how do you use a rainbow vacuum shampooer

How to Shampoo With a Rainbow Vacuum

More items

Full Answer

Can you use a Rainbow vacuum as a carpet shampooer?

If you already have a Rainbow vacuum, you can easily transform it into a carpet shampooer with just a few extra attachments. Known as the Rainbow AquaMate, this deep-cleaning carpet care system allows you to lift dirt and grime out of carpet fibers. Use the Rainbow vacuum to collect all loose dust, dirt and debris from the carpet.

How do you use a rainbow Aqua mate shampooer?

Shampoo the carpet by selecting "soap and water" on the AquaMate switch. Select the "high" position on the Rainbow and turn it on. Run the AquaMate back and forth slowly over the floor while squeezing the trigger on its handle. When ready to rinse, turn the AquaMate switch to "water only" and go over the entire carpet once again, slowly.

How do I lock the water tank on my Rainbow vacuum?

Use the two side locks the Rainbow vacuum has in order to lock the water tank in place. If you do not lock the water tank correctly the Rainbow suction can leak therefore reducing the efficiency of the Rainbow. Be sure to align correctly the Rainbow with the wheels so the dolly can lock correctly

What are the cleaning phases on the Rainbow AquaMate?

There are three cleaning phases on the Rainbow AquaMate. Toggle between them using the lever on the back of the AquaMate attachment. The phases are Shampoo (soap bubbles), Rinse (a water droplet) and Extract (squiggly lines). Make sure the lever is on the shampoo icon and then turn the machine on.

What does the squiggly lines on the Aquamate carpet cleaner mean?

How to connect Aquamate vacuum head?

What are the phases of shampoo?

How long does it take for aquamate to dry?

What is the rainbow vacuum?

Can you use a rainbow vacuum as a carpet shampooer?

Who is Cathy Habas?

See 4 more

About this website

Can you shampoo carpet with a Rainbow vacuum?

With the use of a button, aquamate can spray shampoo into the carpet or fresh water for rinsing. After the carpet has been shampooed and rinsed another tool can be attached to the Rainbow vacuum to properly suck the water from the carpet. Once the moisture is removed, the carpet will look better.

Is the Rainbow vacuum also a shampooer?

Easy to set up and use at a moment's notice, the MiniJet harnesses the cleaning power of the Rainbow to shampoo, scrub and remove dirt and stains from smaller carpeted areas and upholstery.

How do you use a shampooer?

How To Use A Carpet CleanerVACUUM THOROUGHLY BEFOREHAND. Prepare the area you wish to shampoo by vacuuming using a powerhead vacuum cleaner. ... DON'T OVERDO THE SHAMPOO. Excess shampoo can be near impossible to clean out. ... MANOEUVRE THE SHAMPOOER IN STRAIGHT LINES. ... RUN THE SHAMPOOER A SECOND TIME USING JUST WATER.

Can you clean upholstery with a Rainbow vacuum cleaner?

0:371:46The Rainbow® Upholstery Tool - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the rainbow on and watch as the rainbow upholstery tool effectively removes dirt fromMoreTurn the rainbow on and watch as the rainbow upholstery tool effectively removes dirt from upholstered furniture. With the exclusive jet brush attached surface debris and pet hair disappear.

Can you use a Rainbow vacuum without water?

The water is the fluid which traps every dust and dirt particles that come into the Rainbow, Running your Rainbow without water allows all these particles pass into the Rainbow internal parts, and also clogging your HEPA filter, which is designed to be a backup filter to work together with the water.

Can you mop with a Rainbow?

1:573:40Rainbow JetPad - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe jet pad comes with two reusable jumbo pad cleaning pads attach a jumbo pad to the jet pad. Head.MoreThe jet pad comes with two reusable jumbo pad cleaning pads attach a jumbo pad to the jet pad. Head.

How do you clean a carpet with a shampooer?

STEP 1: Pick up your hot water extractor. ... STEP 2: Clear your space and scope out stains. ... STEP 3: Vacuum the carpet. ... STEP 4: Fill your machine with carpet shampoo and water. ... STEP 5: Clean until the extracted water runs clear. ... STEP 6: Allow the carpet to dry completely. ... STEP 7: Vacuum one last time to remove residue.

