How to Use Chainsaw Depth Gauges
- Step 1 - Check the Lubrication It is important to check the lubrication on your chainsaw every time you sharpen it. ...
- Step 2 - Slide the Depth Gauge As a starting point, slide the depth gauge carefully over your saw.
- Step 3 - Sharpen the Saw ...
- Step 4 - Adjust the Gauge ...
- Step 5 - Take Careful Measurements ...
- Step 6 - Equalize the Settings ...
How to check if chainsaw is working?
How to sharpen a chainsaw?
How many times do you adjust a chain saw?
Where is the lubrication on a chainsaw?
See 1 more
About this website
How do you use a depth gauge?
2:1012:58CHAINSAW SHARPENING - FILING DEPTH GAUGES EP.09 - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo all you need to do to lower your depth gauges is you just put your file on top of the depth gaugeMoreSo all you need to do to lower your depth gauges is you just put your file on top of the depth gauge. Try to go for a ninety degree angle you want to avoid touching your teeth.
How high should the rakers be on a chainsaw?
The raker should be about 0.50. 8 mm lower than the cutter. You sharpen the cutters first.
How do you set the rakers on a chainsaw?
0:381:57How To Sharpen A Chainsaw Chain - Raker Height Filing Very Important!YouTubeStart of suggested clipEnd of suggested clipAll. You need to do is set the gauge on the chain. With a little raker nub sticking up in a slot inMoreAll. You need to do is set the gauge on the chain. With a little raker nub sticking up in a slot in the middle of the depth. Gauge. Whatever is protruding you want to file down even with the gauge.
Does chain gauge matter on a chainsaw?
The gauge measurement of a saw chain tells a pro user about the strength of a chain's drive links. Thicker drive links are usually stronger, but they are heavier. Weight affects performance, and to maximize cutting speed, weight should be kept to a minimum.
How do I check my Raker depth?
1:234:08filing rakers on chain saw chain - raker gauge/depth gauge - YouTubeYouTubeStart of suggested clipEnd of suggested clipDid you set your flat file right on top. And file until it's even till it's even with that. If it'sMoreDid you set your flat file right on top. And file until it's even till it's even with that. If it's sticking up above.
How do you check rakers on a chainsaw?
3:047:34CHAIN SAW SHARPENING TIPS, FILING RAKERS - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne. You see what I'm saying friends just turn your fob. It stops the chatter. Because if you'reMoreOne. You see what I'm saying friends just turn your fob. It stops the chatter. Because if you're going across the bar rails.
What is a raker on a chain saw chain?
Rakers control the thickness of the chips cut by the chainsaw teeth. Rakers, which are also known as depth gauges, need to be adjusted regularly to ensure safe chainsaw use. Rakers should be adjusted after every second or third sharpening of the chainsaw teeth.
Where are the rakers on a chainsaw chain?
Rakers. Ah, those little guys on the front of the saw chain tooth. With only a little swipe of the file, I can make this chain saw really cut! Some call them Rakers, some call them Drags, others, like I do, refer to them as Depth Gauges.
How big of a tree can a 12 inch chainsaw cut?
An important factor to take into account is the diameter of the wood you will most often be cutting. The usual guideline is to choose a chainsaw with a bar that is two inches longer than the diameter of what you need to cut. For example, if you need to cut a tree that is 10” across, you will need a chainsaw of 12”.
What does the number on the bottom of a chainsaw chain mean?
To find a chain replacement, you'll need to figure out two numbers: Pitch: the distance between the chain's drive links. Gauge: the width of the groove where the chain fits into the bar.
What does 72 mean on a chainsaw chain?
63. .063” The final set of numbers show how many drive links are in the chainsaw chain that will run on that specific bar. This bar has “72” stamped, so it would need a 72 drive link chain. Drive link count can range anywhere from 28 to 210 depending on your bar size.
What do the rakers do on a chainsaw?
What do chainsaw rakers do? Chainsaw rakers control how deep the chainsaw tooth cutter penetrates the wood. Essentially what they do is prevent the edge of the tooth from biting too much into the wood. Rakers help determine the height that the teeth cutters will cut into the wood.
What is a raker on a chain saw chain?
Rakers control the thickness of the chips cut by the chainsaw teeth. Rakers, which are also known as depth gauges, need to be adjusted regularly to ensure safe chainsaw use. Rakers should be adjusted after every second or third sharpening of the chainsaw teeth.
