You attach it to a strong compressor (really need about 120# of pressure for this tool to create the proper vacuum level), place it in your overflow reservoir and create a vacuum on the cooling system. You then turn on the intake valve and refill your entire cooling system in minutes from a bucket of pre-mix with absolutely no air in the system.
What is a snap on Coolant Exchange?
The Snap-on Coolant Exchange™ unit,part number EESE336A, is a device thatremoves and refills engine coolant and alsopressure tests the cooling system. Coolantis extracted and refilled through the upperradiatorhose connection without the vehicleengine running.
What should I do when servicing the coolant system?
❐When servicing coolant systems, the coolant inthe overflow bottle should also be removedand the bottle flushed with clean water. Usethe suction wand to remove the coolant.
How do you drain the coolant from a car engine?
But before you do anything, check your owner’s manual for the recommended procedures and coolant for your car. Open the drain cock by unscrewing, twisting a quarter turn, or twisting and pulling. (The various styles are shown in the next photo.)
How do you fill a coolant tank with compressed air?
Insert the air tool (we used the UVIEW 550500 AirLift II Economy Cooling System Refiller; available through our affiliation with amazon.com) into the radiator neck or overflow bottle. Connect the exhaust hose and compressed air line and route the open end of the tool’s exhaust hose into an empty gallon jug or pail.
How do you set up a coolant flush machine?
1:122:48The Best Coolant Flush Machine In The World - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst turn the center control silver valve to old coolant tank one second turn the main green valveMoreFirst turn the center control silver valve to old coolant tank one second turn the main green valve on to open position now you can see the needle on the compound gauge is going down to vacuum.
How often should you do a coolant exchange?
30,000 milesHOW OFTEN SHOULD YOU FLUSH THE COOLANT? Depending on the vehicle and the coolant, the average time between flushes is two years or 30,000 miles for silicated coolants and up to five years or 100,000 miles for an extended drain coolant. You can tell which type of coolant you have by the color.
How do you use a BG coolant flush machine?
1:567:21BG CT2 Coolant Transfusion Machine Training Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart the engine. And allow to run for 15 to 20 minutes to circulate the flush. Turn off the engine.MoreStart the engine. And allow to run for 15 to 20 minutes to circulate the flush. Turn off the engine. And close the ball valve on the CT 700 connect the pump hose to the engine.
What is a coolant system Exchange?
Service includes draining the system of old, tired, dirty coolant, and refilling it with the correct, new coolant for your car or truck. Also called "radiator fluid exchange" or "coolant flush".
Does the car need to be running when adding coolant?
Make sure your engine is off and cool, the vehicle is in Park or Neutral, and the parking brake is set. Open the hood and locate the engine coolant reservoir. It is often a translucent white color, and has hose(s) connecting it to the radiator.
What happens if you add water to 50/50 coolant?
While you can drive the car for a short time using water in place of the coolant, it won't effectively protect your engine. This means its essential to get the problem that caused a low coolant level fixed as soon as possible, and the radiator filled with a 50/50 ratio of coolant to water.
What is a BG coolant flush?
BG Cooling System Service Flush out all debris from the cooling system. Remove the scale, sludge, and corrosion and sludge from the radiator. Clean rust from coolant lines. Replenish additives in the coolant that have been depleted. Replace all of the coolant in the system, not just that in the radiator.
How much does it cost to get a coolant flush?
The price for a radiator flush, in which a certified technician drains all the fluid out of your radiator and replaces it with fresh fluid can average between $131 and $209.
How much does it cost to get your car flushed out?
The average cost to flush coolant from a radiator is anywhere from $100 to $200. The exact cost will usually depend on where you go (an independent mechanic will be cheaper than a dealership). Some less reputable shops might only charge between $50 and $100.
Is a coolant exchange the same as a coolant flush?
the coolant service usually involves draining the old coolant and putting new coolant in. but many auto service shops will recommend a coolant flushing process instead. both of these coolant service procedures replace your old coolant with fresh coolant, but in different ways.
What are the benefits of a coolant exchange?
What are the benefits of a coolant flush?Coolant flushes remove rust and scale deposits, which build up over time. ... The new anti-freeze contains additives that work to lubricate your automobile's water pump, which can help extend the life of your water pump.More items...
Will coolant flush help overheating?
To fully clean your system, it's vital to fully evacuate the old coolant so that the new antifreeze doesn't blend in. Therefore, coolant flush keeps your radiator in optimal working condition and minimizes overheating and high-temperature gauge risk.
How long should engine coolant last?
Antifreeze should be replaced every 3-5 years depending on how often and how far you drive your car, its age, and the temperature of where you usually drive. Extra care needs to be taken in the summer months, especially if it's a hot day, so make sure you check your coolant levels before the start of the summer.
What happens if you don't flush your coolant?
When your radiator coolant hasn't been changed in a long time, it can cause radiator corrosion, generating rust, or debris that you do not want in your car's radiator and engine. To solve this problem, a coolant flush can prevent and clean your cooling system.
How much does a coolant flush cost?
The average cost to flush coolant from a radiator is anywhere from $100 to $200. The exact cost will usually depend on where you go (an independent mechanic will be cheaper than a dealership). Some less reputable shops might only charge between $50 and $100.
How do you know when you need a coolant flush?
Vehicle Overheating and High Temperature Gauge The primary role that coolant plays in your vehicle's functioning is keeping your engine temperatures low. If you find that your temperature gauge is always high and your engine is frequently overheating, chances are that you need a coolant flush.
How to check coolant color?
Start by checking the condition of your coolant when the engine is cool. Remove the radiator or coolant reservoir cap and examine the coolant color. If it looks rusty (don’t confuse orange coolant with rust), has crud or oil floating on the top, or looks like chocolate milk, call it quits and take it to a pro.
How to buy extended life coolant?
Here’s how: Start by buying the type of coolant listed in your owner’s manual. If your manual calls for an “extended life” coolant that isn’t available at the auto parts store, buy it from the dealer. Don’t buy a “universal” coolant. Using the wrong coolant can cause premature component failure and void your warranty.
How to prevent mineral deposits on radiator?
Mix the coolant and water thoroughly in a clean bucket. To prevent mineral deposits on internal engine and radiator surfaces, always use distilled water—never tap water. Leave the car raised while you refill the radiator to reduce the possibility of air pockets forming in the engine.
What happens if you use the wrong coolant?
Using the wrong coolant can cause premature component failure and void your warranty. Raise and safely support the front end of your car on jack stands. Place a large drain pan under the radiator and remove the radiator cap. If your radiator doesn’t have a cap, remove the pressure cap from the coolant tank.
Is coolant toxic to pets?
Pour it into a screw-cap plastic container and drop it off at a recycling center. Sweet-tasting coolant is irresistible to pets—and poisonous. Just a small amount can be deadly. So soak up any spills with paper towels or rags immediately if you have pets wandering around.
Can a radiator cap cause an engine to overheat?
And a worn radiator cap (sometimes it’s on the overflow tank) can also contribute to engine overheating. Both parts are inexpensive (about $12 each at any auto parts store) and are cheap insurance against overheating. A radiator cap is a snap to change (see photo).
Can you skip a coolant flush?
But if you’re on schedule for a coolant change and your coolant is free of brown, gunky corrosion (extract a little coolant with a baster to examine it), you can skip the flush procedure and perform a simple drain and refill operation yourself and save money. Here’s how:
