The first thing you should know is that the Beehive plunger does not go in up and down! You have to angle it towards the toilet. the reason for that is that you want to collect water into the head of the plunger. After you give it a few pumps, you will tilt it upright and plunge for about 20 seconds pulsing it up and down. After you’re done plunging and your toilet is unclogged you might want to clean it and put it away properly.
What is a beehive plunger for toilets?
The flange allows the plunger to fit inside the toilet’s drain and form a tight seal, increasing its suction. If you have a newer, high-efficiency toilet with an oblong-shaped drain, a beehive plunger is the best option.
Can you use a standard plunger to plunge a toilet?
Toilet bowl drains have changed from round to oblong shaped outlets and standard plungers on the market cannot achieve a seal to effectively plunge. The best toilet plunger's t-handle and flexible, beehive shape head design, allow for an optimum grip and effective plunge in any toilet.
Does the Kohler beehive Max plunger fit a Mansfield toilet?
Recommended by Kohler, the BEEHIVE Max Plunger fits Kohler, TOTO, American Standard, Mansfield and all other brands. As seen in This Old House - Top 100 Best New Home Products of 2014. The 99-4 toilet parts include: (1) T-Handle and (1) Plunger Head.
What is a plunger and how does it work?
There are many styles and types, but the most basic plungers can be described as a short or long stick (a handle made of wood or plastic) with a rubber cup attached to the bottom. The rubber cup is placed over a drain to create a tight seal. The user then “plunges” the drain by moving the handle up and down.
Is the Beehive plunger good?
This beehive shaped toilet plunger seals very well against a toilet bowl opening and is a lot more effective and efficient at unclogging toilets than an old style red rubber cup shaped toilet plunger that I had previously used for many years.
How do you correctly use a plunger?
Submerge the plunger (the top of the bell should be covered with water) and make sure the rubber ring is inserted directly into the drain opening. Push and pull on the handle with quick, concentrated thrusts for 20 seconds without lifting the plunger out of the drain and breaking the seal.
How do you use a classic plunger?
0:221:31How to Fix a Toilet - Unclogging a Toilet - Plunger - YouTubeYouTubeStart of suggested clipEnd of suggested clipMaking a closed seal which is important to maximize water pressure rapidly depress the plungerMoreMaking a closed seal which is important to maximize water pressure rapidly depress the plunger around 12 times forcing. Water against the blockage unless.
How do you use a flange plunger?
Insert the flange fully into the drain hole. Push down sharply on the handle in a vertical motion to fully depress the plunger cup. Pull the plunger handle back up sharply. Repeat this action several times, then flush the toilet.
Why does my plunger not work?
Get a good seal on the toilet drain (that is, make sure you're covering the entire drain or you won't have enough pressure to loosen the clog.) Cover the plunger in water. You need water, not air, pressure to loosen the clog. If your toilet lacks water, pour in enough water till the plunger is covered.
How do you tell if a plunger is working?
Plunge Correctly Give a few good up and down strokes with the plunger and flush the toilet. If the water clears from the toilet, then you've successfully unclogged it. If the toilet starts overflowing again, just close the flapper to stop water from entering the bowl.
How long does it take for a plunger to work?
around 20 secondsHow long does it take for a plunger to work? After around 20 seconds, the plunger will most likely have broken up enough of whatever is clogging the drain/toilet for the water to drain. Repeat as necessary, though. If nothing is working, experts recommend that you may have to use a drain snake.
Does a plunger push or pull?
Plunging a drain uses the forces of hydraulic suction and compression. When you pull up on a plunger, it pulls water in the drain upward, beginning the process of loosening the clog. When you push down on the plunger, water is forced downward, moving the clog in the other direction.
What is the purpose of a plunger?
Plungers are basic household tools that are designed to deal with drain clogs of all sorts. Since drain clogs are common plumbing problems, drain plungers offer an extremely effective, inexpensive, and easy way to unclog drains. A plunger works its magic by simple suction and pressure.
What is a beehive plunger?
Proudly designed and made in the United States, the BEEHIVE Max Toilet Plunger is the first plunger designed to fit both old and new high efficiency toilets (HET). Toilet bowl drains have changed from round to oblong shaped outlets and standard plungers on the market cannot achieve a seal to effectively plunge.
Whats the difference between a cup plunger and a flange plunger?
Flange plungers look very similar to cup plungers. The difference is that a flange plunger has a longer handle and a soft, smaller cup (known as a flange) that extends down the bottom end of the plunger.
What is a flange plunger?
Flange plungers are used to clear toilet clogs. These plungers have a rubber cup with a sleeve-like extension, which is the flange. To use the plunger, put the flange into the toilet bowl and get as much water as possible into the flange and the cup.
How do you unblock a badly clogged toilet?
