- Test The Pool The first step in treating a pool filled with well water is to simply test it first. ...
- Fix The pH Levels Next, you need to fix the pH levels with the results as your basis. ...
- Fix The Alkaline Levels Once the pH is already fixed, the next thing to adjust is the alkaline levels. ...
- Fix The Chlorine Levels When that’s done, you also need to fix the chlorine levels. ...
- Chelate The Pool Chelating the pools will take out the metals. ...
- Do The Final Test
How do you care for a swimming pool?
Quick Tips for Vacuuming & Brushing Your Pool
- Always skim out as much debris as you can manually before you begin vacuuming to save wear and tear and clogging of your unit. ...
- Vacuum your pool at least once a week to keep it clean and algae-free.
- Brush your pool before you vacuum to loosen up debris or algae spores, making it easier for the vacuum to remove.
How do you treat an above ground pool?
What Do You Do After an Above Ground Pool Is Filled With Water?
- Learn about how to prevent drowning and pool chemical injuries. ...
- Turn on the filter. Once you've got all the items on the safety checklist marked off, it's time to get started. ...
- Vacuum and skim off debris. ...
- Test the water, and then test it again. ...
- Enjoy your pool, but safely! ...
How to maintain and service a swimming pool?
A swimming pool should be well maintained and serviced to avoid contamination. Important guidelines to follow in order to maintain a good swimming pool for your home includes chlorination, filtration, maintenance of a good range of PH concentration, the safety of the pool, proper water supply and regular testing.
How to maintain my pool?
A Beginner’s Guide to Pool Maintenance
- Good Pool Maintenance Begins with Knowing Your Pool. Before you can properly enjoy or care for your pool, you might need to brush up on all the parts of your ...
- The Basic Components of a Swimming Pool. ...
- The Three C’s of Proper Pool Maintenance. ...
- Create a Maintenance Schedule. ...
- Come on In, the Water’s Fine—Thanks to You. ...
What chemicals do I need to add to a freshly filled pool?
Chemicals Needed for Pool Start UpsStain & Scale Preventer.Granular Shock Chlorine.Chlorine Tablets.pH Increaser and/or pH Decreaser.Alkalinity and/or Calcium Increaser.Cyanuric Acid (Stabilizer)Algaecide and Clarifiers if needed.Complete Test Kit or Test Strips.
What is the first thing you do after you fill a pool?
Start the filtration system immediately when the pool is filled to the middle of the skimmer or specified water level. Your local water supply may be acidic, murky, extremely hard or even cloudy. Once your pool is full, test the water using your test kit or test strips to get a good idea of what you'll be working with.
Do you need to shock a newly filled pool?
1:062:55Should I Chemically Chlorine Shock My Newly Filled Swimming Pool ...YouTubeStart of suggested clipEnd of suggested clipSo you shock the pool allow the filter to run for about ten hours one full turnover of the waterMoreSo you shock the pool allow the filter to run for about ten hours one full turnover of the water that has to be sure that all the water is treated and then make another do another test.
How soon can you swim in a newly filled pool?
Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you'll only be adding liquid chlorine, it's generally safe to swim after about 4 hours or until levels are 5 ppm or lower.
How do you start a pool for the first time?
3:416:38How to OPEN An ABOVE GROUND POOL in 11 Steps | Swim UniversityYouTubeStart of suggested clipEnd of suggested clipSo first you want to add back all the plugs to the drains. And the pressure gauges to your poolMoreSo first you want to add back all the plugs to the drains. And the pressure gauges to your pool filter system pump and other equipment. Now you'll need to attach your system's hoses to your equipment.
How do I shock my pool for the first time?
How do I shock my pool?Check that the pH levels in your pool are balanced.Prepare shock ahead of time in a 5-gallon bucket of pool water and stir.Ensure the pool pump is running. Pour the mixture from the bucket into the water around the edges of the pool.Let the pump run for about 6 hours or more and test the water.
Can I add chlorine while pool is filling?
