Taking off a Common Toilet Seat
- 1 Open the bolt caps to gain access to the seat fasteners, if necessary. These are located at the back of the seat, where the seat hinges. ...
- 2 Grip the nut fastening the bolt firmly. You should find a nut screwed onto the threaded end of each bolt. ...
- 3 Unfasten the bolts with the appropriate tool. ...
- 4 Remove the seat from the toilet. ...
Full Answer
How do you remove an old toilet seat without damaging it?
Removing the Old Seat Pop off the bolt caps, if necessary. Look at the edge of the old toilet seat, near the tank. Loosen the nuts. Hold your adjustable wrench and look underneath the edge of sides of the toilet bowl. Remove the old seat's bolts. The bolts at the base of the hinges on top of the toilet bowl may be slotted for a screwdriver.
How do you lock a toilet seat to the toilet bowl?
Line up the seat on the toilet bowl so the hinges are directly above the bolts. Set the seat in place and press down hard on the hinge caps until you hear them click into place. Twist the hinge caps back to center to lock the seat onto the bolts.
How do I replace the bolts on my toilet seat?
Open the bolt caps to gain access to the seat fasteners, if necessary. These are located at the back of the seat, where the seat hinges. Some toilets may not have plastic covers for the bolts. If yours does, open these covers by prying upwards on them with your finger or a screwdriver. Use light pressure when opening the bolt covers.
How to install a new toilet seat?
Remove the seat from the toilet. Collect the nuts, bolts, and any loose plastic or metal hardware (like the bolt covers) that also go with the seat. Put these small pieces into a sealable plastic bag and tape them to the seat so they don’t become lost. Your toilet seat is removed, now you can install a new one. [5]
How to remove toilet seat?
How to fix a crack in a toilet seat?
How to hold a nut in place?
How to tighten a toilet bolt?
How to break a toilet nut?
How to protect a toilet seat from scratches?
Why are the nuts on my toilet seat not sliding?
See 4 more
About this website
How do you release a toilet seat?
Most modern toilet seats will have a quick release button to help you take it on and off easily. Press the button and lift the seat up. With a screwdriver, lift up the seat fixing caps to get to the bolts underneath.
How do you unlock or remove a toilet seat?
0:070:55Bemis Easy•Clean & Change™ Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipBetter hygiene couldn't be simpler when the cleaning is done simply snap it down and twist theMoreBetter hygiene couldn't be simpler when the cleaning is done simply snap it down and twist the hinges to the locked. Position. It's back in place just as securely as before.
How do you unlock a toilet hinge?
Ensure the hinge caps are in place on the toilet seat. Twist the caps to the left. Grasp them under the two "wings" on either side of the cap and turn the back of the cap toward the left to "unlock" them.
Why can't I unscrew my toilet seat?
If the nut won't budge, douse it with a penetrating spray lubricant such as WD-40. Hold a rag behind the nut to catch the overspray. Give the lubricant 15 minutes to penetrate, then try again. If the bolt spins as you turn the nut and doesn't loosen, or the bolt just spins, go to the next option.
What is a lift off toilet seat?
Lift-off seats: maximum hygiene in sanitary ceramics This system for sanitaryware consists of seats which are very simply undone regarding their removal, through an extraction by pulling gently with one hand from the seat placed in the open position.
What are the different types of toilet seat fittings?
Types Of Toilet Seat Fittings There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
How do you remove a tight toilet seat?
First, open the hinge caps. Next, reach beneath the bowl and use a wrench to loosen the STA-TITE nuts. After a few turns, you should be able to finish loosening them by hand. After they are free, set them aside and remove the bolts, then lift the seat off the bowl.
How do I remove Bemis locking toilet seat?
0:214:47Bemis Easy Clean and Change Toilet Seat Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first step will be to remove the old toilet seat so you pop up this latch right here and itMoreThe first step will be to remove the old toilet seat so you pop up this latch right here and it reveals a bolt you can put a screwdriver in and unfasten so unscrew these plastic bolts then remove the
How do you center a toilet seat?
First, open the hinge caps and locate the bolts. If your seat is out of alignment, now is the time to center it on the bowl. Holding the seat in place, look under the bowl. If the bolts are attached by wing nuts, use your screwdriver to hold the bolt in place while manually tightening the wing nuts.
How do you remove a stuck plastic lock nut?