Should you vacuum before shampooing carpet?

Prepare your carpet and areas to be shampooed Begin by removing furniture from the room and then thoroughly vacuum the carpet preferably with a powerhead vacuum cleaner, before shampooing to remove loose dirt, pet hair and other particles. This should also expose the carpet stains, if there are any.

How many times do you have to shampoo carpet until water is clear?

It's not unusual for DIY carpet cleaners to need eight or even 10 passes on a carpet before the water runs clear. This is especially true when: It has been a long time since your carpet was last deep-cleaned.

What can I put in my Rainbow vacuum to freshen the air?

Citrus scents energize and cleanse the air. The Rainbow company produces a liquid deodorizing air freshener. Add the liquid to the Rainbow water tray to scent home air with aromas, such as citrus or eucalyptus, to remove cooking and unpleasant smells from the air.

Can you use a Rainbow vacuum on a mattress?

For detailed cleaning of extra difficult-to-reach areas, use the confined-space cleaner. The Rainbow inflator tool works great for quickly inflating air mattresses and other inflatable toys.

How well does a Rainbow vacuum clean the air?

0:221:53Water Wash the Air with the Rainbow® - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd is certified by the association of home appliance manufacturers as a proven air cleaner designedMoreAnd is certified by the association of home appliance manufacturers as a proven air cleaner designed to reduce air pollutants that contribute to poor air quality.

What is a RainbowMate?

RainbowMate® Extend the reach of your Rainbow Cleaning System with the RainbowMate, the accessory designed to clean limited-access areas. With its sleek, lightweight design and powerful, motor-driven brush, the RainbowMate makes it easy to achieve superior cleaning results in hard-to-reach areas.

What is the Rainbow MiniJet?

1:044:29Rainbow® MiniJet - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith its innovative onboard. Solution tank and the versatility of two interchangeable cleaning headsMoreWith its innovative onboard. Solution tank and the versatility of two interchangeable cleaning heads the rain jet is convenient easy to use and thoroughly cleans the hard floor surfaces in your. Home.

What is the Rainbow RainJet?

RainJet® The RainJet uses the natural cleaning power of water to remove ground-in dirt and grime from tile, linoleum and other hard surface floors. It features: A self-contained solution tank with the capacity to clean large rooms. Interchangeable sponge and brush attachments to scrub away embedded dirt and debris.

What is an AquaMate?

The Aquamation process uses water and alkali to mimick Mother Nature - to that end, only organic items such as food treats or flowers can be aquamated with your pet.

How to Shampoo Carpet with Rainbow Vacuum - Cleaning Beasts

Step 2: Remove the Rainbow Wand from Vacuum Head. The vacuum head sockets into the stainless steel wand. Plug out this power cable from the wand and detach the wand from the vacuum head. Then, bring into line the pins in the wand by the pins in the AquaMate addition, forceful the double together until the wand locks into the place.

Rainbow eSERIES Product Manuals - Rainbow® Cleaning System

Download the Rainbow eSERIES product user manual to familiarize yourself with the power of your new Rainbow Cleaning System.

Rainbow AquaMate (Carpet Cleaning System)

The Rainbow AquaMate is great for getting all the soil and dirt from your carpet and area rugs that your power nozzle is unable to get. Small spots or large wall to wall carpet is no problem with the shampooing system and the amazing Carpet Cleaning Formula.. If you would like more information on how to use, please read our Rainbow AquaMate instructions and blog post.

What is vacuum cleaner?

Vacuum cleaners are made to pull away dust from fabric surfaces. But with time, there are considerable advancements in technology, and you are exposed to a lot more features than just vanishing away from the dust. The massive sum of money is a thing to consider before buying these vacuums. If you are ok with it, these vacuums are the best choice for you.

How does rainbow vacuum work?

Rainbow vacuums filter the air in the atmosphere, in addition to pulling away dust from the rug. The air is filtered in the water compartment and released to the room. As a result, you get a lighter and fresher environment.

Can you use rainbow vacuums with standard vacuum cleaner?

Using the rainbow vacuums is as simple as using the standard vacuum cleaner . Refer to the owner’s manual or follow the steps below:

Is rainbow vacuum more powerful than ordinary vacuum?

