Simply attach a wood cutting blade to the tool, then plunge cut straight through the casing. Most oscillating multi-tools offer a huge variety of sanding attachments. Simply pick the sanding attachment that works best, and you can sand just about anything with your multi-tool.
Full Answer
Can you cut a plunge cut with a multi tool?
The tool is designed for “impossible” plunge cuts. It makes them easy—if you use the right blade. While multi-tools are commonly used to cut holes in drywall for electrical boxes, they can tackle any job that needs a plunge cut.
What can you cut with an oscillating multi tool?
Just as solid wood, an oscillating multi-tool can cut all common wood product sheets such as plywood, MDF, particleboard, and OSB. The recommended blade type is a bi-metal plunge cut or segment saw blade. Melamine-laminated wood product sheets can be cut with the same blade and techniques, but wear the blade down faster.
Can you use a multi tool to cut wood?
You can use any saw blade type – carbon steel, bi-metal or carbide – with wood, although the bi-metal blades with slightly larger teeth and some set will be most efficient cutters. Rather than the material, the limiting factor in cutting lumber with an oscillating multi-tool is the thickness of the cross section to be cut.
How do you cut aluminum with a multi tool?
An oscillating multi-tool can be used to cut aluminum. All common aluminum alloys are relatively soft compared to most steels, and can be easily cut using bi-metal plunge-cut and segment saw blades intended for metal. With significant set and larger teeth, these blades allow for good chip removal and cutting efficiency.
How do you plunge cut with a multi-tool?
0:000:54Intricate plunge cuts with a multi-tool - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you don't want to bang the doorframe too much with a chisel. This is the ideal thing this willMoreAnd you don't want to bang the doorframe too much with a chisel. This is the ideal thing this will plunge through the keep you can remove that section and it's perfect you.
What is a plunge cut blade used for?
1:185:08How to Choose the Right Blade for an Oscillating Tool or Multi-toolYouTubeStart of suggested clipEnd of suggested clipIt's a good choice for plunge cuts and materials like laminate flooring. And for cutting door jamsMoreIt's a good choice for plunge cuts and materials like laminate flooring. And for cutting door jams and casings during tile wood or laminate flooring installations.
How do you use a plunge cutter?
2:558:42Plunge Saws & Tracks - Do You Need One? - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress a little button and you can push. The blade down into the work. And that's against the springMorePress a little button and you can push. The blade down into the work. And that's against the spring so in your release. All comes up and it's nice and safe behind its housing now the blade.
How do you cut a straight line with an oscillating tool?
How to Cut Straight. To create a straight cut, a round or half-moon saw blade works best. You want to lightly press down on your tool creating a cut no more than 1/4 inch deep. Run your blade across the length of the cut multiple times with each pass making it a little deeper until you cut through your material.
How do you make a plunge cut?
0:551:53HOW TO MAKE A PLUNGE CUT WITH A CIRCULAR SAW - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour saw up. Line up your guide in the front of your saw. Get your blade going at full speed. AndMoreYour saw up. Line up your guide in the front of your saw. Get your blade going at full speed. And line up with your line that you're gonna be cutting plunge. Your blade through the wood.
How do you cut a circle with a multi-tool?
4:4914:105 More Awesome Oscillating Tool Tricks - YouTubeYouTubeStart of suggested clipEnd of suggested clipTools is get yourself a piece of veneer. And sneak down in behind and in this case you're going toMoreTools is get yourself a piece of veneer. And sneak down in behind and in this case you're going to want to use the wood. And metal because you're going to be cutting metal.
Are plunge saws worth it?
I would always recommend using a plunge saw with dust extraction. You will not only save time in getting the job done, but you will also prolong blade and tool life, protect yourself and others from inhaling potentially harmful dust particles along with saving loads of time in cleaning up afterwards.
How do you use a plunge cut on a circular saw?
1:074:27How to Make a Plunge Cut with Circular Saw Cut Shape in WoodYouTubeStart of suggested clipEnd of suggested clipSo what we're going to do is we're going to do what's called a plunge cut. And what we do is we takeMoreSo what we're going to do is we're going to do what's called a plunge cut. And what we do is we take the shoe the shoes the bottom of the saw here alright and this is a reference.
Can you plunge with a straight router bit?
0:473:05Plunge Cuts with a Standard Straight Bit - Quick Tip - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I'm going to lightly plunge the bit down into the workpiece. Until it stops. Because it's onlyMoreAnd I'm going to lightly plunge the bit down into the workpiece. Until it stops. Because it's only going to go up to cut so deep before the end of the bit contacts the workpiece.
Are oscillating multi tools worth it?
