The fence post repair spike simplifies this by avoiding the concrete. Just push the flat of the repair spike against the post and with a hefty hammer knock it into the ground then simply screw to the fence posts you’re done!
How do you fix a fence post with spikes?
Metal post holders and spikes solve the fence post problem in most ways. The spikes are simply driven into the ground with a sledge hammer but it is really advisable to put adriving block (shown in the image below) into the fence post spike first.
Are spikes on a fence stable?
A fence that uses fence post anchor spikes is just as stable as a fence with posts set in concrete, with the added benefit of minimizing the rotting of the fence posts.
Do fence post anchor spikes work?
Fence post anchor spikes work well by allowing one to place and remove fence posts without having to dig large holes. A fence that uses fence post anchor spikes is just as stable as a fence with posts set in concrete, with the added benefit of minimizing the rotting of the fence posts.
How do you fix an Anchor Fence Post?
Let us help you find a tradesman local to you There are several ways to fix, anchor or support fence posts which include using a metal post holder (or Metpost or post spike as they are also known), digging a hole and using concrete to secure the post, or post ramming which is a bit like pile driving for fencing.
How long is a standard spike?
Do fence post spikes last?
How do you use fence spikes?
1:245:56Install a METPOST | FENCE SPIKE | Like a Professional Fencer - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust light taps. And straight down on top. So ideally don't have your hand in the way. And then justMoreJust light taps. And straight down on top. So ideally don't have your hand in the way. And then just. A few taps on top to get it. Started.
How do you put a post spike in?
2:286:30How to install a METPOST/Fence Spike like a pro! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo don't rush and let's start. So why man my knees. Because. If I'm up here. It's quite a longMoreSo don't rush and let's start. So why man my knees. Because. If I'm up here. It's quite a long strike. And there's a chance that I can miss.
Are fence spikes any good?
Why use fence post spikes? The main advantage of metal fence spikes for post support is their ease of installation, using only simple tools with no need for digging or concrete. Even high-quality treated timber posts will decay to some degree over time when sitting in concrete.
How do you get a fence post out of a spike?
2:022:59How To Remove A Steel Fence Post Or Ground Spike Out Of The GroundYouTubeStart of suggested clipEnd of suggested clipJust take a little bit into the ground first and get it underneath this collar right here. Because.MoreJust take a little bit into the ground first and get it underneath this collar right here. Because. If you try and pull it right straight up it won't come you have to actually bend.
How deep should fence post be spiked?
The 2 ft Rule. Lawsons experts recommend you should dig a hole which has a depth of 2 ft (24 in / 600mm) to ensure you have a stable timber or concrete fence post.
What are fence spikes?
Made from PVC, these non-lethal fence spikes will deter anyone from climbing over your fence, as well as help stop wildlife from landing and lingering. The brown colour will blend in with your fencing, and each measuring over 40cm in length, this pack of 10 is sure to be enough to encircle your property.
How long do post spikes last?
Due to their steel construction, the fence post anchor spikes will last for years and years (some even lasting for up to 50 years!). Even though your posts may not last quite that long, you won't need to dig a hole again, reset concrete, or anything like that.
Do fence post stakes work?
Fence post anchor spikes are a great way to quickly set a fence post. However, they do have some limitations. Because anchors are relatively light and shallow, they're not as strong as setting the fence post into concrete. As a general rule of thumb, a fence post should be about 1/3rd to 1/2 in the ground.
How do you secure a fence post without digging?
If you don't want to dig to instal your fence post, a metal spike anchor may be the best alternative. Instead of digging a hole for the post, use a metal spike anchor( this is Amazon Link) to mark the location of the hole for your fence post.
How do you get a post spike out?
0:000:45How To Remove A Fence Post Spike WITHOUT Bending It #shortsYouTubeStart of suggested clipEnd of suggested clipOkay i'm going to show you how to get a fence bike out of the ground a fence post spike uh justMoreOkay i'm going to show you how to get a fence bike out of the ground a fence post spike uh just using a crowbar. And uh and some leverage. So you just get your leverage. And your crowbar.
How do you get a spike out of the ground?
Dig around the spike until you can pull & wiggle it out. Replace earth & either hit it back in with a hammer & a block of timber (in a slightly different location) keeping it straight as you do ... or postcrete it back in straight depending on how permanent you want it to be.
How do you pull a post out of the ground?
1:132:40How To Easily Pull Out A Buried Post - YouTubeYouTubeStart of suggested clipEnd of suggested clipI need a fulcrum in that I'm using a cinder block you can use a stump or a chunk of wood maybe aMoreI need a fulcrum in that I'm using a cinder block you can use a stump or a chunk of wood maybe a five-gallon pail. Whatever you need to create an anchor.
How do you secure a fence post in the ground?
0:511:59How to install a fence post into soil - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can cover the top of the cement with soil pour water over the cement screw a couple of battensMoreYou can cover the top of the cement with soil pour water over the cement screw a couple of battens to the posts. To make sure that they remain securely upright all the time checking the levels.
How do you install fence post brackets?
1:332:46Steel to Wood and 4x4 Wood Fence Brackets - OZCO - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor installation mount the bracket to the post. Where you want the rails. Using the included screwsMoreFor installation mount the bracket to the post. Where you want the rails. Using the included screws measure. And cut the rail for a snug fit between posts.
How do you put a metal post in the ground?