One of the best ways to remove a difficult lock nut is by using plumber's grease. Simply apply the plumber's grease to lubricate the plastic nut, then let it sit for 10 to 15 minutes. Once that has sat for a while, attempt to remove it using your hands or a pair of pliers.
How do you remove the bolts from a Kohler toilet seat?
0:442:11KOHLER Toilet Seat Anchor Kit 1461673 Replacement InstructionsYouTubeStart of suggested clipEnd of suggested clipUsing a phillips screwdriver unthread the bolts holding the toilet seat in place. If the anchorMoreUsing a phillips screwdriver unthread the bolts holding the toilet seat in place. If the anchor spins and the bolt cannot be unthreaded. Press the teeth of the stabilizer.
How do you take a seat off?
0:025:08How To Remove Front Seats From a Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow most cars the seat is bolted to the floor with bolts at the front and the rear. End this citronMoreNow most cars the seat is bolted to the floor with bolts at the front and the rear. End this citron is an example. There's the bolts that hold in the rear end of the seat slider. Slide the seat.
How do you remove a toilet seat from metal hinges?
Removing Seat with Metal Hinges You could use a socket wrench to get a deeper, firmer grip on the metal hinges then use your hands to unwound the wingnut underneath the toilet. The socket should be about half an inch wide so it can fit over the bolts easily.
How do you remove a metal cap from a toilet seat?
Removing Toilet Bolt Caps You'll need a tool with a flat edge that you can work under the cap. A flat-head screwdriver is ideal, especially one with a long handle for better prying, but a metal putty knife or even a kitchen knife will work. Slip the edge of the blade under the cap and pry upward.
How do I replace the hidden bolts on my Kohler toilet seat?
0:011:12Installation - Quick-Release Toilet Seats - KOHLER - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow place the seat so the bolts are lined up with the holes in the toilet. Hold the bolts in placeMoreNow place the seat so the bolts are lined up with the holes in the toilet. Hold the bolts in place and push the self centering nuts onto the bottom of the bolts.
How to remove toilet seat?
It’s a good thing most toilet seats can be removed easily by unfastening their connecting nuts and bolts. Should the hardware fastening your seat resist your best efforts, detach the stubborn seat with a socket set, a hacksaw, or a drill. Prevent corrosion and make the next removal easier by maintaining the seat through regular cleaning and by replacing worn out parts.
How to fix a crack in a toilet seat?
Fill small cracks in wooden toilet seats with white or clear silicone to prevent buildup of bacteria. For large cracks, remove the seat and fit a new toilet seat in its place. Avoid using bleach to clean wooden toilet seats, as it can damage the wood as well as the metal hinges and bolts.
How to hold a nut in place?
Grip the nut fastening the bolt firmly. You should find a nut screwed onto the threaded end of each bolt. Some nuts may have a shape similar to a wingnut, allowing you to hold it in place by hand. If you have a weak grip, the nut is not wingnut-shaped, or the nut is stuck, try gripping it with a pair of pliers or vice grips.
How to tighten a toilet bolt?
Rubber bushings can be bought at your local hardware store or home center. Slide the circular, rubber bushings up the threading side of the bolt with the tapered side of the bushing facing up at the toilet. Then tighten the nut with the tightening tool that came with the bushings.
How to break a toilet nut?
Some toilet designs may require a deep socket or socket extension for you to reach the nut. Turn the socket counterclockwise firm ly to break the nut loose. Apply steady moderate force with your socket wrench. If the nut doesn’t loosen, intensify the force on your wrench to high for a very short interval.
How to protect a toilet seat from scratches?
Take a broad knife, like a putty knife, and position it so it covers the porcelain of the toilet around the head of a bolt. This will protect against accidental scratches when you saw. Cut away at the hardware fastening the seat to your toilet a little bit at a time with the hacksaw. This process may take a while.
Why are the nuts on my toilet seat not sliding?
If the toilet seat isn't sliding around, the nuts are tight enough. You don't actually want to overtighten those nuts, since you may end up cracking the porcelain . If that happens, you're going to need to buy a new toilet!
What is the best way to unclog a toilet?
Dish detergent, enzyme-based drain openers are the best and safe to use to unclog a toilet.
How to flush a toilet bowl when it doesn't resemble a toilet?
If it doesn’t resemble to be managing, flush the toilet thoroughly. Apply a little extra pressure on the bowl to fill it along with suction.
How to cover a toilet with cling film?