The Bottom Line Are oscillating tools worth it in general? For the most part, yes. In two out of the three tests (cutting and sanding), even those on the bottom of the oscillating pile were more effective than the control tools.
What do you use an oscillating multi-tool for?
The oscillating multi-tool is one of the handiest tools you can have around the jobsite or workshop. Its versatility lets you accomplish numerous tasks that would be impossible with other tools. You can sand; saw metal, wood, and drywall; make large holes; plunge cut into hardwood; or undercut a doorway.
Can you use an oscillating tool to cut plywood?
HCS Japanese Tooth Oscillating Blade This blade can make the smoothest and most accurate cuts out of all oscillating tool blades. It uses its extremely sharp teeth to aggressively cut through wood, plywood, particle board, plastic, sheetrock, drywall, fiberglass and other non-metallic materials.
What is a plunge cut with a chainsaw?
2:593:42Chainsaw Boring Cut, otherwise called a Plunge cut - YouTubeYouTubeStart of suggested clipEnd of suggested clipI cut from the top down on this log it's propped up over here it'll cause the cut to close like thisMoreI cut from the top down on this log it's propped up over here it'll cause the cut to close like this Oh cross my chainsaw.
How do you plunge a cut with a jigsaw?
1:142:46Jigsaw Plunge Cut Technique - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm going to exaggerate this you drag the jigsaw. Forward in the cut. So you're starting to cut asMoreI'm going to exaggerate this you drag the jigsaw. Forward in the cut. So you're starting to cut as you start to plunge in you drag it forward while you're continuing to plunge downward.
How do you plunge cut with a reciprocating saw?
1:392:52How To Use A Reciprocating Saw - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's good for plunge cuts. Set the shoe against the surface with the tip of the blade at the startMoreIt's good for plunge cuts. Set the shoe against the surface with the tip of the blade at the start of the cut. Start the saw with the blade off the surface.
Can you cut brick with an oscillating tool?
Cutting through cement, brick or stone can be very easy and your multi-saw will shine like a star when you use the right oscillating blade.
What is multi tool?
As the name suggests, a multi-tool is a highly flexible power tool that can perform a number of tasks to the standards you’d expect. It means you won’t need to invest in different tools for different tasks if your space or budget doesn’t allow it.
What can you slice through with an electric multitool?
Once you have the right electric multi-tool, you’ll be able to slice through a range of materials with ease – wood, metal, drywall, mortar, fibreglass and plastic. You can even find heads with multi-tools such as the Milwaukee C12MT-0 that are specifically for polishing and grinding.
How to remove mortar from tile?
It means you can remove hardened thin-set mortar from a floor tile that you're trying to salvage. Set mortar, cement and dried adhesive can be taken off in only a few seconds by using an oscillating grinder attachment for your multi-tool.
What is Makita DTM50Z?
The Makita DTM50Z multi-cutting tool is just one example of how easily it can be done. Just get yourself a steel scraping attachment and put all those OPMs to good use. Slip the blade under a patch of adhesive or a vinyl floor tile, scrape and pull. The job will be done before you know it.
What are oscillating multitools used for?
In addition to uses such as cutting, sanding, polishing and grinding that we’ll explore in more detail below, oscillating multi-tools come with other standard features that make them such a great addition to your toolbox:
What is the upside of a multitool?
If it’s a decision between an angle grinder and a multi-tool, one upside of a multi-tool is that you won't spread anywhere near as much dust. The accessories come in a range of thicknesses and shapes that you can use on wide or narrow grout joints – whichever best fits the task at hand.
How to clean rust from metal?
5. Removing rust from metals. Using a fine pad with a multi-tool sander means you can clean rust from almost all mistreated metalwork. You can use an oscillating tool, for example, to remove rust from old garden tools and restore them to their former glory.
What Multi Tool Blades do I need?
Oscillating Multi Tools are one of the most, if not the most versatile tools on the market. They can be used for so many different things and are loved in so many trades. Whether its for cutting, sanding or grinding, Toolstop has the accessories for you.
What is a bi metal blade?
Look out for oscillating blades labelled 'Bi-Metal' (BIM). These blades perform best in metal cutting applications as they are tougher, stronger, sharper and longer lasting than standard blades. They are great at cutting wood with embedded nails.
What are Starlock Blades?
More and more brands these days are making their multi tool blades Starlock compatible. But what are Starlock Blades and why are they so special?
What is a segmented cutting blade?
Segmented Cutting Blades. Segmented cutting blades resemble a round, half moon shape. They are typically used for making long, linear cuts and creating plunge cuts in wood, metal PVC, and more (depending on the material the blade is designed for, of course).
Do you need hex keys for multi tool?
