how do you use a bissell powerforce helix

How do you use the hose on a Bissell PowerForce Helix?

• Turn off your Bissell vacuum or cleaning machine.
• Remove the attachment you want to use from the Bissell Tool Caddy on the back of the Bissell vacuum or cleaning machine.
• Push the attachment into the end of the flex hose.
• Place the "Ready Tools Dial" on the front of your Bissell unit to the "Hose Attachments" setting.

Full Answer

How do I use the powerforce™ helix accessory tools?

Your new PowerForce™ Helix vacuum not only does a great job on your floors, it also comes with a complete set of accessory tools to make your above floor cleaning jobs easier. Just put your vacuum in the upright position, pick the accessory tool that best fits your needs and attach it to the end of your hose.

How to use Bissell vacuum cleaner?

Just put your vacuum in the upright position, pick the accessory tool that best fits your needs and attach it to the end of your hose. You’re ready to clean base boards, curtains, upholstery and much more. For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field.

What kind of vacuum is powerforce helix?

Powerforce ® Helix ™ Bagless Upright Vacuum has a large-capacity dirt tank holds more dirt for more room-to-room cleaning. On-board tools for cleaning above floors and edge-to-edge floor cleaning for hard-to-reach areas like baseboards and around furniture. Click here to download video transcript.

Where can I find a Bissell authorized service center?

Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.

How do you use the attachments on a Bissell vacuum?

How to Use Bissell AttachmentsTurn off your Bissell vacuum or cleaning machine. ... Remove the attachment you want to use from the Bissell Tool Caddy on the back of the Bissell vacuum or cleaning machine.Push the attachment into the end of the flex hose.More items...

How do I start a Bissell PowerForce?

Press the red power switch with your foot to turn on your vacuum. Press it again to turn off once you've finished cleaning. Press the recline pedal to lean your vacuum back for cleaning convenience. To get even lower, press the recline pedal a second time.

Why is my Bissell PowerForce Helix vacuum brush not spinning?

0:472:11What to do if the Brush Roll Won't Rotate on your BISSELL® Pet Hair ...YouTubeStart of suggested clipEnd of suggested clipCover. Pull the roller straight out and slide the belt off the motor gear. Inspect the brushroll byMoreCover. Pull the roller straight out and slide the belt off the motor gear. Inspect the brushroll by putting it on its end and spinning it it should spin freely.

How do I turn on my Bissell PowerForce Helix Turbo?

Press the red power switch with your foot to turn ON your vacuum. Press it again to turn your vacuum OFF when you've finished cleaning.

How do you use a Bissell PowerForce bagged vacuum?

0:041:32BISSELL PowerForce® Bagged Operation - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn the bottom of your machine there is a power switch and reclined pedal press the power switch toMoreOn the bottom of your machine there is a power switch and reclined pedal press the power switch to start the vacuum then press the recline pedal to lower the vacuum back for cleaning.

How do you turn on the hose on a vacuum?

0:441:48How to Use a Central Vacuum - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis most hoses that are designed to be used with an electric power head have a 3-way switch theMoreThis most hoses that are designed to be used with an electric power head have a 3-way switch the center position is off the first position turns on just the vacuum.

Why won't the brushes spin on my Bissell carpet cleaner?

0:041:26Brush Roll Not Turning | BISSELL® JetScrub™ Pet Carpet CleanerYouTubeStart of suggested clipEnd of suggested clipCheck for hair wrap around both ends of the brush roll. Test the brushroll by holding the tab andMoreCheck for hair wrap around both ends of the brush roll. Test the brushroll by holding the tab and spinning it if it doesn't spin you need to order a replacement.

Why is my Bissell roller not rolling?

You may have stalled the brush motor. To reset, turn off and unplug, then plug back in and turn on. The brush roll may have lodged debris or other entanglements keeping the brush from rotating. To fix, you'll need to remove the brush roll to inspect.

How do I make my vacuum spin?

Common solutions for: Vacuum cleaner brush not spinningBelt. Inspect the belt to see if it is broken, stretched out, or out of place. ... Cogged Belt. Inspect the belt to see if it is broken, stretched out, or out of place. ... Drive Belt. ... Brushroll. ... Brushroll Motor.

How do you use a vacuum hose?

Just put some pantyhose over the nozzle and secure with a rubber band. Place the wand over the article you can't reach and the vacuum will suction it to the hose making it easy for you to grab.

How does Turbo brush work?

0:161:21How To Use The Turbo Brush - Sirena Total Home Cleaning SystemYouTubeStart of suggested clipEnd of suggested clipIt's a miniature power head designed for smaller areas. Such as furnishing stairs cars that sort ofMoreIt's a miniature power head designed for smaller areas. Such as furnishing stairs cars that sort of idea it's an air driven tool it's not electrical.

How do you use the Bissell turbo brush tool?

0:041:39How to Use Your BISSELL® Pet Hair Eraser® Turbo Vacuum - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide the setting down for a high pile or plush carpet. And up for bare floors. If you're havingMoreSlide the setting down for a high pile or plush carpet. And up for bare floors. If you're having difficulty pushing move the setting closer to high pile or plush carpet. Until it gets easier to push.

How to replace a brush roll on a motor?

Replace the brush roll and belt by looping the belt over the motor shaft and brush roll. Line up the end caps and pull the brush roll. This will stretch the belt. Once the brush roll is reinstalled, place the bottom cover back on and replace the screws.

How to clean a pre motor filter?

To clean the pre motor filter, open the dirt container lid by lifting the release latch on the front. Remove the pre motor filter and pull the filter out to clean. Once it's clean and dry, place it back in the dirt container lid. To access your post motor filter the dirt container must be removed.

How to clean a vacuum separator?

To clean your separator, the dirt container must be removed. Remove the separator by twisting to the left and removing. Rinse and dry all sections of the dirt container with paper towel. To replace the brush and belt, turn the vacuum off and unplug.