Directions for use:
- 1. While filling your spa, pour the entire bottle of Metal Gon evenly around the hot tub's edge
- 2. Once the hot tub is full, run filter for at least 30 minutes
What is metal Gon and how do I use it?
Leisure Time Metal Gon is a concentrated formula that prevents metal buildup Metal Gon sequesters iron, copper and other metals and prevents staining of spa surfaces. It is a highly concentrated formula and should be added at every start up.
What is metal gon for spas?
Questions? Metal Gon is a metal sequestering agent spa chemical that is useful in a few specific moments in a spa's lifetime. For any spa under 600 gallons, you'll add one bottle of Metal Gon when the spa is filled for the very first time. Then you'll repeat the procedure when the spa is emptied and refilled.
How much metal Gon do I add to my spa?
For any spa under 600 gallons, you'll add one bottle of Metal Gon when the spa is filled for the very first time. Then you'll repeat the procedure when the spa is emptied and refilled. Metal Gon is a preventative spa chemical that works to keep your water clean and clear of rusty, brown, black and green spa water imbalances.
How do I use metal gon in my softub?
Tip: As you refill the water in your Softub, Metal Gon will coat the sides of your tub so that calcium deposits won’t stick. Maintenance: If fresh water is frequently added due to evaporation or bather activity, you may need to add extra Metal Gon.
What is metal gon?
How to get rid of mineral stain on heating element?
How long does it take for Metal Gon to work?
Turn on you spa's jet pump(s) and pour the full bottle of Metal Gon in your spa's filter compartment. Allow the jets to run for 30-45 minutes and then turn the jets off. You need to allow the Metal Gon to circulate through the spa's plumbing lines over the next 8-12 hours.
How does Metal Gon work?
Leisure Time Metal Gon is an easy to apply, concentrated formula that prevents iron and other metals from building up in your spa. Use with each refill to quickly neutralize metals in your spa and prevent unsightly stains.
How do you put Metal Gon in a hot tub?
Directions for use: 1. While filling your spa, pour the entire bottle of Metal Gon evenly around the hot tub's edge....Item DetailsProtects your hot tub from metals and minerals in the water.Prevents buildup, staining and green hair.Helps to remove copper, iron, and other minerals.Compatible with all sanitizing systems.
Does Metal Gon remove calcium?
3. As you fill the spa, add one bottle of Metal Gon. This is a sequestering agent that will prevent minerals such as calcium, iron, copper and manganese from staining the spa surface or damaging the heater and plumbing.
When should I put the metal in my hot tub?
The Power of Metal Out Use: Add 16 oz. to spas up to 500 gallons of water while it is being filled, before any sanitizer is added. Remove and clean cartridge filter within 24 hours of dose with filter cleaner. NOTE: Draining and cleaning a spa or hot tub is recommended every 3 months.
When should I add metal to my hot tub?
When do I use it? Use Metal Gon during start up of a new spa or after a drain and refill.
Can I add metal Gon later?
3. Add an entire bottle of Leisure Time® Metal Gon for every 500 gallons of fresh water. Let the hot tub run for at least 30 minutes. Snyder Pools recommends waiting 24 hours before adding any other chemicals.
How do you use a metal free spa?
Initial Dose: Add 1 capful (4oz) per 400 gallons directly to spa water evenly around the edge immediately after initial fill and after each drain and refill. Weekly Maintenance Dose: Add 1oz per 400 gallons (one quarter of the large cap) weekly directly to spa water evenly around the edge.
How do you get metals out of hot tub water?
Here's what I discovered: To get rid of iron and other metals in your hot tub water, use a product designed to eliminate metals from water such as Spa Choice Metal Free Stain Remover. Iron in hot tub water can interact with chlorine and turn your hot tub water green, at least temporarily.
What is a sequestering agent for hot tubs?
A sequestering agent helps remove calcium and heavy metals from your water. The presence of metals or minerals can cause your hot tub water to turn an unsightly hue— brown, red, orange, or green. When to add a sequestering agent: Use a sequestering agent if your hot tub water is brown, red, orange or green.
How do you turn a hot tub into a stock tank?
1:3919:00Stock Tank HOT TUB DIY Guide (propane) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe holes into your stock tank pool just like you did with the filter pump it's pretty simple prettyMoreThe holes into your stock tank pool just like you did with the filter pump it's pretty simple pretty straightforward. But you'll need a smaller smaller drill bit that is also in the parts. Section.
How do you use leisure time defender?
Dosage Amount: For spas up to 800 gallons of water use 2 ounces. For spas over 800 gallons of water use 4 ounces....Directions for use:Use Defender when water is cloudy and weekly to prevent scale formation.Add recommended dosage directly into the hot tub.Turn ON the filter system for 1 hour or your normal filter cycle.
What is a hot tub sequestering agent?
A sequestering agent helps remove calcium and heavy metals from your water. The presence of metals or minerals can cause your hot tub water to turn an unsightly hue— brown, red, orange, or green. When to add a sequestering agent: Use a sequestering agent if your hot tub water is brown, red, orange or green.
How do you turn a hot tub into a stock tank?
1:3919:00Stock Tank HOT TUB DIY Guide (propane) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe holes into your stock tank pool just like you did with the filter pump it's pretty simple prettyMoreThe holes into your stock tank pool just like you did with the filter pump it's pretty simple pretty straightforward. But you'll need a smaller smaller drill bit that is also in the parts. Section.
What is metal gon?
Metal Gon is a concentrated product that suspends and neutralizes mineral elements that can stain and corrode your Softub spa. Metal Gon also acts as a clarifier to cluster unfilterable microscopic minerals together so that they can be removed in the filtration process.
How to get rid of mineral stain on heating element?
Allow the water to circulate overnight or until the water is clear. This will help to control any mineral staining and will help to protect the heating element from corrosion. If staining continues due to excessive mineral levels in water, increase dosage. Ingredients / Indications.
Special offers and product promotions
Create your FREE Amazon Business account to save up to 10% with Business-only prices and free shipping. Register today
From the manufacturer
For nearly 30 years, Leisure Time has been the premier name in spa water care. Leisure Time spa offers its Leisure Time Simple Spa Care program, an easy-to-follow spa care routine that allows spa owners to spend more time in their spas and less time maintaining them.
Product Description
Metal Gon from Leisure Time sequesters iron, copper and other minerals that get into your spa or hot tub water and prevents staining of spa surfaces. A highly concentrated formula, this hot tub chemical treatment only needs to be added when you start up your spa at the beginning of the season, lasting a very long time.
What is metal gon?
Metal Gon is a concentrated product that suspends and neutralizes mineral elements that can stain and corrode your Softub spa. Metal Gon also acts as a clarifier to cluster unfilterable microscopic minerals together so that they can be removed in the filtration process.
How to get rid of mineral stain on heating element?
Allow the water to circulate overnight or until the water is clear. This will help to control any mineral staining and will help to protect the heating element from corrosion. If staining continues due to excessive mineral levels in water, increase dosage. Ingredients / Indications.
