
How To Use Moen Cartridge Retainer Removal Tool
- Make The Faucet Cartridge Visible. Use the closest accessible cutoff valve to stop the flow of water from the faucet.
- Put The Cartridge Puller In Place. Back out the screws and socket nut as far as possible to prep the puller tool. Ensure...
- Keep The Cartridge Puller Secure. The puller screw should be fully tightened with a...
Full Answer
How to clean a Moen cartridge?
Should I clean the valve before installing a new cartridge?
- Clean the inside of the valve body with a soft bristled nylon brush (e.g. old toothbrush), to remove any mineral buildup.
- Hold a bowl or similar object over the top of the valve to help direct the flow of water in the next step.
- Briefly turn on only the water supply line for the side experiencing a low flow of water issue. ...
How to remove a Moen Posi temp cartridge?
- Shut off the water to the house & open a faucet to relieve pressure
- Remove the faucet handle
- Remove the handle adapter and collar
- Remove the retetion clip
- Loosen the cartridge with the included plastic part and pliers
- If the plastic tool does not loosen the cartridge, use a puller
- Remove the cartridge
How to remove aerator from Moen pull out kitchen faucet?
Steps to remove an aerator from your faucets:
- Loosen and remove spray head and the hose.
- Use a clamp or clothespin to block off the hose, so it does not start retracting back.
- Unscrew the spray head.
- Find where the aerator is in the spray head or the hose, and remove it using a screwdriver.
What is the difference between Moen 1225 and 1225B cartridge?
Moen 1225b cartridge is almost identical to the Moen 1225 cartridge except that it is made of plastic instead of brass. Another difference lies in the packaging, but both are quite similar to each other in terms of features. This model, too, can be used as a perfect replacement choice for any Moen one-handle faucets.
See more

How do you use the Moen cartridge removal tool?
0:464:20How to use cartridge puller to remove Moen cartridge DIY video #diy ...YouTubeStart of suggested clipEnd of suggested clipThat comes out of the bottom you want to loosen that up a little bit you'll see down on this sideMoreThat comes out of the bottom you want to loosen that up a little bit you'll see down on this side there's a screw in there that will connect inside our cartridge there's an opening for a screw there.
Is there a tool to remove a Moen cartridge?
The 104421 Moen Cartridge Puller can be used to remove single handle cartridges 1200, 1225 and 1222.
How do I get a Moen cartridge out?
1:133:14How to Remove & Install the 1222 Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the cartridge is in the on position the notch in the stem should be facing up remove theMoreMake sure the cartridge is in the on position the notch in the stem should be facing up remove the cartridge from the valve. You can also use the Moen cartridge removal tool to pull out the cartridge.
How do you remove a Moen cartridge without the tool?
1:282:32How to Remove Stuck Moen Tub Faucet Stem Without Special ToolYouTubeStart of suggested clipEnd of suggested clipBut now it's ready to just basically pull the stem straight out and and then you'll be on your wayMoreBut now it's ready to just basically pull the stem straight out and and then you'll be on your way to Home Depot or Lowe's or wherever to pick up a new stem anyways.
How do you remove a cartridge from a Moen kitchen faucet?
0:512:32How to Change Moen Kitchen Faucet Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the cartridge retaining nut go ahead and grab your channel locks loosen that up. And remove it.MoreAnd the cartridge retaining nut go ahead and grab your channel locks loosen that up. And remove it. You'll then pull out your cartridge.
How do you get a stuck Moen 1224 cartridge out?
The official instructions for removing the Moen 1224 cartridge are to remove the retaining nut and then simply pull up with a pair of pliers on the cartridge to remove it.
How do you remove a stubborn faucet cartridge?
0:045:44How to remove a stuck cartridge or stem from any brand faucet!YouTubeStart of suggested clipEnd of suggested clipLet that set up for a few minutes tap on it a little bit. Then you don't want to get a large pipeMoreLet that set up for a few minutes tap on it a little bit. Then you don't want to get a large pipe wrench I use like a 16 or 24 inch pipe wrench to back it up. Then I take my nip X pliers wrench.
How do you remove a Moen 1225 cartridge?
2:239:23THE PROPER WAY TO REPLACE A MOEN 1225 CARTRIDGE - YouTubeYouTubeStart of suggested clipEnd of suggested clipLike so we'll get a pair of channel locks. And start tightening that thing down so we can extractMoreLike so we'll get a pair of channel locks. And start tightening that thing down so we can extract that cartridge all right nice. And easy take your time.
How do you remove a shower cartridge without a puller?
2:4114:48Removing a Stuck Moen Cartridge Without Proper Cartridge PullerYouTubeStart of suggested clipEnd of suggested clipYou know kind of wiggle it and pull over straight. Up. Kind of seized. Off. Just keep wiggling likeMoreYou know kind of wiggle it and pull over straight. Up. Kind of seized. Off. Just keep wiggling like that I'm going to pull the great up this is part can you play something.
How many types of Moen shower cartridges are there?
Fortunately, Moen makes this process fairly simple because, over the last 40-years, they have only made four different types of cartridge valves. These are numbered 1200, 1222, 1225, and 1255.
How to remove a cartridge that won't disengage?
If the cartridge will not disengage, turn the large hex nut with a wrench one full turn, then pull the puller away from the cartridge again. Repeat until the cartridge can be removed. Advertisement.
What is a cartridge faucet?
A cartridge faucet utilizes a plastic or metal cylindrical cartridge, which contains a stem that moves when the faucet's handle is operated. When the stem is raised, holes within the stem line up with holes in the cartridge to allow cold and hot water to mix together.
How to contact a cartridge nut?
If you have an imbedded cartridge nut and would like additional help, feel free to contact us or call us for assistance at 1-800-BUY-MOEN ( 1-800-289-6636 ): 1224-install.mp4. Video Player is loading. Play. Mute.
What is the number to call for a faucet nut?
If you have an imbedded cartridge nut and would like additional help, feel free to contact us or call us for assistance at 1-800-BUY-MOEN ( 1-800-289-6636 ).
Does the 4000 cartridge have a removal video?
This 4000 Cartridge does not have a Removal & Installation Video. Feel free to contact us or call us for assistance at 1-800-BUY-MOEN ( 1-800-289-6636 ). We're happy to help. TWO HANDLE FAUCET CARTRIDGES: Cartridge 1224 - Two-handle replacement cartridge (hot or cold).
Is Moen faucet backed by a lifetime warranty?
Moen products have been manufactured under the highest standards of quality and workmanship. Most Moen faucets are backed by Moen's Lifetime Limited warranty. For more information about your Warranty, please visit our Warranty Information page.