They are more powerful than ordinary vacuums. The massive vacuum technology makes the vacuum pumps more powerful. It means that with rainbow vacuums, you will clean the carpets in the first go rather than moving them on the same spot frequently.

How to clean Aquamate water?

Empty and rinse the water basins on both the main Rainbow unit and the AquaMate, as well as the AquaMate's soap reservoir. Allow these to air dry before replacing their caps. Check the underside area of the AquaMate and remove any debris stuck within it.

How to remove moisture from carpet with Aquamate?

Keep pressing the trigger while rinsing the carpet. Extract moisture from the carpet immediately afterward by choosing "extract" on the AquaMate switch. Move the device back and forth even slower over the carpet to remove as much moisture as possible. This also helps protect the flooring beneath the carpet.

How to clean a carpet with Aquamate?

Run the AquaMate back and forth slowly over the floor while squeezing the trigger on its handle. When ready to rinse, turn the AquaMate switch to "water only" and go over the entire carpet once again, slowly. Keep pressing the trigger while rinsing the carpet.

How to shampoo a rainbow carpet?

Shampooing with the AquaMate is a three-step process: soaping, rinsing and extracting. Shampoo the carpet by selecting "soap and water" on the AquaMate switch. Select the "high" position on the Rainbow and turn it on. Run the AquaMate back and forth slowly over the floor while squeezing the trigger on its handle.

What is Rainbow Cleaning System?

A Rainbow Cleaning System offers an alternative to cluttering the closet with separate large devices for vacuuming and shampooing carpets and rugs. The main Rainbow device vacuums carpet, while its AquaMate accessory turns the Rainbow into a carpet shampooer. Shampooing the carpet is as simple as connecting the AquaMate attachment, adding water and a proprietary cleaning solution and then running the unit over the carpet.

How long does it take for carpet to dry?

Allow the carpet to air dry for several hours or until it no longer feels damp before replacing furniture or walking on it. Drying time varies based on the humidity and room temperature. Turn on ceiling fans to help speed up the drying process.

Who is Kathy Adams?

Kathy Adams is an award-winning writer . She is an avid DIYer that is equally at home repurposing random objects into new, useful creations as she is at supporting community gardening efforts and writing about healthy alternatives to household chemicals. She's written numerous DIY articles for paint and decor companies, as well as for Black + Decker, Hunker, SFGate, Landlordology and others.

How to refill Aquamate rug shampoo?

Eradicate the lid from the AquaMate’s soap tank. Decant a capful of the AquaMate rug shampoo distillate into the reservoir, then fill in the rest of the way by cool tap marine. Change the cap and stiffen it. Fill the distinct water reservoir on the AquaMate by cool tap liquid as well, and then squeeze its cap into habitation. If you’ve taken the container off the AquaMate base to fill it, reset back it on the base.

How to clean a rainbow rug?

Move as greatly furniture out of the way as probable to make it calmer to clean and shampoo the rug. Fill the Rainbow’s liquid booth with lukewarm water, then vacuum the area exhaustively with the Rainbow and its Control Nozzle connection. Dump the dull water down a trench and clean the water container out.

How to use Aquamate shampoo dispenser?

On the upper side of the AquaMate accessory, you’ll discover the pliable water reservoir and shampoo dispenser. Flippant it over and detach the lids on every section. Fill the great section with water. In the minor compartment, add a capful of Rainbow rug cleaner, then fill up it the rest of the way with liquid to shrill the solution. Exchange the lids and align them on the AquaMate to swap the liquid reservoir.

What is rainbow scrubbing system?

A Rainbow Scrubbing System offers a substitute for encumbering the closet with distinct large devices for vacuuming and shampooing rugs and mats. The leading Rainbow device vacuums rug, though its AquaMate fitment turns the Rainbow into a mat shampooer. Shampooing the rug is as simple as linking the AquaMate accessory, adding liquid and a branded cleaning solution, and after that running the unit on the carpet.

How many stages are there in Aquamate?

There are 3 scrubbing phases on the Rainbow AquaMate. Clasp between them by using the lever beside the AquaMate addition. The stages are Shampoo (cleanser bubbles), Stain (a water droplet), and Excerpt (squiggly lines). Ensure the pedal is on the shampoo icon and now turn the appliance on.