The short answer to your question is, yes, you want to put a "start-up" dose of chlorinating agent into your pool to get it to the proper chlorine level (or slightly higher); from there, a "maintenance" dose of chlorine such as from the tablets will keep the proper level.
How do I balance my pool after refilling?
7 Steps to Balance Pool WaterTest and Adjust Total Alkalinity. ... Test and Adjust pH. ... Measure and Adjust Calcium Hardness. ... Add Sanitizer to Your Water. ... Check and Adjust Cyanuric Acid. ... Measure Your Water's Total Dissolved Solids. ... Shock Your Swimming Pool.
How do you chlorinate a new pool?
2:225:04How To Safely Add Chlorine to a Swimming Pool | Orenda ProceduresYouTubeStart of suggested clipEnd of suggested clipTo properly add kal hypo chlorine first determine how much you need to add based on the gallonage ofMoreTo properly add kal hypo chlorine first determine how much you need to add based on the gallonage of your pool. Then dissolve the appropriate amount into a 5-gallon bucket of water.
How much chlorine do I add to my pool for the first time?
If you're adding chlorine for the first time, add the amount of product required to achieve a free available chlorine level of 2 to 3 ppm. The instructions will let you know how much to use to raise levels by 1 ppm per 10,000 gallons (38,000 L) of water.
How do I balance my pool after refilling?
7 Steps to Balance Pool WaterTest and Adjust Total Alkalinity. ... Test and Adjust pH. ... Measure and Adjust Calcium Hardness. ... Add Sanitizer to Your Water. ... Check and Adjust Cyanuric Acid. ... Measure Your Water's Total Dissolved Solids. ... Shock Your Swimming Pool.
How much chlorine do I add to my pool for the first time?
If you're adding chlorine for the first time, add the amount of product required to achieve a free available chlorine level of 2 to 3 ppm. The instructions will let you know how much to use to raise levels by 1 ppm per 10,000 gallons (38,000 L) of water.
How to treat a pool with chemicals?
1. Test Your Pool. The first thing that you want to do is test your pool. You can do this by getting a pool test kit so you could see the chemical levels of your pool. 2. Add The Necessary Chemicals. Depending on what treatment you want to do, it’s now time to add the necessary chemicals.
How Often Should You Treat Your Pool?
Before we go to the guide, let’s first answer the question that a lot of beginners tend to ask. This is the question, “how often should you treat your pool?”
How to balance chlorine levels?
To decrease the hardness, you can just add softer water until it’s balanced. 3. Adjust The pH Levels.
How to maintain a pool?
In order to maintain your pool and make sure that the water remains clean and well-balanced, you need to treat it by making sure that all the chemicals in the pool are well-balanced. Beginners may find this process a little challenging because it sounds pretty foreign. However, it’s actually not that hard.
Can you use salt water in a pool?
First, let’s talk about how to treat pool water with salt. This method is actually best for saltwater pools since this method uses salt to create chlorine. With salt, you can actually avoid using chemicals of any kind. This is the best treatment for those who don’t want a highly chlorinated pool.
Is it hard to treat pool water?
As you can see, it’s definitely not hard to learn how to treat pool water for the first time. All you have to do is follow the steps that we provided above plus the guidelines we also included. If you do this, then your pool is as good as clean.
What is pool water treatment?
When it comes to pool water treatment for new pool water, you have to test the water to make sure its suitable for your pool.
What is the best way to keep your pool from slime?
Pool Water Treatment Options. In order to keep your pool protected against bacteria and slime, you need a good water treatment option. When it comes to pool water treatment, you have a couple of options to choose from. Bromine: If you are allergic to chlorine, bromine is a great alternative to chlorine. You don’t have to test your pool as much ...
What happens if you add too much chlorine to your pool?
When you add too much chlorine to your pool, it can irritate your skin and eyes and in serious cases, it can exacerbate asthma and irritate your lungs. What can I use to stabilize my pool? If you have put too much chlorine in your pool, stop adding chlorine to your pool and leave your pool uncovered so the sun will remove some of the chlorine.
What is the pH of a pool?