They simply click onto your multi tool, no need for hex keys, allowing for much faster and efficient accessory changes. You will find that they are often colour coded for easier identification of blade type for the specificed application.
Can you sand with an oscillating multi tool?
Did you know you can also sand with your oscillating multi tool? Simply replace the blade attachment with a sanding pad and you are good to go. Of course, this method is only really designed for smaller surface sanding and prepping jobs. *Tip - Use hook and loop sandpaper as this is better at removing the dust!*
What blade to use for nailing?
If you suspect you might hit nails, opt for a carbide blade that can tackle wood and nails. Not only will it get the job done, but it should last for dozens of jobs. The technique uses a tile or piece of wood which the tool sits atop. This sets the height of the undercut.
What is a multitool?
Designed for smaller applications, a multi-tool does its best work in areas where accessibility is key. Typically, when you need an oscillating multi-tool, no other tool will get the job done. Using an oscillating multi-tool simply involves attaching the appropriate accessory and turning it on. Originally, every tool had its own type of connection.
What is oscillating multitool?
The oscillating multi-tool is one of the handiest tools you can have around the jobsite or workshop. Its versatility lets you accomplish numerous tasks that would be impossible with other tools. You can sand; saw metal, wood, and drywall; make large holes; plunge cut into hardwood; or undercut a doorway.
Can you use an oscillating multitool as a detail sander?
The action on an oscillating multi-tool gives it a sort of orbital sanding action when used over small areas. Swapping the blade attachment for the sanding attachment, you can use the oscillating multi-tool as a small detail sander. It’s not a replacement for other handheld sanders, but it will work for small areas.
Can you scrape linoleum with a multitool?
I’m sure you can think of at least three places to use this function right now. You don’t want to use an oscillating multi-tool to scrape an entire floor , but for focused areas, it gets down to business. For larger areas use something like the Makita floor scraper.
Can oscillating multitools be used for undercutting?
Perhaps the best way Pros use an oscillating multi-tool is for undercutting doors when tiling or flooring. We did quite a bit of flush-cutting when we did our Pergo Outlast laminate flooring review. Get a good Japanese tooth blade when going after hardwood trim, and you’ll be done in no time. If you suspect you might hit nails, opt for a carbide blade that can tackle wood and nails. Not only will it get the job done, but it should last for dozens of jobs.
What are multi-tool blades?
As an umbrella term, multi-tool blades house the various types of blades which we use for multifunctional purposes. Blades such as carbide multi-tool blades, multi-tool tile blade, multi-tool metal cutting blades, multi-tool diamond blades, and oscillating multi-tool blades are the type of multi-tool blades we have.
Selecting a Multi-tool Blade
Before selecting a multi-tool blade, there are certain factors that we must crucially consider if we are to make an ideal choice. Your selection must be based on these factors. You shouldn’t procure any kind of multi-tool blades until you have assessed them with these factors.
1.Check for whether it is compatible with your oscillating tool
One of the most prominent features of oscillating tools is their versatility. They are versatile in the sense that you can quickly select a wide range of accessories and blades to handle jobs such as polishing, sanding, cutting, to mention but a few.
2.Consider the design of the blade to determine its ease of use
It is another critical factor to consider when selecting your multi-tool blade. It is crucial to consider the design of your tool blade because this determines how comfortable you will be working with it.
3.Check for the multi-tool blade manufacturer
The manufacturer of a multi-tool blade is a very crucial factor to consider. You should ensure that the manufacturer of the blade you are buying has an efficient and reliable track history.
4.Crucially consider the speed of the multi-tool blade
The speed of the multi-tool blade is quite essential as it ensures how quick you are in handling some projects. Projects, such as sanding, may require sanding pads, which will run at slower speeds, but to conclude a nail or meter-cutting job, you will need sturdy blades running faster.
5.Reflect on the pricing
It would be best if you considered the price of the multi-tool blades. Of course, you do not have to empty your pocket simply because you need to purchase them. There are some blades which are affordable and which meet your requirements.
What Can I Do With a Multi Tool?
As you can see, an oscillating multi-tool has excellent potential. But what are the multi tool uses and how exactly can you use one? Saying it can have multiple attachments is still quite vague! To give a clear idea, we have listed some of the main ways you can use this type of power tool below:
How to remove broken material from saw blade?
Once you have the head or blade attached, start the tool and push it forward at a slight angle and keep pressure applied. The saw blade will remove the unwanted materials in chunks. We advise stopping periodically to remove the broken material and clear your working area so you can check your progress easily. Also, check the angle to ensure that you are only removing the unwanted material, and not any of the solid surfaces beneath it.
What is oscillating multitool?