Lift the toilet lid and wrap the cling film around and top of the porcelain bowl. Make sure the film coverup the toilet perfectly and create an airtight space.
How to remove grease from a mug?
Take a mug and pour a half mug of dishwasher or soap water, which claim to remove dirt oil and grease substances.
Does salt unclog toilets?
Then I used Salt to unclog a badly clogged toilet. It works very well. Some professional plumbers also recommended salt.
Is a clogged toilet a misery?
A clogged toilet may be a complete misery. And, for some reason, it always appears to happen at the most inconvenient time.
Can you use a plunger to break a clog?
You have exhausted to use the plunger, even it does not break the clog – try washing up liquid. Before trying it, plunge once if possible.
How to get stuck bolts off toilet bowl?
If the bolts are still stuck, use your small hacksaw to saw them off. Place the blade just under the toilet bowl, at the top of the nut, and gently saw back and forth until you cut the bolt all the way off.
Where are the bolts on a toilet seat?
Since the toilet seat is in place exactly where the previous seat was, these holes will also be positioned directly on top of the holes in the top of the toilet bowl. Drop the bolts through the holes in the hinges and bowl, with the head of the bolt on top.
How to tighten a toilet bowl nut?
Look at one side of the toilet bowl. You should now see the end of one of the bolts sticking down through the top of the bowl. Turn the nut onto the bolt (clockwise) until it is as tight as you can get it by hand. Use your adjustable wrench to tighten the nut just a bit further.
What happens if there are no bolt caps on a toilet seat?
If there are no bolt caps, you will just see the bolts themselves attaching the hinges of the seat to the toilet bowl.
How to measure for a toilet seat?
Most toilets are standard sized, and any replacement seat should fit. If you want to be extra sure, take a tape measure to check the distance between the bolt holes in the toilet bowl. Then make sure the distance between the bolts on the replacement seat is the same .
How to get old toilet bolts out?
If so, they may not come out easily. Don’t panic -- you have some options! First, spray WD-40 on the threads of the rusted bolts. Let it sit for 10 minutes, then try again to remove the bolts.
What to do if you crack a screwdriver?
If you're tossing the whole thing anyway, break them. If you crack them, you can wedge the screwdriver in there to get it the rest of the way off.
How to Take a Toilet Seat Off?
To start with the process of taking the toilet seat off, you’ll need to have the following tools with you.
How to Remove a Toilet Seat with Hidden Bolts?
In some toilets, the bolts and hinges are often hidden, manufactured with the thought of making NO compromise over the beauty and appearance of the toilet. But, in that case, also, you can remove a toilet seat easily.
What causes a toilet seat to loosen?
A loosened toilet seat is usually the result of loosened nuts and bolts that attach the toilet seat to the toilet bowl. This issue, however, can easily be resolved by tightening the bolts back which were loosened over time. Here’s how to do it.
Why does my toilet seat slide?
A sliding toilet seat is the result of loosened bolts that hold the toilet seat and bowl firmly together. The issue can be fixed by tightening those bolts. If the problem reoccurs after some time, that is because the holes that the bolts go into, are intentionally oversized so they don’t crack the porcelain. The solution to this is to Pack the bolt holes with special washers. This can keep them secure.
Why do toilet seats have two bolts?
These bolts are covered under plastic housing, in order to protect them from exposure and corrosion. Pry up the plastic housing using your fingers or a screwdriver to uncover the bolt.
How to take off toilet seat after removing nuts and bolts?
After removing the nuts and bolts, the toilet seat would be detached from the bowl and you can easily take off the seat by pulling it upwards .
How to open hinge cover?
Pry open the hinge cover with the appropriate tool, applying gentle pressure in order to avoid damage.
How to replace a toilet seat?
Toilet seats are held in place by large plastic or metal screws, before you can replace the seat, remove the snap caps that enclose these screws. 1. Put on the rubber gloves. Wipe all surfaces of the toilet with a disinfectant cleaner ...
Why close the lid on a toilet?
Close the toilet lid so you have better access to the snap caps, which are directly behind the toilet seat.
How to clean a screwdriver?
Wipe your screwdriver with disinfectant spray and dry completely before returning to a tool box or area where you store your tools.
Do you over tighten toilet seat screws?
Do not over tighten the screws when you install a new seat or reattach the old one because you risk damaging the plastic screws or damaging the toilet if you're dealing with metal screws. Jennifer Pinto has been an editor and reporter since 1999, working with newspapers in the Midwest and on the East Coast.
