Transfer your image onto stone
- Clean the surface of the stone. Remove any dirt or dust.
- Place the stone on top of the image and roughly trace the outline of it using a pencil. Then cut out the image with scissors.
- Optional: Apply a coat of acrylic paint on the stone. Paint the area when the image will be and then wait till the paint dry. ...
- Apply an even layer of gel medium (on top of the paint). Here we use matt gel medium but Modge podge or any clear acrylic medium would work too. ...
- Quickly place the image face down onto the stone when the medium is still wet. Press firmly to make sure the image is adhered.
- Gently smooth out any air bubbles and remove wrinkles as much as possible.
- Allow it to dry completely.
- Clean the surface of your stone (remove any dirt, oil, grime, etc.)
- Apply a layer of acrylic polyurethane (or transfer gel)
- Quickly apply your laser-printed design, FACE DOWN onto the wet surface.
- Using your hand or paper towels, work air bubbles out to the edges.
How do you transfer photos from paper to stone?
Let the water soak into the paper, until you start to see the image through the back. Carefully peel the paper away. OPTIONAL: Apply a coat (or several) of acrylic polyurethane over the image to protect it. Watch the video to see the photo-to-stone transfer techniques performed.
How do you print photos on stone?
Using an inkjet printer, print your chosen photos. You can choose to print in color or black and white. Either way will work for transferring onto stone. Remove the tissue paper from the copy paper and then trim your photo to fit the selected stone.
How do I protect the image on the photo-to-stone transfer?
OPTIONAL: Apply a coat (or several) of acrylic polyurethane over the image to protect it. Watch the video to see the photo-to-stone transfer techniques performed.
How do you protect a photo from the inside of stone?
OPTIONAL: Apply a coat (or several) of acrylic polyurethane over the image to protect it. Watch the video to see the photo-to-stone transfer techniques performed. Did you make this project?
Can you transfer a picture onto concrete?
Modge Podge surface 2. Place color photocopy or photo printed out on a inkjet printer 3. Wait 12-24 hours 4.
How do you transfer pictures to Slate?
3:144:38How To Create Custom Photo Slates - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd press after eight minutes open your machine and allow the slates transfer to cool down for aMoreAnd press after eight minutes open your machine and allow the slates transfer to cool down for a moment. After it's cooled flip the transfer over and then quickly peel the transfer.
What makes a printer sublimation?
So how does sublimation work? Well, sublimation printing uses heat to essentially bring ink and fabric together as one. First, a design is printed onto special paper. The inks that are used turn into gas when brought under heat, then combine with the fabric and permanently print onto the fabric.
How do you transfer photos to tile coasters?
Cut your photo so that there's minimal white space around the edges. To prep the tiles, wipe with a damp towel to remove any dust. Brush a light coat of Mod Podge on both the tile and on the photo (the front of the photo, NOT the back). Place the photo onto the tile, taking care to line up the photo with the tile.
How to make a laser print on stone?
Step 1: Step 1: Transfer Your Image to Stone. STEPS: Clean the surface of your stone (remove any dirt, oil, grime, etc.) Apply a layer of acrylic polyurethane (or transfer gel) Quickly apply your laser-printed design, FACE DOWN onto the wet surface . Using your hand or paper towels, work air bubbles out to the edges.
How to dry a photo on a paper?
Let dry for a couple of hours, depending on your heat and humidity. ONCE DRY, apply water using a soaked sponge or paper towels. Let the water soak into the paper, until you start to see the image through the back. Carefully peel the paper away.
What do you need to personalize a stone?
To further personalize your stone, you’ll also need a photograph and a way to seal your photo. Laminate, Plexiglas, clear glass, or small glass beads or gems, depending on the size of your photo, all work nicely.
How to personalize stepping stones?
Personalize your stepping stones by adding a photograph to reflect your style and personality.
How to laminate a photo?
If you don't have access to a laminator, use two pieces of clear glass or Plexiglas. Simply put glue on both sides of your photo and "sandwich" the photo inside the glass.
What is the best material for making a stone step?
Larger ones are more practical for actual stepping use. A bag of smooth concrete and various decorative items provide the main materials for making a stone.
How to get a photo ready for sealing?
Get your photograph ready by placing it in the material you are using to seal it from weather and the cement. Whatever material you choose to use, about a ½-inch space around the photo for sealing or embedding it into the cement. Laminating your photo is simplest.
Step 1
Choose your stone or piece of metal. Keep in mind that an image will show up better on a light surface.
Step 2
Prepare the surface: Wash or wipe it down; scrub it if necessary to remove loose particles. Degrease it with rubbing alcohol if necessary.
Step 3
Coat a metal surface with two coats of spray polyurethane and allow it to dry fully (to seal the surface and prevent it from rusting).
Step 4
Coat a stone surface or sealed metal surface with two coats of acrylic matte medium and allow it to dry fully.
Step 1
Coat the image side of a high-quality photocopy (color or black and white) or an image from a newspaper or magazine with six to eight coats of acrylic matte medium. Make sure you don't get any medium on the back side of the image.
Step 1
Soak the coated image in lukewarm water for several hours or overnight.
Step 4
Rub the paper backing off the plastic-like surface gently. The toner of the photocopy image or ink from the printed image should stay embedded in the plastic-like surface of the acrylic matte medium while the paper rubs away. (You may need to do this partly in the tray of water.)
How to transfer a picture onto a stone?
Transfer your image onto stone. Clean the surface of the stone. Remove any dirt or dust. Place the stone on top of the image and roughly trace the outline of it using a pencil. Then cut out the image with scissors. Optional: Apply a coat of acrylic paint on the stone.
How to make a photo for a stone?
The process is simple – print out your photo, use a gel medium to apply the photo to a stone, then finish it with a clear spray. You can find all the supplies you need at your local craft store.
How to get a picture off of a paper?
Soak a sponge in water and wet the back of the image. Then use our fingers to gently rub the paper to peel it away until the transferred image appears. Be careful not to press too hard or you will scrape away the image underneath. Use a clean rag to lightly wipe the scrap of paper fibers.
Can you crop a photo before it's transferred to wood?
Get your FREE trial today! With PaintShop Pro, you can crop, straighten and resize your photo, and reverse the image before it’s transferred onto wood. You can also enhance the colors, clean up any blemishes and add special effects. Give your photo transfer an aged look by using a black and white or sepia photo.
