Keep the handle firmly in the palm of your hand. Next, place your index finger on the top of the cutter and your thumb on the side. When you cut, use your entire hand to put downward pressure on the cutter, using your index finger to keep the downward pressure on the blade.
How do you use a rotary cutter for the first time?
2:014:04How to Use a Rotary Cutter - Updated - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply even pressure to the cutter. And always cut by rolling away from your body instead of toward.MoreApply even pressure to the cutter. And always cut by rolling away from your body instead of toward. If your blade is sharp you shouldn't have to press down too.
How do you change the blade on a Martelli rotary cutter?
0:001:55Martelli ERGO Rotary Cutter Assembly - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen you receive your Martelli rotary cutter to disassemble turn the bolt clockwise. And pullMoreWhen you receive your Martelli rotary cutter to disassemble turn the bolt clockwise. And pull straight out flip the guard back and pull the blade directly. Out.
How do you use a rotating cutter?
Cutting Your FabricStep 1 - Take your fabric piece and lay it on your cutting mat, so the raw edge is on the right side. ... Step 2 - The first cut will be to the right edge to square up the fabric. ... Step 3 - Place your left hand on your ruler to hold it in place. ... Step 4 - Cut along the ruler with your right hand.More items...•
Why is my rotary cutter not spinning?
Just changed your blade and still having issues? Double-check that you put the blade back into the rotary cutter correctly. If the bolt is too tight or the washer is put on backward, this can lead to problems. Also double-check that you cleaned out all of the fuzz and lint from the small spaces in the rotary cutter.
How do you clean a rotary blade?
0:502:28How to Clean Your Tools - YouTubeYouTubeStart of suggested clipEnd of suggested clipI clean mine every time i change the blade carefully open the blade portion of the cutter settingMoreI clean mine every time i change the blade carefully open the blade portion of the cutter setting each piece aside. Using a cotton swab dipped into the cleaner.
Where are Martelli rotary cutters made?
Martelli Enterprises is an international company based in Pensacola, Florida. We make tools, equipment, workstations and machines for sewing, quilting, and embroidery.
How do you cut fabric straight with a rotary cutter?
1:3513:26How to Cut Fabric with a Rotary Cutter for Quilt Making - YouTubeYouTubeStart of suggested clipEnd of suggested clipI hold down my rotary cutter and I make one smooth cut from the beginning to the end moving awayMoreI hold down my rotary cutter and I make one smooth cut from the beginning to the end moving away from me. So that's my first cut I just squared off the end of my fabric.
How do you cut a pattern with a rotary cutter?
1:362:42How To Lay Out A Pattern And Cut It Out Using A Rotary Cutter - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I want to make sure that my grain line is parallel my selvage edge which is my straight grainMoreSo I want to make sure that my grain line is parallel my selvage edge which is my straight grain okay so now that you have it laid out put your pattern weights on it grab your rotary cutter.
Are rotary cutters easy to use?
You won't have to fuss with securing pins, which will save you time and frustration. You also won't have to bother tracing the outline of your pattern with a marking pencil! Rotary cutters are better for cutting long, straight lines compared to scissors because they're faster and easier to hold.
How many layers of fabric can you cut with a rotary cutter?
A sharp rotary cutter blade should be able to cut cleanly through four layers of fabric at a time.
How often should you change rotary cutter blade?
When to Change a Blade. Some people like to change their rotary cutter blade after every couple of projects while others change theirs after a certain amount of hours of use. While there is no one right or wrong method, you definitely want to change the blade as soon as it starts skipping threads.
Are Bush Hog blades supposed to be loose?
Plus, the bush hog blades are supposed to be loose. As a result, the blades' setting will be loose and they will not be able to function well.
What can you do with a rotary cutter?
A rotary cutter is a tool with a very sharp circular blade, mainly used by patchworkers for cutting fabric with a special quilting ruler on a self-healing mat designed for the purpose. They are predominantly used for cutting straight edges of fabric.
How does a rotary fabric cutter work?
A rotary cutter is a fabric and craft cutting tool with a very sharp round blade set into a handle device. The blade rotates and enables you to cut faster and more effectively. They come in a variety of styles, handle shapes and sizes.
How do you use a left handed rotary cutter?
12:1721:48Left and Right Handed Rotary Cutter Demonstration! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay. You got it. No looks pretty good to me you better write down the line right there look at thisMoreOkay. You got it. No looks pretty good to me you better write down the line right there look at this even down the line now you're going to hold your hand.
