line. Take your dog on a walk with a long leash and a separate non metal collar, within but near the perimeter of the invisible fence line.

How to distract your dog from the safe zone?

Here are some ideas for distractions: Have a family member cross from inside to outside the containment area. Throw a ball or treat outside the safe zone. Have a neighbor walk their pet outside the yard.

How to get a dog to beep in a sandbox?

Begin by walking your pet on a leash in the containment area. Calmly praise and talk to your pet and move toward the Boundary Flags. Keep the mood happy. With full control of your pet on a leash, walk to the flags. As your pet enters the containment area, the Receiver Collar will begin to beep.

What to do if your dog doesn't respond to the static correction?

If your pet does not respond to the static correction, confirm the Receiver Collar is fitting properly. If the Receiver Collar is fitted properly and your pet does not respond to the static correction, increase the level by 1. Watch for slight reactions at first such as ears up, head turned, looking at the ground.

How to train a dog to be a containment dog?

Short, frequent sessions are better than fewer, longer sessions. If your pet shows signs of stress, slow down the training schedule, add additional days of training, or increase the amount of play time with your pet in his new containment area. Pulling on leash toward the house. Ears tucked. Tail down.

How long should a dog stay in a boundary zone?

Allow your pet to stay in the boundary zone for up to 2 seconds, then gently move him out of the containment area. Immediately praise and offer your pet a treat when you move outside his new boundary zone. Repeat this process at the same Boundary Flag, then move on to another flag.

How often should you remove a dog's boundary flag?

Once you feel secure that he understands his boundaries, begin removing every other Boundary Flag every 4 days until all the flags are gone. Save the flags in case you need to use them again in the future to train another pet or to help retrain your pet at a new home.

How to train a dog to be a good dog trainer?

Don't increase the level by more than 1 at a time. Stop and go back to the previous level if your pet shows any signs of fear or distress. Finish each training session on a positive note with lots of praise and play. Even if you think your pet is responding well to the training, complete the entire training.

How to teach a dog to walk along the edge?

Place the boundary flags – In general, you will walk around your yard with the collar. When it beeps or blinks you are getting to the boundary. Place flags along the boundary so there is a visual clue for your dog to learn the edge. Follow your system’s instructions for specifics.

How to train a dog to stay inside the boundaries?

If you have patience you can train your dog to stay inside the boundaries without ever getting shocked. Keep Training Short – Train your dog 15 minutes at a time. Don’t try to overwhelm them. Day 1 – Set the collar to beep or tone. Don’t set it to shock.

How to shock a dog?

Start close – Start with a short leash and lengthen it as your dog learns. Days 2-3 – Repeat with the shock turned on as above. Don’t stress your dog! Start at a lower setting on the first shock day and see how they respond. Go slowly. You want them to notice the shock but not yelp in pain.

What is a shock collar for a dog fence?

If a dog wearing a paired shock collar gets close to or crosses the boundary then the shock collar delivers a beep, vibration, or shock depending on the settings.

How to shock a dog when it is close to the edge?

Don’t set it to shock. Walk your dog around the yard. When your dog is close to the edge and you hear the beep or tone tell your dog to come back and give them a treat. Reward quickly – The boundary beep, call, and treat should happen within 2 seconds.

What happens if a dog wears a shock collar?

The transmitter creates an invisible boundary around your yard. If while wearing the shock collar, your dog crosses this boundary, it gets either a beep, a vibration, or a shock. Instructions below discuss how to train your dog on these devices.

What does "electric fence" mean?

First off some definitions…. Electric Fence – For our purposes, this means the classic electric fence using an electrified exposed wire. If a dog (or person) touches the exposed wire they get a shock. This is most commonly used across the top of a fence to teach a dog not to jump over a fence.

How to train a dog to stop on an electric fence?

Place the training flags within the boundary at the correct distance apart. Your electric fence kit will come with training flags, which are used to teach your dog where it needs to stop and turn around. Place the training flags at the correct distance away from the fence, which will be specified in the instruction manual. Make sure to space the training flags apart by the correct, specified distance too.

How to train a dog to walk out of a boundary?

Get a friend or family member to walk out of the boundary. Keep your dog on the leash and in the collar during this exercise. Make sure that the person doesn’t turn around, look at , or call out to your dog. This is the first part of training your dog to resist distractions and temptations while respecting the warning signal.

How to attach a leash to a dog?

Attach the leash and electric collar to your dog. Follow the manufacturer’s directions carefully and place the electric collar around your dog’s neck. Check that the collar isn’t too tight or loose and that it is positioned correctly according to the diagrams in the instruction manual. Then attach the leash to the non-metallic collar.

How to train a dog to stay on leash?

Follow all of the manufacturer's directions throughout the training process and begin training your dog on a leash. Teach your dog to stop and turn around whenever it hears the warning signal. Then move onto training your dog to resist temptations outside the boundary and to stay in the yard unsupervised.

How long does it take for a dog to learn to use an electric fence?

