how do you use a siding tool

Instructions

Full Answer

What tools do you need to install vinyl siding?

What tools do I need to install vinyl siding?

• Siding Gauge.
• Zip Lock Tool.
• Power Saw.
• Utility Knife.
• Tin Snips.
• Snap Lock Punch.
• Nail Hole Slot Punch.
• Measuring Tape.

How to install real wood siding?

How to Install Exterior Wood Siding. Step 1: Gather Materials & Make a Plan. Step 2: Remove Existing Cladding. Step 3: Check Wall for Damage. Step 4: Install Moisture Barrier. Step 5: Cut Starter Plank. Step 6: Install Starter Plank. Step 7: Cut & Attach Vertical Planks. Step 8: Install Around Windows & Doors.

Should I install Windows or siding first?

Windows usually go in before siding for several reasons:

1. Capping Window capping is the fragile protective covering of aluminum or sheet vinyl. It is layered over the exposed exterior wood trim of your window. ...
2. Moisture Barrier The second problem with changing siding first is damage to the moisture barrier around the windows. ...
3. Cost and Aesthetics

How can I install siding?

• You can use either a hammer or a nail gun to drive in the nails. ...
• Drive in the nails at least 0.75 in (1.9 cm) from the edge of the piece of trim or siding you’re attaching.
• If you’re attaching fiber cement trim and siding to a non-wood wall, like a concrete block wall, you may need to use specialty screws. ...

How do you remove siding with a siding tool?

0:000:16How to use a siding removal tool! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right guys i'm going to show you how to use this siding removal tool all you got to do is comeMoreAll right guys i'm going to show you how to use this siding removal tool all you got to do is come over to the siding you want to remove slide it up into a piece of siding grab a hold the lift.

What is the siding tool called?

A vinyl siding removal tool (VSRT) is used to separate two interlocked pieces of vinyl siding in order to gain access to the nailing flange for siding removal or repairs. A VSRT is also called a zip tool because the process is similar to unzipping a zipper.

How does a zip tool work?

Enter the zip tool. This indispensable tool is little more than a metal bar with a small hook at one end and a bend at just the right angle. It allows you to get under the top and bottom edges of the vinyl siding pieces where the pieces interlock (a design that allows them to resist wind and moisture).

How do I use Sideswiper tool?

Instructions:INSERTION: Wedge tip of blade under overlapping panel and hook onto the back lip of buttlock.UNLOCKING: Pulling lip downward, slide the tool along the length of panel to unlock and expose nail row of panel to be removed.PANEL REPLACEMENT: Lock and nail replacement panel into place.

How do professionals cut vinyl siding?

For vinyl shake siding, you can cut panels using snips or a circular saw with a blade that can be used for vinyl. Snips work best for long, vertical cuts while circular vinyl siding saws work best for short, vertical cuts.

How do you remove siding without tools?

2:289:20How To Replace A Piece Of Vinyl Siding Mid-Wall (Without ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide it behind the nail. And just pull it right out. And pull out every one of the nails. That'sMoreSlide it behind the nail. And just pull it right out. And pull out every one of the nails. That's holding on this piece of siding.

How do you use a siding zip tool?

1:184:37How to Replace Damaged Vinyl Siding - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's designed so that you reach up underneath of the joint. You can grab onto that product and youMoreIt's designed so that you reach up underneath of the joint. You can grab onto that product and you can pull it loose. And you just put it in behind. Slide it in both directions. And it's disengaged.

How do I pop my siding back in place?

0:301:34How to fix loose vinyl siding - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe little hook part like here get it up under the siding. Get it hooked in. And slow down as you goMoreThe little hook part like here get it up under the siding. Get it hooked in. And slow down as you go along and push. Back. And it snaps it right back into place dad take it off.

How do you fix vinyl siding that keeps coming loose?