How do you use a cutting tool?
2:595:59How to Use Rotary Cutting Tools - YouTubeYouTubeStart of suggested clipEnd of suggested clipI almost always just line the ruler up against with the cut edge of the fabric. So this time I'mMoreI almost always just line the ruler up against with the cut edge of the fabric. So this time I'm going to show you how to do a straight cut and I'm going to cut a 1 inch strip off of the fabric here.
How to contact Martelli?
For additional product videos visit our YouTube channel , call 1-866-996-1400 or [email protected]
What is a Martelli ruler made of?
The material will move with your ruler allowing you to now move your fabric and not your body when making cuts. The rulers are made out of durable plastic so there are no worries about chipping or cutting into your rulers. All of the Martelli rulers are cut on a CNC machine to ensure that they are 100% accurate.
What is the best rotary cutter for arthritis?
Do you have problems with arthritis, carpel tunnel syndrome, or tendinitis? Then the Martelli ErgoCutter—the only truly ergonomic rotary cutter—is right for you! Unlike traditional rotary cutters, the ErgoCutter is held in a natural position with your arm and palm of your hand evenly distributing all of the pressure. It relies on pressure from your entire arm and hand instead of just your wrist and fingers.
What is the best ruler for strip cutting?
These are the only rulers that are 100% accurate for strip cutting because there is no wiggle room for your blade to move. The Martelli rulers have the Martelli no-slip material on the bottom of them to hold your fabric in place so you do not have to re-cut and waste material. The material will move with your ruler allowing you to now move your fabric and not your body when making cuts. The rulers are made out of durable plastic so there are no worries about chipping or cutting into your rulers. All of the Martelli rulers are cut on a CNC machine to ensure that they are 100% accurate.
What angle do you use for a mat?
The mat also features 45-degree and 60-degree angles as well as concentric squares for squaring up your blocks . To increase the life span of your mat, we recommend you use our Martelli cutters and blades, and alternate sides and areas that you use.
What is the key to an ergonomic cutter?
The design and form of the grip is the key to the ErgoCutter. It facilitates a better, more ergonomic fit in your hand. By changing the way the cutter is held and the way pressure is applied, our cutter does more work with less strain on your hands and arms.
How to hold a cutter?
To hold the cutter properly, grip the handle in your palm and place your index finger on the clear part of the cutter above the blade. Keep the handle firmly in the palm of your hand. Next, place your index finger on the top of the cutter and your thumb on the side.
What is a rotary cutter?
Whether you sew, craft or enjoy finish work, a rotary cutter can become your best tool. A rotary cutter features a circular blade attached to the end of a handle. These tools are used to cut a perfectly straight line without having to lift the material with your other hand. They function best on a solid surface that cannot be scratched or cut open, such as a strong plastic. Rotary cutters are sold in multiple sizes and with countless different features to make your particular job easier. While you think about what your rotary cutter will be used for, let’s do a little more research on the different types of rotary cutters out there.
What material is the best for a rotary cutter?
Another feature to think about is the material that the manufacturer used to make the blade. Look for a cutter made from tungsten. Stainless steel is another strong material to look for. If you can find a rotary cutter with a good strong blade, you won’t have to replace it as often. Another highly recommended material is carbon steel. Some of the best kitchen knives are made from carbon steel. You’ll know you’ve found a good rotary cutter when they are made with good steel.
How many layers can a 45mm cutter cut?
This 45mm rotary cutter can cut up to fifteen layers at a time without stress on hand and wrist. Spring loaded guard; easy blade replacement and comfort contoured grip. Cutter fits into the natural position of your hand for superb maneuverability. Perfect for arthritis; carpel tunnel; tendonitis or hand fatigue. Replacement blades can be purchased individually or in packages of five. This package contains one right-handed cutter: also available in left-handed (sold separately).
Where does a rotary cutter blade project?
Remember that a rotary cutter blade usually projects out the top of the handle, so you’ll have to get used to cutting from a different angle than other scissors and tools.
How big should a ruler mat be?
When looking into accessories, find a ruler mat that is roughly 24×36 inches to accommodate your fabrics. You’ll also want the ruler mat to be clear so you can see the fabric while you cut and ensure that it is not bunching up.
Do rotary cutters come with blade covers?
The blade usually retracts as soon as you stop putting pressure on it, which is another built-in safety mechanism. In addition, you can find rotary cutters that come with blade covers to both protect users and blades when not in use. Of course, you should always keep rotary cutters in a safe place away from children.
