Press the on/off button to start the rotating mousepad. Each time you recline your spin wave youMorePress the on/off button to start the rotating mousepad. Each time you recline your spin wave you will need to press the on button for the pass to rotate. You may feel a slight vibration.
WARNING: To reduce the risk of electric shock, turn power switch o and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
How to remove mop pads from a washing machine?
To remove mop pads, simply pull pads off the hook and loop material on the bottom of the machine.
Can you use a Bissell Spinwave on carpet?
ATTENTION: This machine is designed to be used only on sealed hard floors and should not be used on carpet or rugs. For best cleaning results, sweep or vacuum the floor surface prior to using the BISSELL SpinWave™. This is to avoid scratching or damaging floors from sharp debris.
21 hours ago
· This video shows you how to use the BISSELL SpinWave Hard Floor Cleaner. Safe for cleaning sealed, hard-surface floors like tile, linoleum, vinyl flooring, a...
2.How to use the SpinWave™ Hard Floor Cleaner | BISSELL
Url:https://www.youtube.com/watch?v=97IqIpPYicc
12 hours ago
· This video (version 2) shows you how to use the BISSELL® SpinWave™ Hard Floor Cleaner. Safe for cleaning sealed, hard-surface floors like tile, linoleum, vi...
3.How to use the SpinWave™ Hard Floor Cleaner (version …
Url:https://www.youtube.com/watch?v=BUs9R6Ww24M
19 hours ago
Fill water tank with water to the water fill line. Pour BISSELL formula into water tank to the formula line. Put cap back onto water tank by twisting until lined up with the lock. Insert water …
35 hours ago
· Then add BISSELL® SpinWave™ formula to the first formula fill line. Screw the cap back onto the clean water tank. Slide the clean water tank back into place until you hear a click. …
6.How to use Wet Mopping Mode SpinWave® Wet and Dry …
Url:https://www.youtube.com/watch?v=OEnxwuJpO5w
35 hours ago
· Spot Mode. 1. Place the robot in the center of the area you want to clean. 2. To start cleaning, press the Start/Pause button 3 times or select “Spot” mode in the BISSELL Connect …
33 hours ago
· Showing how to clean a floor with a powered mop. Easy setup. Easy opeeation. Practically noise free. Does the job without the strain and effort of a traditi...
24 hours ago
You can also mix other natural cleaners with bleach in this machine. So, you can put in your Bissell Spinwave. Vinegar: You can also use vinegar in your Bissell Spinwave. Vinegar is not a …