Of all the power tools you can buy, an oscillating multi-tool is the most versatile. This handy power tool allows you to tackle multiple DIY projects. It can do anything from removing grout and sanding, to plunge cuts and removing old paint!
How to release oscillating tool head?
Usually, you can release the tool blade head either via a switch, or a locking nut and Allen key. If you have read the instructions, you should easily be able to change the head. You will find it much easier if you practice changing the head and attaching things like the multi-tool blade beforehand.
What happens if you use the wrong blade on a saw?
If you use the wrong type of saw blade, you could damage the material, and even damage the blade and tool. For example, a saw blade for plunge cuts is suitable for wood, but it may not be suitable for cutting tiles or cement. You may need a tougher circular blade or even a diamond-tipped blade to tackle tougher materials. Always check the instructions and contact the manufacturer if you are unsure.
What can you use to sand a metal?
For example, you can use a sanding attachment, a reciprocating saw, a carbide blade, or a circular metal cutting disk. There is an endless variety of accessories you can use, hence the name!
Can you use a scraper blade attachment on an oscillating tool?
Finally, when using an oscillating tool, you can use the scraper blade attachment for “removing”. This can include the removal of old paint, grout removal, mortar removal, and adhesive removal.
What blade to use for plunge cuts?
A straight blade is best for plunge cuts, where you stab the blade into the surface. For long, linear cuts, use a round oscillating saw blade. You'll get cleaner cuts with the round blade if you make a shallow scoring cut first, then gradually deepen it with an oscillating saw.
What blade to use to cut metal?
Use a Bimetal Blade to Cut Metal. Beware: Most blades sold in stores are meant for soft materials like wood and plastic. Cutting metal destroys them in a few seconds. For metal cutting, be sure to buy blades labeled bimetal.
How to pull out an old toilet?
Ditto for the bolts that fasten the tank to the bowl. And if the bowl is caulked to the floor, you can switch to a scraper blade and slice right through the joint.
How to shave a little off a cabinet?
Need to shave a little off a cabinet or a piece of trim because someone read the tape measure upside down? Use the oscillating tool to make a clean, precise cut and make the problem go away. Use a straightedge if you need a guide for the os cillating saw blade. Just watch that the blade doesn't gouge the straightedge and go off-course.
What tool to use to cut through door jambs?
If you're installing a new floor, a flush-cutting blade on an oscillating saw tool will slice through doorjambs like butter! With a scrap of flooring as a guide, the oscillating tool will make straight, clean cuts so that the new flooring will easily slip into place.
How much does a carbide blade cost?
A carbide blade (about $25) is fine for small jobs. For larger jobs, a diamond blade ($40 and up) saves you money because it lasts two to three times as long. Both types come in 1/16-in. and 1/8-in. thicknesses to match grout widths.
What is the best blade for cutting pipe?
Extra-wide blades like this 2-1/2-in. version are perfect for cutting round stuff like pipe because they don't slip off a curved surface the way narrow blades do. For other jobs, narrower blades are usually best: They plunge-cut better and put less strain on the motor.
What blade to use to cut plywood?
Cutting a piece of plywood with an oscillating multitool and a wide plunge-cut blade. Just as solid wood, an oscillating multi-tool can cut all common wood product sheets such as plywood, MDF, particleboard, and OSB. The recommended blade type is a bi-metal plunge cut or segment saw blade.
What blade should I use for metric bolts?
A low strength grade metric bolt cut using an oscillating multi-tool with a bi-metal blade . Bi-metal blades are OK for the lowest grade bolts, but high strength and stainless bolts should be cut with carbide blades.
How to cut ceramic tile?
Ceramic tile can be cut using an oscillating multi-tool with diamond and carbide grit segment blades or carbide saw blades. This method of cutting tile is stable and flexible but very slow. Ceramic tiles are usually quite thin and present no particular challenge in terms of cutting capacity.
What type of saw blades can be used to cut wood?
In fact, wood is one of the easiest materials to cut with this tool. You can use any saw blade type – carbon steel, bi-metal or carbide – with wood, although the bi-metal blades with slightly larger teeth and some set will be most efficient cutters.
What tool is used to cut bolts?
An oscillating multi-tool can be used to cut machine screws and bolts. Bolts come in different strength classes, which determined the ease of cutting. Lowest strength bolts are easy to cut with a bi-metal saw blade, but higher categories and stainless steel bolts should preferably be cut with carbide saws.
What is the best tool to cut aluminum?
An aluminum profile cut with an oscillating multi-tool. Aluminum is best cut using a bimetal plunge-cut saw blade with large teeth.
What angle to cut sheet with segment saw?
The best technique to cut sheet goods with an oscillating multi-tool is running through the cut with the blade at roughly a 45 degree angle to to sheet.