Which raker depth gauge do you recommend? - Arborist, Chainsaw & Tree ...
Hello, Running a .325 chain on an ms261, had always used a stihl 2-in-1 that handled the rakers but recently switched to a timberline which seems to do a much better job. Unfortunately it doesn't handle the rakers. I see that oregon sells depth gauges but they have different versions, not sure...
How to Use the Stihl Depth Gauge Tool | eHow
A chainsaw has a metal point positioned in front of individual teeth on the chain. Each point, known as a depth gauge, determines the amount of “bite” an individual cutting tooth removes as it passes around a section of wood. Depth gauges need adjusting whenever you sharpen your chainsaw.
How to Use a Chainsaw Depth Gauge | eHow
Chainsaw blades need sharpening to keep them in good working order. A dull chainsaw blade will cut slowly, bind in wood and can cause dangerous kickbacks to the operator. Dull chains will pull off the bar while in use and can strike the operator causing severe injuries.
How to check if chainsaw is working?
Using a chainsaw checking tool, remeasure the distance between the top plate and the topmost part of the depth gauge. As you proceed through checking the distance, also check the pitch of the chains on your saw and re-measure the tool length. Finally, at the same time check the drive length and last, re-check the depth gauge. Making these tiny checks, will help to insure sure your chainsaw is working correctly. You may avoid unnecessary accidents by properly performing regular maintenance on your chainsaw.
How to sharpen a chainsaw?
You can sharpen the saw in one of two ways. First, utilize a flat file and file down any protruding angles or pieces over the depth gauge tool. Second, using a grinding wheel, grind the depth gauge to a point where you are satisfied with the level.
How many times do you adjust a chain saw?
Adjustments must occur after you have sharpened the saw two to three times in succession. Adjustments are necessary as you will ensure further accuracy of your equipment. In the adjustment, the distance between the top plate and the top of the depth gauge are measured and accurately set. A great adjusted chain saw insures good cutting results.
Where is the lubrication on a chainsaw?
It is important to check the lubrication on your chainsaw every time you sharpen it. There is a chain sprocket located on the front of the bar. Use a small grease applicator to apply a small amount of grease to the fitting on the front of the sprocket.
How to use a chainsaw depth gauge?
Place a chainsaw depth gauge over two teeth of the saw blade. Two teeth will protrude through the slot in the depth gauge. One tooth will be on each side of the chain .
Why tighten chainsaw bar?
Tightening a chain on a chain saw bar makes it easier to file and sharpen the teeth by making the chain have less play and movement.
Why sharpen chainsaw blades?
Chainsaw blades need sharpening to keep them in good working order. A dull chainsaw blade will cut slowly, bind in wood and can cause dangerous kickbacks to the operator . Dull chains will pull off the bar while in use and can strike the operator causing severe injuries. A chainsaw depth gauge provides a flat surface across the top of the chainsaw teeth. After sharpening the teeth, the gauge is a guideline to file the guide teeth down so they are all the same height and operate smoothly.
How many strokes to level a chain?
Slide the flat file over the exposed teeth until the chain is level with the gauge. This is usually only two to three strokes.
How does the depth gauge affect the cutting efficiency of a chainsaw?
During a chainsaw operation, the material removal rate is the mathematical product of the chain speed, the speed with which it is fed , and the depth of cut. Hence, to achieve the maximum material removal rate, you need to maximize the depth of cut of your chainsaw. Mathematically,
Why sharpen depth gauges on chainsaw?
Sharpening the depth gauges ensures that the chainsaw cuts enough wood per unit of time and saves you several precious hours of your time. Typically, depth gauge adjustments become more imminent after the chain has been sharpened.
Why Does a Depth Gauge Need Maintenance?
In most cases, the sharp cutting edge of the cutter tooth gets lowered, ultimately reducing the depth gauge’s rake. The downside is that the material removal rate is significantly decreased since the depth of the cut is reduced. Due to this, your chainsaw will cut thinner chips of wood. There might come a time when it doesn’t cut anything due to the cutting edge and the depth gauge being at the same level.
What is a depth gauge?
As the name suggests, a depth gauge is a part of the cutter tooth that controls the depth of the cut. It is a pointed tip located along with the cutter tooth after the cutting blade. A small amount of vertical distance is present between the tip of the cutting blade and the depth gauge. This distance is also known as depth or rake and is often stamped on the depth gauge.
How to level a depth gauge?