The pH of your water needs to lie somewhere between 7.2 and 7.6. If the pH of your pool water is off, you can either add more chlorine or pH increaser if the pH is too low or you can add a pH decreaser if the pH is too high. While the pH of your pool is really important, there are other chemicals that are needed in your pool.
How to balance pool water?
How Do I Balance My Pool Water? The way that you balance out your pool water is to test and adjust the. alkalinity, adjust the pH, regulate the calcium hardness, and then sanitize the pool with your preferred pool water treatment .
How to raise cyanuric acid in pool?
To raise the levels, you will use add a stabilizer. After all of the chemical levels have been checked and added, you will need to raise the chlorine levels. The fastest way to do this is to shock ...
How much calcium hardness is needed for pool water?
For calcium hardness, it needs to be between 180 and 220 ppm. Just adjust those levels when they are too low, you can use a calcium hardness increaser. Pool water has pretty high levels of calcium hardness, so getting them higher is usually not an issue.
How to remove metal from pool?
Chelating the pools will take out the metals. Sequestering agents do this by simply putting all the metals together in a few spots so that they’re easy to remove. Once the metals are lumped in several spots, use your pool vacuum to clean them out.
How to increase pH in pool?
To increase the pH level, simply put soda ash to the pool. To decrease the pH level, put a mix of muriatic acid and water. 3. Fix The Alkaline Levels. Once the pH is already fixed, the next thing to adjust is the alkaline levels. The best way to do this is to simply add some baking soda. This will increase alkalinity.
Why is my pool cloudy?
That’s why it’s not unusual for well water to have high levels of copper, iron, and calcium. Due to this though, your pool may become cloudy and murky. What’s more is that the minerals and metals can stick to your hair and body. It’s for those reasons that pools filled with this kind of water need to be treated.
How to test a well water pool?
1. Test The Pool. The first step in treating a pool filled with well water is to simply test it first. You need to test the pool water for pH and chlorine. This can be done via a four-way strip test. Just put the strip into the pool and results will show in around 3 minutes. You can see the pH, alkaline, and chlorine levels through the strip. 2.
Why is my pool water turning brown?
Another issue with using well water is that it is usually shared among the residents. If your pool is pretty big, then you need to use up a lot of water. This will present a problem if you need to refill your pool every so often when your pool water turns brown.
Is it easier to treat a pool than a newly filled well?
You see, maintenance treating is much easier on the pool than treating newly filled well water. So, make sure that you follow our steps so that you don’t need to suffer from metals or minerals sticking to you. We hope that you enjoyed our little guide on how to treat a pool filled with well water.
Can you fill a pool with well water?
If you happen to live in the rural areas and you have a pool, then you probably have experience filling it up with well water from drilled wells. While most wells are maintained regularly, well water does contain a lot of metals and minerals. That’s why it’s not unusual for well water ...
How to make a pool safe for everyone?
Follow these steps to make your backyard pool safe for everyone: Take Steps To Prevent Injuries. Pool drowning is real and there are serious consequences of chemical injuries. So, you must take preventive measures against drowning and injuries from pool startup chemicals.
How long does it take for a pool to harden?
Answer: 28 days on average. Within this time, your pool strengthens and hardens and you can measure the strength of the concrete by measuring its PSI.
What happens if the pH of a pool drops below 7.2?
To make the chlorine more effective to neutralize the germs, if you let the pH level drops below 7.2, the swimmers will gradually become uncomfortable and all the equipment in the pool will start corroding. Of course, to sanitize your pool, chlorine plays a great role and it’s very easy to use.
Why is my pool green?
The most plausible reason why you have a green color to your freshly filled pool is copper or iron, whatever may be the case, most likely, you have a lot of metals in the water.
How long does it take to test a pool?
Answer: Approximately, 7 days. This is of course the average time, but you must test your pool water first to determine everything is okay.
When you use chemicals for pool start up, must you ensure the water quality?
When you use some chemicals needed for pool start-up, you must ensure the water quality. You can’t just let anybody swim in the pool until the water is tested. You must ensure the water is chemically balanced. You should definitely check the pH level and chlorine to ensure water quality.