0:334:24How To Fix Loose Vinyl Siding (Phillips Vision: Episode - 53)YouTubeStart of suggested clipEnd of suggested clipSee here the hook. Right here and here you to pull it just like that just pull it just enough thereMoreSee here the hook. Right here and here you to pull it just like that just pull it just enough there to cover over that clip. And then when you push it in it'll lock right on.

How do you hide siding seams?

0:111:09How to Caulk Seams of Siding on a Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst i'm going to start with my seams i just put a bit of caulking on that seam and then i'm goingMoreFirst i'm going to start with my seams i just put a bit of caulking on that seam and then i'm going to come back with my finger. And smooth that in.

How do you remove siding from the bottom?

0:022:31How to Remove and Replace a Section of Vinyl Siding - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse the tool to pull down on the hooked edge while gently pulling the siding away from the pieceMoreUse the tool to pull down on the hooked edge while gently pulling the siding away from the piece below.

How do you use aluminum siding tools?

2:2915:53Removing Aluminum Siding - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo once you get it on pop use your hands. Just kind of pull it away from the piece without bendingMoreSo once you get it on pop use your hands. Just kind of pull it away from the piece without bending it and then that way you won't you won't bend the piece underneath.

What is a siding nail?

0:001:50How to Select Siding Nails - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can buy siding nails either loose for hand nailing or in coil form for an air-powered nailer.MoreYou can buy siding nails either loose for hand nailing or in coil form for an air-powered nailer. One nice thing about loose nails is that you can buy them to match stain colors.

What is a snap lock punch used for?

More videos on YouTube Use the Snap Lock Punch tool to make 3/8-Inch (1 cm) wide impressions on metal edges to join pieces of sheet metal, duct or pipe. The compound-leverage mechanism provides greater control and easy operation.

What tools are needed to install aluminum siding?

As with most DIY home projects, you'll need some basic materials and hand tools in order to properly install aluminum siding. This includes items such as a heavy duty hammer, a tape measure, safety goggles, a square, chalk line, a level, a sturdy step ladder, and a sharp utility knife.

How do you remove siding?

0:022:31How to Remove and Replace a Section of Vinyl Siding - YouTubeYouTubeStart of suggested clipEnd of suggested clipA japanese style puller's small claw makes it easier to grab the nail. Head. Once all the nails areMoreA japanese style puller's small claw makes it easier to grab the nail. Head. Once all the nails are removed push the siding piece straight down to free it from the course.

Why is it so hard to find matching vinyl siding?

When replacing vinyl siding, it can be difficult to find matching material because siding manufacturers regularly change offerings and discontinue older styles and colors. It's best if you have some spare material left over from the original siding installation.

What is zip tool?

Enter the zip tool. This indispensable tool is little more than a metal bar with a small hook at one end and a bend at just the right angle. It allows you to get under the top and bottom edges of the vinyl siding pieces where the pieces interlock (a design that allows them to resist wind and moisture). Most importantly, you won't damage the siding in the process.

How to release buttlock joint?

Separate the buttlock joint with downward pressure on the zip tool. Then, slide the tool along the length of the siding panel to release the rest of the joint.

How to secure buttlock on a wall?

Secure the buttlock of the upper panel to the top edge of the new panel, using the zip tool. Grab the lip of the buttlock with the tool and pull it over the new panel's locking edge. At the same time, use your other hand to push from the outside of the upper panel toward the wall to snap the buttlock into place. Work from one end of the new panel to the other, interlocking the entire top edge.

Can you replace vinyl siding?

Vinyl siding is durable and long-lasting, but it can get cracked or otherwise damaged. You can remove damaged pieces and replace them, but this requires separating the hidden joints that lock the pieces together.

How to Use a Siding Nailer Step by Step?

It is nice using siding nailer. If you want to use your tool correctly, you should follow the instructions given below step by step.

What is a Siding Nailer?

It is accurate for rubber and wood. It is a creation that solves all types of siding problems and leaves a perfect finishing like professionals. If you are connected with a siding job, then it is an ideal power tool for you. It will work effectively and save your time too.