0:322:07How to Install T Posts - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition your T post with the anchor plate at the bottom and perpendicular to the fence line be sureMorePosition your T post with the anchor plate at the bottom and perpendicular to the fence line be sure to orient the post with the wire locating studs all facing the same direction.
How do you put a steel post in the ground?
Set the post into the hole and attach 2x4 braces to adjacent sides of the post. Use a level to position the post perfectly vertical. Fill the hole with Fast-Setting Concrete up to 3 to 4 inches below ground level. Pour about a gallon of water per 50 lb bag into the hole and allow the water to saturate the concrete mix.
How long is a standard spike?
We offer a standard 75mm x 75mm square which will fit most fence spikes, and our fence post spikes are 750mm in length which is essential for fence post above 4ft. Each spike is fully galvanised and has drainage holes to ensure the quality of your fence post stays for as long as possible.
Do fence post spikes last?
Well, here is a guide to help show how fence post spikes are a crucial addition to the process. Fence post spikes ensure the fence last for as long as possible and will withstands the elements.
How do fence post anchor spikes work?
Fence post anchor spikes work well by allowing one to place and remove fence posts without having to dig large holes. A fence that uses fence post anchor spikes is just as stable as a fence with posts set in concrete, with the added benefit of minimizing the rotting of the fence posts.
How long do fence post spikes last?
Due to their steel construction, the fence post anchor spikes will last for years and years (some even lasting for up to 50 years!).
What is a Fence Post Anchor?
A fence post anchor is a spike normally made of galvanized (and sometimes powder-coated) steel. This spike has a box at the top of it to fit your fence post into. The box enables you to easily place the fence post into the anchor, once the anchor has been properly set and leveled in the ground.
What is the hardest part of setting fence posts?
Fortunately, the hardest part of setting fence posts when you use fence post anchor spikes is the setting of the anchor spikes themselves. Even still, it’s a fairly simple task.
What is the benefit of using a fence post anchor spike?
One of the biggest benefits of using a fence post anchor spike is ease and simplicity of setting and removing fence posts.
Is a fence post stable?
Additionally, fence post anchor spikes are very stable. Fences with posts set in anchor spikes are just as stable as fences with posts set in concrete.
Where do you put anchors when replacing a fence?
If you are replacing a pre-existing fence, put the anchors right where they were. If you are putting in a fence that wasn’t there before, be explicitly sure that you are on your own property.
What Size Fence Spike do I Need?
This obviously depends on the size of your post and the height of your fence, or other structure.
How to hit a fence spike with a mallet?
You push the fence spike into the ground as far as you can by hand, then slot the driving block into the top of the fence spike and hit the top of the block with the hammer or mallet.
Why do fence posts fail?
Most fences fail when the fence posts break due to rot or insect damage. If you have a broken fence post due to storm damage or rot, but most of the fencing is still intact you might want to just repair the post using a repair spike like the ones below. Fence post repair spike.
What happens when you tighten a rawl bolt?
With the rawl bolt, as the head of the bolt is tightened the bottom sheath expands, gripping the concrete.
How to make a driving block?
You could make your own driving block by cutting a short length of fence post and using that as a block.
What is a concrete fence post holder?
Concrete-in fence post holders are designed for use where soil conditions are unsuitable for drive-in spikes.
How to mark holes in post holder?
Place your post holder in position and mark through the holes onto the surface below using a permanent marker or similar .
Step One
Open a can of spray chalk and draw a mark on the ground at the start of the desired installation location for the fence. Walk along the length of the area and spray additional marks on the ground every 6 to 8 feet to indicate the location of each fence post.
Step Five
Back fill the hole with the removed soil and pack it down firmly using a hand tamper tool. To use a hand tamper, simply drop the flat portion repeatedly on the soil to compact it.
Step Six
Repeat the process to install the post spikes and posts in each additional hole location.
Step Seven
Walk back to the first post and hold the end of a roll of wire fencing up to it. Wrap the end around the post once and secure the loose end of the wire using a staple gun and 1/2-inch stainless steel staples. Stretch the wire across all remaining posts and secure them in the same manner with additional staples.
What happens when you add wind and rain to a fence?
Once you add wind and rain the spike will become loose and your fence panel will start to move.
What is a fence post mix?
A fence post-mix is a serious fixing and will generally outlast the fence post. You dig a deep hole about 2 feet, making sure the lower half is rounded (football size) for a sturdier fixing. A Post mix is made of shingles, cement and sand. You can purchase a single bag of post-mix that will be enough for ONE fence post.
Which is better: post mix or spike?
A post-mix is stronger and lasts many more years when compared to a spike. If you are erecting a fence for a short period then the fence spike will be the better option because it’s easy to remove.
Can you use spikes for a fence?
Fence spikes really are a very temporary solution and should never be used for a long-standing fence. Easily hammered into clay or soil. Will only last a year before they move. Good for temporary fencing. More expensive than using a post-mix.
How long is a standard spike?
We offer a standard 75mm x 75mm square which will fit most fence spikes, and our fence post spikes are 750mm in length which is essential for fence post above 4ft. Each spike is fully galvanised and has drainage holes to ensure the quality of your fence post stays for as long as possible.
Do fence post spikes last?
Well, here is a guide to help show how fence post spikes are a crucial addition to the process. Fence post spikes ensure the fence last for as long as possible and will withstands the elements.