Can you use a skimmer to clean a pool?
You can use your pool skimmer to remove any floating debris from the pool too. But for the bottom of the pool, there are plenty of sources to learn how to remove sediment from the bottom of the pool which you can right away. When you use some chemicals needed for pool start-up, you must ensure the water quality.
How long after you start a pool should you add chemicals?
IMPORTANT NOTE: ALWAYS ADD THE CHEMICAL TO THE WATER, NEVER WATER TO THE CHEMICAL. The first couple of weeks after starting up your pool is the time to make sure everything is running right. You will need to check your water readings more often in the beginning.
How to prevent a bowl ring in a pool?
Based on temperature and type of finish, fill the pool to the middle of the skimmer or specified water level without interruption and as rapidly as possible with clean water, to help prevent a bowl ring. Be sure to place the hose in the deepest area with a clean rag on the end to prevent damage to the surface material.
What is the best chemical to use for a pool?
Sanitising Your Pool. The next start-up chemical you will need is sanitiser, the most common of which is chlorine . Chlorine comes in many easy-to-use forms – solid tablets, liquid and granules – and is available from several retail outlets.
Why do you shock a pool?
Keep swimmers out of the pool while shocking, as chlorine at elevated levels can irritate mucous membranes and cause general discomfort.
What is the pH of a pool?
pH directly affects a whole variety of factors, and a good pH falls within a narrow band of 7.2 – 7.6. Follow the recommended amount (based on your pool volume size), add the amount you need and then re-test after the one full turnover (usually 12 hours).
When to start filtration system for pool?
Start the filtration system immediately when the pool is filled to the middle of the skimmer or specified water level. Your local water supply may be acidic, murky, extremely hard or even cloudy. Once your pool is full, test the water using your test kit or test strips to get a good idea of what you’ll be working with.
Can you use algaecide on algae?
Lastly, make sure you add some algaecide for good measure. Most people think algaecide is only for when you see algae. However, it should also be used as a preventative treatment. Use an algaecide before you have a need for it, and keep the nasties at bay.
How to add stain and scale to pool?
Add Stain & Scale chemical first, especially for new plaster. Add one chemical at a time, using a pool brush to distribute. Run filter pump while adding chemicals to circulate. Re-test the pool water after 8 hours of filter run time. Add chlorine shock when the sun is not directly overhead.
What is included in a pool start up kit?
Start-Up Kits for pools contain Stain & Scale, Pool Shock, Algaecide, Clarifier and Sun-Sorb oil absorbing sponge. Bundled pool start-up chemicals saves a considerable amount over purchasing items separately.
What is the best calcium level for a pool?
Calcium Adjustments: For pools in hard water areas, tap water of 400-600 ppm is not uncommon. The range of 180-220 ppm is somewhat flexible as many pools operate with much higher calcium hardness levels, without a problem. If your water is soft however, below 180 ppm, this can cause aggressive water conditions, causing etching, staining and deposits. Add Calcium Hardness Increaser to raise calcium hardness levels.
What to do if your TA is above 120?
If your TA is above 120 ppm, use pH Decreaser to reduce levels within range. pH Adjustments: When pH is too low, your chlorine works very well, but when it dips below 7.0, the water becomes acidic and slightly corrosive.
How to find the water balance of a pool?
To find out the water balance of your source water, just use a pool test kit or test strips. Be sure that your kit or strips are fresh, last years supply may produce inaccurate results.
When to add chlorine shock?
Add chlorine shock when the sun is not directly overhead. Add algaecides last, after chlorine level drops below 3 ppm. See our Pool Start-Up Kits for all the chemicals needed. Once the pool is opened, you will need to circulate, filter, clean and treat the pool water - every day.
Does tap water stain pool?
That depends on the water balance of your source water - some tap water makes excellent pool water, while other sources need major adjustment, for water balance that works well with chlorine and won't stain, scale, fade or corrode your soft and shiny pool surfaces.