What to Consider When Choosing the Best Siding Nailer?

Here are some things that you should consider while choosing the best siding nailer for yourself .

What is a nailer?

A nailer is a widespread tool for household and industrial works used by carpenters. Generally, there are two types of nailers available, siding nailer and framing nailer.

What are the different types of siding nailers?

There are three types of siding nailers. They are pneumatic siding nailers, cordless siding nailers, and coil siding nailers.

How to load a nail gun?

Load the nail gun: Load by pressing a magazine release and push that back into its place, making sure that it clicks perfectly.

Can you use roofing nailers to nail siding?

They are not installed flush. A gap between the head of the pin and siding is left. You can nail longer nails. But as they are more expensive, some try to use roofing nailers. But to nail larger nails, a siding nailer is the only option left for you.

What kind of saw is used to cut siding?

A bench or radial-arm power saw can speed the cutting of the siding or soffit. A fine-tooth plywood blade should be used with the blade installed in the reverse direction. Some applicators prefer a handheld power saw. In extremely cold weather, move the saw through the material slowly to prevent chipping or cracking (Fig. 7).

What tool do you use to cut vinyl?

Vinyl is easy to cut, trim, and score with a utility knife or scoring tool (Fig. 8).

What is vinyl siding made of?

It is manufactured primarily from durable polyvinyl chloride in several different profiles, including single, double, triple, vertical, and Dutch lap (Fig. 4). There are also various types of vinyl soffit (the material used ...

What is vinyl soffit?

There are also various types of vinyl soffit (the material used to enclose the underside of an eave or overhang). Soffit can be vented, solid, or a combination of the two (Fig. 5) and is designed to maximize air ow, preventing moisture accumulation and heat buildup between the siding and the house.

What is a corner post?

Corner posts are used to provide a finished edge at an inside or outside corner. The siding from adjoining walls fits neatly into the inside or outside corner post channels. Appropriate widths of channel openings are available to accommodate various configurations of siding.

Can you use a saw blade on vinyl?

7). NOTE: A saw blade set up in reverse direction should be used only for cutting vinyl. Do not attempt to use it on other materials such as wood, plywood, etc.

Where is the locking tab on vinyl siding?

As Steve Bliss points out at VINYL SIDING LOCK & NAIL FLANGES, all vinyl siding panels have a locking tab at the bottom of each panel that snaps over the top tab of the panel below .

What is an illustrated home?

The ILLUSTRATED HOME illustrates construction details and building components, a reference for owners & inspectors.

Can you replace vinyl siding without breaking it?

Your corner trim may look like that. The good news is that most vinyl siding can be removed, handled, or pieces replaced without breaking it.

Is sun fading normal with vinyl siding?

Watch out: you may find that even if you are using stored "new old stock" vinyl siding from the original siding batch that was installed on the building the color of the new siding may not be a perfect match with the older siding remaining on the wall. Depending on the siding color and specific product, some sun-fading is normal. The photo of a horrible vinyl siding installation job shown below illustrates a color mismatch that was probably unavoidable. But the other bad siding work discussed starting at VINYL SIDING INSPECTION & REPAIR could have been avoided.

Can you reattach vinyl siding to the bottom of the course?

Nancy there is a siding hook that can reattach the bottom edge of vinyl siding to the course below - I have posted a photo of the tool here. But to give accurate advice we need to know just what is the problem with your siding installation. Perhaps you can send us some photos.

How much does it cost to snap vinyl siding back in place?

The tool is available at most hardware stores and usually costs less than $10.

How far away from the other end of a tool should you remove?

Remove the tool when you are within 6 inches of the other end. You should be able to snap the end in place by simply pushing on the panel.

Can vinyl panels be swung together?

Each panel has a curved lip on the bottom edge, called the buttlock, that snaps into a track on the panel under it. Snapping panels together isn't difficult, but it isn't a job you can do with your fingers.