How Do You Unblock a Badly Clogged Toilet?Ways to Unclog Your Toilet.Lubricate the Blockage With Dish Soap.Make a Coat Hanger Snake.Break Up the Clog With Hot Water or Drain Cleaner.Mix Your Own Declogger.Plunge Using a Plastic Bottle.Unblock Your Toilet With Vinegar and Baking Soda.More items...•
Can plunging damage pipes?
Forceful plunging can damage the drain line and cause leaks. Along with clogs that require extra force, avoid plunging obvious major obstructions.
How do you unblock a shower drain with a plunger?
Fill the shower basin or tub with enough water to cover the plunger's lipped rim. Rapidly push the plunger up and down for a few minutes to create suction and push the clog through the drain. Flush the drain with hot water.
Is there a difference between a sink plunger and toilet plunger?
Toilet plungers have a similar cup to the sink plunger. However, a toilet plunger also has a soft rubber flap called a flange that folds out from inside the cup. This flange fits well over the toilet drain, making it easy to form the necessary suction to clear a clog.
How Does a Plunger Work?
A plunger is a tool that is used to unclog drains. You can find one in nearly every bathroom across America because it is so incredibly useful. It was invented by John Hawley in 1874.
What is the handle on a plunger?
The handle, or shaft, is the piece that you hold and control your plunger. It is usually made of wood or plastic, but sometimes metal. For most people, wood handles seem to be the best for strength and comfort. It should be held vertically (straight, in line, with the drain opening) when plunging with an up and down.
How many times should you push a plunger down?
Then begin quickly and forcefully pushing your plunger down and then up. This down/up, down/up, down/up motion should be repeated up to 10-20 times, or up to 20 seconds.
How big is a plunger cup?
Like the length of handles, there are different sizes of plunger cups. The most common are approximately 4.75 inches, 4 inches, and 3 inches. Again, there’s no right or wrong so choose the size plunger with a cup that seems suitable for most of your jobs.
How long to swirl a plunger?
Place plunger in bowl and swirl it around for at least 1 minute (2 minutes preferred)
Where to place plunger cup?
Place the flat cup of your plunger directly over the drain.
What to wear when plunging?
Always wear rubber cleaning gloves (and even safety glasses if you have them) when plunging; you don’t want to get any bacteria on your hands or face.
Beehive Plunger Specifications
Model: The model number of the Korky Beehive Plunger is Part number 99-4A. Equiparts Part number 66629.
The Evolution of Toilet Bowl Shapes: Out with the Round, In with the Keyhole
Not all toilets are created equal. New toilet bowls have drains that are a different shape than older toilet bowl drains. Older toilet bowls have a classic round shape, whereas new high efficiency toilets have a new keyhole shape. Old style round plungers do not properly fit the new drain shape.
Order the Beehive Korky Plunger today
Equiparts Part #66629 Submit a quote online or call to place your order.
How wide can a bee plunger seal?
The best beehive plungers can seal pipes up to six inches across. Some also come with t-shaped handles for added leverage while fighting blockages.
What is a bellows plunger?
Bellows plungers can be bought for toilets or sinks. Instead of a solid tip, they have a corrugated bowl that compresses like an accordion. The collapse makes the plunge more powerful, and in theory, flushes out blockages more quickly. In practice, it’s not always easy to direct all that power.
What is a touchless plunger?
A touchless plunger is a giant bellows that you insert between your toilet seat and bowl, then pump by moving the seat up and down.
Can a cup plunger be used as a toilet plunger?
Cup plungers are often used as toilet plungers, but this isn’t their intended purpose. They don’t seal toilet drains very well, and often get stuck inside-out and fling dirty water back on their users.
Can a power plunger fling toilet water in your face?
It’s definitely a novel way to replicate the back-and-forth action of a traditional plunger, but we’re not seeing anything here that entices us to switch over — especially since there’s a risk that the power plunger will just fling toilet water in your face instead of moving the blockage.
Step 1: Get the right type of plunger
The key to resolving most clogged toilets efficiently is to have the right kind of toilet plunger. When most people think of a plunger, they envision the standard plunger, where the rubber cup part resembles a dome.
Step 3: Plunge the toilet
Lower the plunger into the toilet bowl, making sure to form a tight seal between the plunger and the drain, or the plunger won’t work properly. The extension should be positioned in the drain hole, while the lip of the cup sits around the opening. The handle should be pointing straight out of the bowl, instead of at an angle.
Step 4: Reassess the situation
After plunging for at least a minute, try flushing the toilet. If you’ve succeeded in dislodging the clog, your toilet will flush normally. If not, repeat Step 3. If you’re still unsuccessful after several attempts, try using a toilet auger.
Step 5: Clean the plunger
It’s necessary to thoroughly clean the plunger after use; as you can imagine, it’ll be covered in bacteria. Pour two cups of liquid bleach into the cleared toilet bowl, insert the plunger, and swirl it around for about a minute.