Can you replace toilet seats in a new home?
When you purchase a new home, certain fixtures remain when the former occupant vacates the premises. Such fixtures include an oven, cabinets and toilets. When the home was previously occupied, you may want to install new toilet seats for sanitary reasons. Swapping out used seats with new ones can be accomplished in less than 10 minutes and only requires a screwdriver. Toilet seats are held in place by large plastic or metal screws, before you can replace the seat, remove the snap caps that enclose these screws.
How to unlock a toilet seat?
1. Ensure the hinge caps are in place on the toilet seat. Twist the caps to the left. Grasp them under the two "wings" on either side of the cap and turn the back of the cap toward the left to "unlock" them.
Why do toilet seat hinges twist off?
The hinge caps twist off, allowing you to remove the seat for quick and easy cleaning, without having to unbolt it from the toilet base. Proper installation of the twist hinges is essential to ensuring that the caps twist away properly, without damage to the hinges.
Why does my toilet seat wiggle?
From the pressure of people sitting to the constant opening and closing of the lid and/or seat, your toilets probably get more traffic than any other seat in the house. So it’s understandable that the seat could loosen and wiggle a bit from side to side. The bolts that attach the seat to the commode, located just behind where you sit, are causing the problem. This is no mere annoyance but a potentially unsafe situation, should the lid separate from one of its bolts while someone’s using it, causing injury. Fortunately, the fix is bound to be an easy DIY job —whether you simply need to adjust the bolts or replace them entirely. Read on for two ways to go about how to tighten a toilet seat.
How to remove a severed bolt?
After sawing through the bolt, the severed piece may be hot to the touch, so use caution when removing it. Repeat the process on the other bolt, then clear away any debris on both sides. Remove each nut by spinning it counterclockwise, then pull the bolts out and discard them.
How to tighten a bolt that is not tightening?
If bolts fail to tighten, try holding the nut at the base of the bolt in place with a pair of pliers in one hand while turning the bolt clockwise with the screwdriver in the other hand. Once again, take care not to go too far and damage the bolt or strip it; once it stops turning, you’re done.
How to cut off a bolt that won't budge?
If the bolts are frozen in place and just won’t budge, cut them off with a miniature hacksaw. Place the saw blade just beneath the bolt’s head and saw slowly until you’ve gone all the way through the metal.
How to remove toilet seat?
It’s a good thing most toilet seats can be removed easily by unfastening their connecting nuts and bolts. Should the hardware fastening your seat resist your best efforts, detach the stubborn seat with a socket set, a hacksaw, or a drill. Prevent corrosion and make the next removal easier by maintaining the seat through regular cleaning and by replacing worn out parts.
How to fix a crack in a toilet seat?
Fill small cracks in wooden toilet seats with white or clear silicone to prevent buildup of bacteria. For large cracks, remove the seat and fit a new toilet seat in its place. Avoid using bleach to clean wooden toilet seats, as it can damage the wood as well as the metal hinges and bolts.
How to hold a nut in place?
Grip the nut fastening the bolt firmly. You should find a nut screwed onto the threaded end of each bolt. Some nuts may have a shape similar to a wingnut, allowing you to hold it in place by hand. If you have a weak grip, the nut is not wingnut-shaped, or the nut is stuck, try gripping it with a pair of pliers or vice grips.
How to tighten a toilet bolt?
Rubber bushings can be bought at your local hardware store or home center. Slide the circular, rubber bushings up the threading side of the bolt with the tapered side of the bushing facing up at the toilet. Then tighten the nut with the tightening tool that came with the bushings.
How to break a toilet nut?
Some toilet designs may require a deep socket or socket extension for you to reach the nut. Turn the socket counterclockwise firm ly to break the nut loose. Apply steady moderate force with your socket wrench. If the nut doesn’t loosen, intensify the force on your wrench to high for a very short interval.
How to protect a toilet seat from scratches?
Take a broad knife, like a putty knife, and position it so it covers the porcelain of the toilet around the head of a bolt. This will protect against accidental scratches when you saw. Cut away at the hardware fastening the seat to your toilet a little bit at a time with the hacksaw. This process may take a while.
Why are the nuts on my toilet seat not sliding?
If the toilet seat isn't sliding around, the nuts are tight enough. You don't actually want to overtighten those nuts, since you may end up cracking the porcelain . If that happens, you're going to need to buy a new toilet!
