How to Use a Coil Spring Compressor Safely?
- Jack the Car Get a spring compressor kit, so that you have all the essential tools you need to compress the coil spring. Now, jack up your vehicle off the ground. ...
- Remove Car’s Tire Now remove the tire to reach the spring. ...
- Slide the Compressor Rod ...
- Use Safety Pin to Attach Clamp and Coil ...
- Twist Another Clamp ...
- Tighten the Bolt ...
- Compress Coil Springs ...
Should I replace the coil spring?
Over time coil springs weaken, so if you replace only one spring, the left and right springs will respond differently to the road and the left and ride sides may have a different ride height. Your mechanic may recommend replacing only one coil spring if the vehicle is fairly new and the replacement spring is a matching OEM part.
How to use a strut spring compressor?
The Safe Way to Compress a Strut or Coilover Spring
- Remove strut or coilover from the vehicle
- Place the lower spring hooks at three equal positions around the lower coils
- Center the spring and make sure it is dead vertical
- Place the upper spring hooks at three equal position around the upper coils
- Using the handle, compress the spring
- Remove the lower lock nut and retainer
- Remove the upper spring collet
How to use a spring compressor safely?
Use Safety Pin to Attach Clamp and Coil. Using a coil spring compressor is easy. Now, after sliding the first clamp to rod’s end, place rod against the spring. This will attach the clamp to the coil. Now, push the safety pin carefully to keep the clamp at the place. Twist Another Clamp . Look for another clamp that twists on the rod. Start ...
What is the best spring compressor for struts?
The Best Strut Spring Compressors
- ABN MacPherson Strut Spring Compressor Tool
- Shankly Coil Spring Compressor Tool. Featuring a reinforced, ACME thread and additional safety pins to allow for a secure grip, the ABN strut compressor is considered a universal coil ...
- Branick Strut Spring Compressor. ...
- OTC Clamshell Strut Spring Compressor. ...
How to use coil spring compressor?
Using a coil spring compressor is easy. Now, after sliding the first clamp to rod’s end, place rod against the spring. This will attach the clamp to the coil. Now, push the safety pin carefully to keep the clamp at the place.
How to attach a clamp to a spring?
Start with the twisting of the clamp to reach the coil, and once it is done, use a safety pin to attach the clamp with the spring. The process remains the same for attaching the clamp to the spring using a safety pin.
How many clamps are in a compressor kit?
The compressor kit consists of two rods and four clamp attachments. Pick rod and slide the rod that fits one of the clamps easily. The clamp must reach the end of the rod. Two clamps will be used to slide right onto the compressor rod while the other two clamps will just be screwed.
What is the tool used to service a car's suspension?
Tools that are utilized to service car’s suspension are called as coil spring compressors. The car coil springs assist in keeping the car off the ground. The coils are compressed, and you get to enjoy the best ride while driving your vehicle.
Is it safe to compress a coil spring?
Being safe is also the requirement when compressing a coil spring, as compressed springs are full of energy and can be potentially dangerous to you. So, to avoid any injuries, make sure you follow the right procedure to compress the coil spring and even learn some car maintenance tips.
Do you tighten the nuts on a car coil?
The tightened nuts will ensure that the clamps move up the rod. The coil must be tighter by now. Also, it depends on the car, how much tightening does it need. Read about how much your vehicle needs for safe driving. Now, disconnect the compressor as you loosen all four clamps.