Training typically takes up to 4-5 months.

What happens if my dog follows someone out past the training flags?

This is a pivotal moment in your dog’s training. If your dog follows the person out past the training flags and out of the boundary, it will receive a small shock. However, if your dog stops and turns around at the training flags, give your dog plenty of praise and rewards.

What to do if your electric fence doesn't go off?

If the signal doesn’t go off at the right point, you may need to rearrange the flags. Check the instruction manual for more details about your specific electric fence system.

How to train a dog to stay away from a fence?

Your dog’s collar should give them an audible warning before they cross the fence. When you install the fence, take your dog out for a walk near the fence boundaries. Call your dog every time they get too close and the warning goes off. If your dog listens to you, reward them with a dog treat or attention. Otherwise, let them get the mild shock. As your dog learns to stay away from the fence, create distractions on the other side. Continue the training until your dog learns to ignore the distractions and step away when they hear the signal.

How Do You Train Your Dog to Use a Wireless Fence?

Not every dog responds to the same training methods, so you can experiment with a few methods to see which one works for you. Here are a few ways you could train your dog to use a wireless fence.

What if Your Dog Still Crosses the Fence?

In extreme situations dogs run through the invisible fence despite the correction, or perhaps as a result of a malfunctioning fence. This doesn’t mean that you have to give up and keep your dog indoors. Instead, you could hire a professional trainer to teach your dog to stay inside the yard. You’re not a bad trainer–some dogs just need more structure and correction than others. A professional trainer could teach your dog to be safe and give you advice during the process.

Do You Need to Set the Dog’s Collar to the Highest Setting?

Some people assume that they need to set their dog’s collar to the most intense shock before they begin. However, many dogs respond to the lowest setting. In fact, some dogs respond to the audible alarm–no shock required. Once you train your dog to avoid the perimeter, you might be able to set their collar to the alarm setting and forget about the shock altogether. As you train your dog, you’ll figure out which stimulus gets their attention.

Do You Really Need a Wireless Fence?

If you have to train your dog to avoid the perimeter, you might wonder if you could skip the fence altogether and just train your dog to stay inside the yard. However, you never know when your dog might bolt out of the yard to catch a squirrel or greet someone jogging in the road. Even the most well-trained dogs need physical stimuli sometimes, especially if they get distracted.

How Do Wireless Fences Work?

Many owners wonder how wireless dog fences work. When you buy a wireless fence, you’ll install a wire underground that surrounds the perimeter of your yard. Each fence comes with a “shock collar” for your dog. Every time your dog approaches the perimeter, the fence transmits a signal to the color. The collar might sound like a warning if your dog hasn’t crossed the fence yet. If your dog steps over the fence, the collar might give them a light shock. For this reason, you’ll need to make sure that your dog wears the shock collar when they go outside–a regular collar won’t work.

Who Could Use an Invisible Fence?

Virtually any guardian could use an invisible fence. However, here’s a few people who might need an electric fence in particular:

How Does an Underground Fence Work?

The invisible fence system consists of three major components as follows:

Examining Uncovered Ground Wires

The best point to start with is visual inspection; finding the break in the wire with your eyes before moving to complicated methods. If you marked the whole boundary before burying the wire, spotting a breakage will be much easier since you’d be more than sure about the precise location where your electrical wires are lying.

Performing a Short Loop Test

So you couldn’t find damage by visual and physical check, and your transmitter is still beeping madly, indicating a breakage?

Scanning For a Break Using Radio Signals

After ensuring about the wire break, if you still don’t want to dig the entire yard out to locate the breakage, then it’s okay since we have an alternate way – The wire break locator.

Testing Wire Continuity with a Multi-Meter

Multimeters are simple to use digital meters that mainly work to measure the small electrical values in different units like the voltage, resistance, current, etc. Using this method, one may figure out whether the damage is in the wire or any other part of the system.

How to Join and Repair Electric Dog Fence Wire?

So now, that you’ve located the breakage, it’s time to fix it so you can once again live like other carefree dog owners. To fix the break, all you need to do is to follow the given simple steps:

Final Thoughts

There is no doubt that finding a break in a huge invisible fence wire is no less than finding a needle in a haystack, but if you know the right methods and employ the appropriate strategy, the whole process becomes much easier.

Three Different Methods Of Finding A Break

If you think there may be a break in your underground dog fence, there are three effective methods of finding the defect that includes:

Steps For Short Looping Method With An Extra Wire

Do a physical check by walking the area of the wire. Look for damage or trees that are uprooted.

Steps for Using A Wire Locator

To find the break turn off the underground transmitter. Connect the clips on the wire locator to the underground wire, using different clips for the underground transmitter in and out wires.

Steps For Finding A Break In An Underground Fence Using An AM Radio

The AM radio method is also known as the spark plug method. If you don’t have a wire locator, you can try this do-it-yourself method. You find the break in the underground dog fence wire using an AM radio and a lawnmower spark plug. The lawnmower becomes the transmitter and the radio locates the wire.