Take the flat file and feed it across the depth gauge above the slot to level the depth gauge. Keep filing the gauge until it has been leveled with the guide tool. While doing so, make sure you maintain the original shape of the depth gauge. Otherwise, the cutters will feed roughly to the wood while cutting. Also, avoid filing the gauge lower than the guide setting.
How to tell if chainsaw chain needs sharpening?
The best way to know if your chain needs sharpening is to check the wood shavings produced during sawing. If the shavings comprise fine, dust-like particles, then you should consider sharpening your chain. On the other hand, if you see larger, thicker chips instead, then your cutter teeth are sharp, and there’s no need to sharpening yet.
What is the sharpening angle of a chainsaw?
The sharpening angle is the angle at which you keep the round file on the top surface of the cutter teeth while sharpening. This angle varies for different chain types and is usually engraved on the cutter teeth. For crosscutting chains (against the grain direction), this angle typically varies from 25-30 degrees. For chains that cut along the grain direction, the sharpening angle is usually 10 degrees.
What is a depth gauge on a chainsaw?
Each point, known as a depth gauge, determines the amount of "bite" an individual cutting tooth removes as it passes around a section of wood.
How to position a chainsaw?
Position the chainsaw on a sturdy work surface with an adequate source of light. Orient the saw so that the tip of the chainsaw bar points toward your left or right.
Do chainsaws need sharpening?
Chainsaw cutters need sharpening after each use.
What is the proper depth gauge for chainsaw?
The gauge plays a vital role when setting up your files. It is a tool that determines the proper depth gauge, a chainsaw part that measures how deep your chain can cut. The general rule of thumb is to go for gauges that measure at least 0.050 or above for a longer life span.
Where to find gauges on chainsaw?
The gauge measurements and readings are found on the chainsaw’s bar guide. These labels are a big help because they provide accurate and precise gauge measurements. Thanks to the markings, you won’t have to guess or estimate the gauge’s size when applying the files.
How Can You Determine the File Size of Your Chainsaw Chain?
When looking for topnotch chainsaw files, the chainsaw file size chart is your best friend. Always refer to the values on the table so that you know which files to buy. For example, if you have a chain with an ID number of 95, a 4.8 mm round file would be the most compatible option.
What Is a Chainsaw Chain?
Now that we have gone over the file size chart, let’s discuss the chainsaw chain in terms of its construction and overall appearance. [1]
What Are the Different Types of Chainsaw Gauges and Files?
As we will see on the graph, the primary file options are 4.0 mm, 4.8 mm, and 5.5 mm. It comes in either a round file or flat file depending on the type of cutter you are planning to sharpen. More on the cutters later on.
What do you need to know when choosing a chainsaw file?
When choosing a chainsaw file, you need to understand the different types of cutter teeth your chain uses. That is because you want your chosen files to be compatible with the cutter teeth, meaning they are neither too big nor too small. Let’s go over them one by one.
What is the sharpest chisel cutter?
Chisel (Square Grind and Square Tooth ) The full chisel cutter is the sharpest, so you need to make sure you seek help from professional sawyers to avoid injuries. You will need a square file that fits the cutting edges and the chain’s square shape for filing purposes.
How to check if chainsaw is working?
Using a chainsaw checking tool, remeasure the distance between the top plate and the topmost part of the depth gauge. As you proceed through checking the distance, also check the pitch of the chains on your saw and re-measure the tool length. Finally, at the same time check the drive length and last, re-check the depth gauge. Making these tiny checks, will help to insure sure your chainsaw is working correctly. You may avoid unnecessary accidents by properly performing regular maintenance on your chainsaw.
How to sharpen a chainsaw?
You can sharpen the saw in one of two ways. First, utilize a flat file and file down any protruding angles or pieces over the depth gauge tool. Second, using a grinding wheel, grind the depth gauge to a point where you are satisfied with the level.
How many times do you adjust a chain saw?
Adjustments must occur after you have sharpened the saw two to three times in succession. Adjustments are necessary as you will ensure further accuracy of your equipment. In the adjustment, the distance between the top plate and the top of the depth gauge are measured and accurately set. A great adjusted chain saw insures good cutting results.
Where is the lubrication on a chainsaw?
It is important to check the lubrication on your chainsaw every time you sharpen it. There is a chain sprocket located on the front of the bar. Use a small grease applicator to apply a small amount of grease to the fitting on the front of the sprocket.