How to connect a vacuum head to a stainless steel wand?

The vacuum head sockets into the stainless steel wand. Plug out this power cable from the wand and detach the wand from the vacuum head. Then, bring into line the pins in the wand by the pins in the AquaMate addition, forceful the double together until the wand locks into the place. Plugin the AquaMate interested in the wand.

How long does it take for shampoo to spray out of Aquamate?

Crush the trigger on the grip numerous times in a row until shampoo sprays out. It can take equal to 20 seconds of clasping the trigger on and off to lead the AquaMate.

step1. Prepare the carpet

1. Use the Rainbow and Power Nozzle to vacuum all the space to be cleaned, making sure there is no remaining debris on the floor.

Step2

Preparation: First, vacuum the carpet thoroughly. Then you’re prepared to use your aquaMate or shampoo

Step3

Attach the water hose to any threaded kitchen or bathroom faucet. Some faucets have exterior threads and others have internal threads. Most have aerators or display screen filters the unscrew.

Step4

Set your faucet between warm and cold. Hot water could damage the system and carpet.

Step5

Remove the solution bottle by sliding the bottle release latch within the direction of the arrow.

Step7

Insert the underside wand with the male end into the opening positioned on top of the AquaMate. Press downward till the button lock clicks.

Step9

Set the AquaMate switch to the SOAP + WATER position. Turn on the Rainbow to HIGH mode.

Why do you need to use the two side locks on a rainbow vacuum?

Use the two side locks the Rainbow vacuum has in order to lock the water tank in place. If you do not lock the water tank correctly the Rainbow suction can leak therefore reducing the efficiency of the Rainbow.

What is rainbow hose?

Rainbow Electrical Hose. There are two different types of Rainbow hose, the regular and the electrical one. Any Rainbow hose needs to be attached to the intake hole, with the looking tabs facing left and right not up and down (look the video for more reference).

Why fill a rainbow with water?

If you fill the Rainbow with less water than required, the Rainbow will reduce the capacity to trap more dust and dirt.

Where is the electrical hose on a rainbow?

The electrical hose has an electrical connection in the hose end where it is connecting to the Rainbow, so you will need to open a little window in the intake face of the Rainbow in order to connect the electrical plug in addition to the side locking tabs. Check more products you can start using with your Rainbow.

What does the squiggly lines on the Aquamate carpet cleaner mean?

The squiggly lines on the AquaMate represent the Extract phase. Set the lever to this icon. The machine will begin to pull excess water from the carpet. Push and pull the AquaMate over the carpet until water stops being visibly pulled into the machine.

How to connect Aquamate vacuum head?

The vacuum head plugs into the stainless steel wand. Unplug this cord from the wand and disconnect the wand from the vacuum head. Then, align the pins in the wand with the pins in the AquaMate attachment, pushing the two together until the wand locks into place. Plug the AquaMate into the wand.

What are the phases of shampoo?

The phases are Shampoo (soap bubbles), Rinse (a water droplet) and Extract (squiggly lines). Make sure the lever is on the shampoo icon and then turn the machine on.

How long does it take for aquamate to dry?

The carpet may still feel damp after using the AquaMate. Let it dry for several hours before putting anything on top of the carpet. Routinely remove dirt and debris with the Rainbow vacuum between deep-cleaning sessions.

What is the rainbow vacuum?

Use the Rainbow vacuum to collect all loose dust, dirt and debris from the carpet. This will allow the cleaning solution to quickly target tough grease and grime embedded deep within the carpet pile.

Can you use a rainbow vacuum as a carpet shampooer?

If you already have a Rainbow vacuum, you can easily transform it into a carpet shampooer with just a few extra attachments. Known as the Rainbow AquaMate, this deep-cleaning carpet care system allows you to lift dirt and grime out of carpet fibers. Advertisement. How to Shampoo With a Rainbow Vacuum. Image Credit: jarino47/iStock/GettyImages.

Who is Cathy Habas?

Cathy Habas enjoys distilling even the most complicated home improvement tasks into bite-sized pieces. She believes in empowering homeowners one article at a time.